Jump to content
SAU Community

Recommended Posts

SOLD!!!

come and get it guys.

As topic says... i've spun a bearing but engine still runs and idles perfect, it's only when revved the tapping can be heard.

engine is out.

RB26 twin turbo engine comes complete with:

- turbos

- manifolds

- coils

- injectors

- new clutch

- new N1 oil pump

- new sump baffle kit

- all plastic covers

INFO - engine was reconditioned only 2500kms ago but over revved before running in properly(no rev limiter). therefore you should be able to replace the damaged bearing and maybe the rod, machine the crank and away you go. ive been quoted $1500-$2000 for the whole job. (i might fix it if it doesn't get sold)

PRICE - $2500 open to offers

CONTACT - i can be contacted on 0411607607 for a quick response otherwise a PM is fine.

at this point i'm not seperating anything so please don't ask.

cheers,

Kiefer

Edited by peakn7
not sure why,thought you had a sale pending you scanning the receipts and emailing me,have agreed the freight quote is reasonable :(

Peakn7 PMed me today, but you called it first, so its yours dude, ill pull out. If this engine is still here at the end of June then its mine.

Peakn7 PMed me today, but you called it first, so its yours dude, ill pull out. If this engine is still here at the end of June then its mine.

mate that's very gentlemanly of you....strength and honour :thumbsup:

any sensible purchaser would want to see receipts so deal sealed on receipt of same

Edited by Z24O
mate that's very gentlemanly of you....strength and honour :thumbsup:

any sensible purchaser would want to see receipts so deal sealed on receipt of same

np mate.

And yeh, would defenetly go check it out before making any payments. But yeh, this is a BARGIN.

ok guys, can't track receipts, they're with previous owner and he keeps telling me he can't find them but he'll keep looking.

engine is out and can be inspected.

PM's replied to.

still for sale at this point.

dont know what u guys need receipts for, its a cheap engine and receipts dont prove

a thing. Stop wasting peoples time, if u want the engine buy it off the guy,

good luck bud, free bump as well

dont know what u guys need receipts for, its a cheap engine and receipts dont prove

a thing. Stop wasting peoples time, if u want the engine buy it off the guy,

good luck bud, free bump as well

your in perth aren't you buddy,there's one for sale over here in o'connor complete with loom(no ecu) asking $2000....this ones been for sale on the forum for over a week now,guess a few other interstaters may wish to see receipts for something they are buying on good faith(no matter how cheap it seems),can't speak for locals in SA

Edited by Z24O

since you weren't interested in separating a month or so ago...how about now?

I am after the complete top half, head, plenum, injectors, coil packs, loom, covers, cas, turbo lines.

if you're keen, pm me how much you'd be after plus postage.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • As an ex-skyline owner Going off how these things are now "modern classics", I would keep the twins and just "refresh" bits that are required for reliable power and have a car you can take out for a cruise whenever you get the itch As a idiot who cannot leave things alone Going deep into the "rabbit hole" is a easy thing to do, as previously mentioned, once you start it becomes a slippery slope, wirh lots of supporting mods, and possibly rebuilds, and unless you have a bottomless pit of funds, the car can spend most of its life sitting in the garage,  broken, waiting for parts, or building more funds For a classic like a R32 GTR Basically, a reliable OEM+ refresh, that isn't a broken garage queen, is alot better than a car that you build, then break, then fix, then break again And it isn't just the engine you need to worry about, these beasties are getting on in age, and all parts are getting, and have got, expensive, the days of picking up cheap replacement engines and other driveline parts are well and truly over The funds not spent on going a single with quality parts, and with all the other other bits required to make it happen, could be spent on refreshing alot of other parts A wise man once said "If you cannot afford 2 GTR's, you cannot afford 1", I also believe he said this about 20 years ago when you could pick up a clean R32 GTR up for around $20k My advice for a R32 GTR (the one and only true Godzilla in my mind) is to think holistically about the whole car, the body, the power train, the suspension, the brakes, and the driveline SAU is a wealth of knowledge with decades of Skyline experience,  from stock, to OEM+, to modified to varying degrees, to full on or weekend or dedicated racecars, as well as full on money pits that rarely leave their garage Treat the old girl nice and give her what she deserves, you are a lucky man to own such a classic car  
    • For that price you could buy the hypergear turbo (big fan as I run one) and the Haltech ECU..
    • +1 for the Elite 2500. Get some new knock sensors while you are at it (pretty cheap), look up the TAARKS Nissan knock sensor kit. You may also want to get new coils (R35gtr) while your at it (assuming your on stock ones), as they are a liability. Mine started right up and idled fine on the base map. Also go MAP over MAF, as said above, Haltech make this super simple right out the box. Another fanboy of DBW here, Outsider Garage from your neck of the woods make some nice conversion gear for the R33 (that’s where I got some of my gear from).
    • Nvm ignore this I read it wrong
×
×
  • Create New...