Jump to content
SAU Community

Recommended Posts

I just filled up with V-Power racing for the first time (normally use BP ultimate).

I don't know if it's a coincidence or what but the car is driving like absolute crap. It started off missing as soon as I made any boost and deteriorated to the point where it is even missing at idle now.

The car was tuned on BP ultimate and has never run on anything else since then. Does anyone think the fuel is to blame?

I spoke to a friend who is fairly cluey with this type of thing and he said his Bosch 040 didn't like the V-Power racing either and mentioned something about ethanol enriched fuels being thicker than those without.

Anyone got any ideas? I advanced the timing a few degrees and that seemed to improve things slightly, but it still wasn't anywhere near behaving normally.

Either way, I am going to dump the fuel and go back to Ultimate and see if that resolves the issue.

Link to comment
https://www.sau.com.au/forums/topic/170793-shell-v-power-racing/
Share on other sites

possibly because its a higher octane fuel, better then anything else offered on pump. Harder for it to preignite, or even ignite for that matter. Hence why the tuning is normally required. Vice versa if you were to stick a low octane crappier fuel in then what you were tuned on originally, it would preignite and ignite a great deal easier, generally when knock sets in the most.

i've never had a problem. my GTR was tuned on 98. i put in the V power racing. ran fine. maybe even a touch better. the alfa race car, we had it tuned (yes it has carbies and a dizzy!) on 98. we've since run it on the v power racing and elf LMS and it was fine. It's not a major change I can't see how it made your car run poorly unless it was just a bad batch of fuel.

if it is pre-igniting you have a problem with a cylinder/piston. i think you mean detonation. they are 2 different things. pre-ignition is where there is a hot spot in the bore or piston that is igniting the fuel before the spark. on cars with carbies they will continue to run after you turn the key off untill the hot spot cools. and it melts your spark plugs, and usually ends in a warped head/cracked piston. detonation is where the fuel doesn't burn in a even pattern. instead of burning in a wave it just all ignites at once.

i don't think the tuning has anything to do with it, otherwise normal aussie built cars would run like crap when you put ultimate in there since they are only tuned for 91 octane fuel. i'd say it is a bad batch of fuel. i stopped using shell fuel after i went to a servo one night and an ambulance in front of me started then stalled before it got out of the driveway after filling up and wouldn't start again. it turned out there was water in the fuel. not sure if it was the servo's fault of a bad batch, but after that i stay clear of it just to be on the safe side.

ok i always thought that both were to do with the fuel mixture burning before it is intended to. ie. before the spark plug ignites the air/fuel mix. Whether it was to do with a hot spot or just the fuel burning unevenly was irrelevant. Thought it was the act of it occuring rather then what caused it. Suppose you learn something new everyday.

Thanks for the help, problem solved.

Stupid leaking cooler join.......Haven't driven it yet but it was literally hanging off :P I had the exhaust manifold off the other day replacing a blown gasket and mustn't have tightened one of the clamps enough.

I will stop bagging the V Power racing now :D

What fuel the car was tuned on definitely makes a difference, but i have ran vpower racing previously on my r33 and it ran good. My mate had issues with it in his bmw e46 325 though, he just tried it in his evo8 gsr yesterday and it seems to be running good as well.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I’m also conscious that e85 is slowly being phased out. Not all United’s have them anymore. Can’t take the risk of being low on petrol and assuming the servo will have it. 
    • MR HAMMER has said his piece. Painted up to avoid Rusty Rusty. Actually lines up well. (i.e it lines up the same as the unmolested GTR guard). Turns out the GTR Strut brace does foul on the bonnet vents ever so slightly. May need a little bendy bendy if intended to keep using with a strut brace. So spacing it out to clear the FAST102 is not an option. Annoyingly, the bonnet vents also foul on the heater lines running over the engine. Given this engine does not EVER require a heater, a delete loop is going to be used. Don't worry, the defogger uses the AC. The heater is basically "Do not use the aircon and turn the fan on". It will still be effective, I promise.... once I get the system regassed... Will have to revisit with unvented bonnet I suppose, and suitable strut brace. There's plans to do this and other things tonight and bleed brakes (there was a weep) and put the bumper back on, and take Good Friday morning - Because troubleshooting on the side of the road limping it home at midnight tonight is ... not very smart.
    • Thank you all for you assistance. I contacted Nistune regarding the support for the RB20DE along with my ECU Code (23710-10U00). They do have a map for it and added the RB20DE as a purchasable option now as well. They also added Malta as a Billing and Delivery options as this was missing. I was honestly amazed at their quick response and action, it took less than 24 hours. I also looked again at direct fit options for injectors, just in case I were to replace them. DeatschWerks seem to use a Bosch EV14 base and makes ones that fit mine at 440cc lowest, but also have 550cc at the same price. I tried looking for other direct fit options and managed to find one (also Bosch EV14 based) which includes a plug and play adapter on ebay. Did a small test with a Noid Light on the troubled injectors and all seems good, so they are pulsing properly electrically. One weird part is that they are missing on the same two cylinders as before I got the injectors cleaned. Mechanic also found this weird as he did not label the injectors and it is unlikely to have the faulty injectors be installed in the same cylinders.  
    • Nice, let me know how you find the 98 tune
×
×
  • Create New...