Jump to content
SAU Community

Recommended Posts

vic roads and on the odd occasion have light measurement detectors, i have seen em yet but iv heard bout it alot.

serious? wow thats a first ive head of it, fair enough...........

but thats vic roads? wat about the po po?

Its not up to the poilce to prove on the spot that it is 100% illegal, they dont have to.

They only to have to a "reasonable beleif" that the modification is not safe to issue a defect.

it is then up to the owner to proove the modification ( inc tint) is legal.

Commonly people who have tinted windows do get the darkest legal tint but it is on top of the factory tint or glaze and this makes the light transferance illegal.

if you want to check it your self, Repco sell a light transferance metre which is used to measure the amount of light that comes througha tinted window or glass based surface.

Its not up to the poilce to prove on the spot that it is 100% illegal, they dont have to.

They only to have to a "reasonable beleif" that the modification is not safe to issue a defect.

it is then up to the owner to proove the modification ( inc tint) is legal.

Commonly people who have tinted windows do get the darkest legal tint but it is on top of the factory tint or glaze and this makes the light transferance illegal.

if you want to check it your self, Repco sell a light transferance metre which is used to measure the amount of light that comes througha tinted window or glass based surface.

spot on, cops can deem something unsafe whether its legal or not ... if they beleive its unsafe, canary u for it, its your responsibility to get a rwc which should prove your car is legal, or indeed have to fix up a few things on the car itself.

i have heard that you can tint the qtr windows and rear windows darker and get away with it ... as long as the front two windows are 35% or greater ... but once again, depends on the descretion of the officer.

my old skyline was HELL dark ... my vlt was well below legal on every window, 5 - 7% i beleive ... difficult at night if there was no light around hehe ... looks great though...

anyone know about about this darker but legal tint??

my rear quarters say 'UV Cut glass' so i don't know if the glass itself is dark, or if there is a tint on it??

That glass is darkened from factory (ie it's not tint) and is street legal (ADR approved).

As for the regulations in Vic, not hard to find...

http://www.vicroads.vic.gov.au/NR/rdonlyre...E621/0/VSI2.pdf

Just for those who asked how to remove tint yourselves, you need:

- Hairdryer with extension cable to reach wall socket

- Razor blade (standard emo issue, come in little packets of 10)

Simply use the hairdryer to heat up the film from the inside of the car, then use razor blade to scrape away. Very easy, most of it peels off no problems, doing each window should take less than 10 mins.

Have fun!

anyone know about about this darker but legal tint??

my rear quarters say 'UV Cut glass' so i don't know if the glass itself is dark, or if there is a tint on it??

darker but legal tint?

Didnt you read the first page? :blush:

  • 1 month later...

Some insurance companies also check the percentage when the assessor comes out, usually first thing they check if they're interested in it.. and if it's too dark, and therefore unRW, they can argue that your car was unRW and they won't pay out a claim.

Depends on the company though, some companies will do anything to get out of paying a claim.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • I am using Motec M150.  I am not working on the car myself actually.  My workshop is giving all these info, they are quite reputable in the industry and are very familiar with Motec and RBs and have done a few big setups with VCam and single turbo on RBs.  In fact, they built and tuned my engine from day one.  But they are stumped with my engine at the moment and cannot work out how come the compression is so low with the VCam. They told me that they have now swapped in some Kelford cams (without the VCam) and can achieve around 130psi compression and the low end torque is better, but now the engine is doughy as.  It boosts and peaks at more than 1000rpm slower, with twin HKS GTIII RS, it doesn't get full boost until over 5000rpm. I have always thought the VCam was a bit disappointing at the low rpm. To a point I had to ride the clutch a fair bit to get up a small hill from stand still.  That was when I had a clutch.  Now changing to a 8HP, I don't have that luxury and this problem has become a major issue. I am beginning to think the VCam never work since the day it was installed.  Maybe it was just sitting at the most advanced point, that is why it went good at top end but very ordinary at the bottom.  Therefore, with the help of the Holinger 6 speed and paddle shift, as long as it was moving, it drove pretty good.
    • yeah, there's a country that recently started importing Skylines, I blame them.
    • I don't have a printer, but could at least attempt to make a printable model.
    • If you do make them, im sure you would have a number of buyers.. Every GTR I've been in have rattly door windows 
×
×
  • Create New...