Jump to content
SAU Community

Any Cooling Issues With Radiator Fan Clipping?

benl1981

By benl1981,
in Engines & Forced Induction

 Share

Recommended Posts

benl1981 Grand Master

benl1981

Posted
Posted (edited)

Seems like I have to take quite a piece off the top corner of the rad fan. A long triangular piece..

Has anybody had any cooling issues associated with doing this?

Any effect on coolant temp in summer in traffic?

any body had issues with fan being out of balance?

Thanks

Edited by benl1981
Al Grand Master

Al

Posted
Posted

I have clipped mine too. It has been like that for about 5yrs and have had no issues with temp, fan blades or fan clutch.

Best to make a small stencil of the cut section, so that you take off an equal amount from each blade. This will help to keep the balance fairly even.

benl1981 Grand Master

benl1981

Posted
  • Author
Posted (edited)

Hey Al,

Just looked through some old posts - were you the one that had your water pump fail.? Do you think it was due to the fan being out of balance..

I guess there isn't much weight in the plastic fan so shouldn't matter too much.

Thanks for the reply

Edited by benl1981

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • silviaz
      R34 GTT idle problem

      By silviaz · Posted

      Ah right. Maybe my rb just loves chewing through batteries lol.
    • MBS206
      R34 GTT idle problem

      By MBS206 · Posted

      On the R34 can't you just unplug the IACV? This is the way I've always done it on the R33. Disconnect IACV, get it idling around 650rpm, and then do a power reset on the ECU to get it to relearn idle (factory ECU).   The big reason no one has touched on as to why you'd want to get the base idle right, is that it means the computer needs to make smaller adjustments to get a good idle at 700-750rpm.   Also, cleaning the IACV won't normally make the car suddenly idle lower or higher. The main issue with the IACV gumming up is that the valve sticks. This means the inputs the ECU gives, aren't translating to changes in air flow. This can cause idle choppy ness as the ECU is now needing to give a lot of input to get movement, but then it moves too far, and then has to do the same in reverse, and it can mean the ECU can't catch stalls quickly either.
    • MBS206
      R34 GTT idle problem

      By MBS206 · Posted

      12.8 for a great condition, fully charged battery. If the battery will only ever properly charge to about 12.2V, the battery is well worn, and will be dead soon. When I say properly charge, I mean disconnect it from the car, charge it to its max, and then put your multimeter on it, and see what it reads about an hour later. Dieing batteries will hold a higher "surface charge", but the minutest load, even from just a multimeter (which in the scheme of things is considered totally irrelevant, especially at this level) will be enough over an hour to make the surface charge disappear.   I spend wayyy too much time analysing battery voltages for customers when they whinge that our equipment (telematics device) is causing their battery to drain all the time. Nearly every case I can call it within about 2 months of when the battery will be completely dead. Our bigger customers don't even debate it with me any more ha ha ha. A battery at 12.4 to 12.6 I'd still be happy enough with. However, there's a lot of things that can cause a parasitic draw in a car, first of which is alarms and immobilisers. To start checking, put your multimeter into amps, (and then connect it properly) and measure your power draw with everything off. Typical car battery is about 40aH. Realistically, you'll get about half this before the car won't start. So a 100mA power drain will see you pretty much near unstartable in 8 days.
    • GTSBoy
      R34 GTT idle problem

      By GTSBoy · Posted

      Car should sit at 12.2 or more, maybe 12.6 or 12.7 when fully charged and happy. If there is a decent enough parasitic load then it will certainly go lower than 12.2 with time. You can't beat physics.
    • silviaz
      R34 GTT idle problem

      By silviaz · Posted

      Ok guess I can rule out the battery, probably even the starter and alternator (maybe) as well. I'm gonna clean those leads and see what happens if it's still shit I might take it to an auto electrician. Unless the immobiliser is that f**king heavy, but it shouldn't be.  If I start the car every day, starts up perfectly never an issue. Isn't 12v low, shouldn't it be around 12.5v?
×
×
  • Create New...