Jump to content
SAU Community

Recommended Posts

Hi guys

I have a used Video Card which i don't need anymore

Its a Leadtek A7600GS

I brought it about a month ago and had it on my comp for about a week then i got my Motherboard chnaged and now i have no use for it .

Here are the prices i could find for it new online

http://www.shopbot.com.au/p-48511-728612.html

I paid 200 myself but if anyone is interested you can pick it up for 100

I live in western sydney in the penrith area i would prefer not to have to post it.

But it does come with all the CD's and the Box it came in..

DCLEA093B.jpg

WinFast A7600 GS TDH

Features:

· Built for Windows Vista

· Proven Shader Model™ 3.0 technology support

· Fan noise under 30 dB

· Supports CineFX™ 4.0 engine & UltraShadow II Technology

· Supports Intellisample™ 4.0 technology

· Supports HDTV, Dual link DVI and D-Sub output

Specifications:

GPU - GeForce 7600 GS

Graphics Bus - AGP 8X

Memory size - 256MB DDR2

GPU/Memory clock - 400/350MHz

Memory data rate - 700MHz

Memory Interface - 128-bit

Memory bandwidth( GB/sec.) - 12.8

Fill Rate(billion texels/sec) - 4.8

Vertices/sec (million) - 500

Pixels per clock (peak) - 12

RAMDACs (MHz) - 400

Connectors - HDTV-out / Dual link DVI-I/D-Sub

Multi-Display - Yes

So if any of you guys are interested PM Me OR CALL 0421822912

Thanks

Pac...

Edited by Pac
  • 2 weeks later...
  • 4 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • I’m also conscious that e85 is slowly being phased out. Not all United’s have them anymore. Can’t take the risk of being low on petrol and assuming the servo will have it. 
    • MR HAMMER has said his piece. Painted up to avoid Rusty Rusty. Actually lines up well. (i.e it lines up the same as the unmolested GTR guard). Turns out the GTR Strut brace does foul on the bonnet vents ever so slightly. May need a little bendy bendy if intended to keep using with a strut brace. So spacing it out to clear the FAST102 is not an option. Annoyingly, the bonnet vents also foul on the heater lines running over the engine. Given this engine does not EVER require a heater, a delete loop is going to be used. Don't worry, the defogger uses the AC. The heater is basically "Do not use the aircon and turn the fan on". It will still be effective, I promise.... once I get the system regassed... Will have to revisit with unvented bonnet I suppose, and suitable strut brace. There's plans to do this and other things tonight and bleed brakes (there was a weep) and put the bumper back on, and take Good Friday morning - Because troubleshooting on the side of the road limping it home at midnight tonight is ... not very smart.
    • Thank you all for you assistance. I contacted Nistune regarding the support for the RB20DE along with my ECU Code (23710-10U00). They do have a map for it and added the RB20DE as a purchasable option now as well. They also added Malta as a Billing and Delivery options as this was missing. I was honestly amazed at their quick response and action, it took less than 24 hours. I also looked again at direct fit options for injectors, just in case I were to replace them. DeatschWerks seem to use a Bosch EV14 base and makes ones that fit mine at 440cc lowest, but also have 550cc at the same price. I tried looking for other direct fit options and managed to find one (also Bosch EV14 based) which includes a plug and play adapter on ebay. Did a small test with a Noid Light on the troubled injectors and all seems good, so they are pulsing properly electrically. One weird part is that they are missing on the same two cylinders as before I got the injectors cleaned. Mechanic also found this weird as he did not label the injectors and it is unlikely to have the faulty injectors be installed in the same cylinders.  
    • Nice, let me know how you find the 98 tune
×
×
  • Create New...