Gtr Diff Into Gtst R32

[dead32]

hey guys just wondering to do this conversion, what extra is needed? i understand that the diff center, half shaft's is needed? what extra? and how does it all bolt? i.e any dodgy mods needed? do the gtst hubs accept the gtr drive shafts? my diff open wheeled once and i wana sort this out before it gets worse. cheers

[lows_13]

Ask Cubes, he's done this mods to his R32

[Cubes]

Not possible..

However, there is a gtr style/mech center around for the R32/S13 pumpkin that runs the gtst/s13 spline count.

There's 2 different types as far as I'm aware. The standard GTR style with a soft engagement and what is often referred to as a nismo center with more clutch packs and shallower ramps that provide a quicker lock.

The later nismo is the one to get.

Another option that 'may' be possible is to use an 87-89 300zx long nose r200 lsd center in your short nose. They 'Apparently' they bolt in to the short nose housing without issues. I haven't done it myself so I don't know first hand.

[Abo Bob]

So what have you got? GTR diff, housing, and different tail shaft? Nismo half shafts and GTST drive shafts?

[Cubes]

I've had it out and apart recently.

Its just a regular S13/R32 GTST housing, nismo center and 5bolt half shafts.

The GTR/R33/R34 diff housings are slightly different to the R32 GTST/S13.

[skylinegtts]

so the housings are slightly different.

would using a GTR center in a GTSt housing with GTRorGTSt half shafts work?

[sh@un]

doesn't the whole sub-frame assembly bolt in from a BNR32?