Jump to content
SAU Community

Drag results ...

hippy

By hippy,
in South Australia

 Share

Recommended Posts

Freebaggin Proficient

Freebaggin

Posted
Posted

Clint32,

Shit, I saw your reply and thought doh myself, as I forgot about your runs. I assumed the E/Ts were better than mine due to the very quick top end. Get your launch OK and it'll be a 12s job for sure. Chris32 had trouble getting a good start/rpm balance too.

Bugalugs Enthusiast

Bugalugs

Posted
Posted

Thank u Ivan/RPM Performance for a great day.

It was my first time down the 1/4 so it was nice to do it without a big crowd.Part of the reason why i wanted to do this was to backup my dyno results from the dyno day at Tilbrooks and prove that it was no fluke.

My best was [email protected] 60` and as Freebags said i did do a 106.99mph 13.5.

It was good to catch up with you guys again and when i'm settled into my new house i should be able to get out crusin again.

Freebaggin-I'm not sure how long that gasket is going to last being that you are missing 2 studs.You may have to order that T88 earlier than you thought so they can fit and fix all at once to cut cost.

Grepin-I`m still baffled by your low mph.I spose just let WW2 begin and kick F/B`s ass then.

Matt

Chris32 Veteran

Chris32

Posted
Posted

Yep, it was a top day, big thanks to RPM

I had a few good runs, but I really struggled to get it off the line. My best run of the day was 14.03 @ 104.9mph with a 2.5 sec 60ft

Don't reckon the hard track style suspension and cheap Falken's helped much, maybe next time I will get some decent rubber and try and knock 1/2 a second of my 60ft times.

At least after 8 runs nothing broke

Chris

Maxx Veteran

Maxx

Posted
Posted

Thank u Ivan/RPM Performance. Specially borrow me the tyre pressure gauge :rolleyes:

never been to drag race b4, i was VERY excited. have 2 15sec pass with 32 psi tyre ,then i borrow ivan's gauge and release the tyre pressure to 22psi and done a 14.5.

being the slowest skyline (tubro) of the day,[email protected] with a 2.299 60'.With same mod of other member(exhaust, intercooler, boost controler) I found that even i have a OKAY lanuch, my car start get slow down at 2 or 3 gear, (seems the boost pressure can't keep at what i set) i try to adjust from 12psi to 13.5psi and guess what, i did worse time in 13.5 psi - [email protected]

i have order a e-manage from japan this morning after doing some disappoint time. With better tyre, hopefully i can break into 13.5 at the next meeting.

after 9 runs, my heavy duty clutch is not heavy duty anymore :)

Maxx Veteran

Maxx

Posted
Posted
Originally posted by hippy

agree with u skyppy .. i saw alot of ur runs tin .. u also got not so good launches .. that greddy emanage would cost something like 1k?? spend it on ur suspension .. lighten flywheel ... tyres ... its all power and torque ... not that i know anything about drag racing .. :rolleyes:

i already got tein HR suspension on my car

i was quite interest at lighten flywheel, but someone told me they will affect the drive quality. Actually anyone who have it, can u told me what is good or bad after having it? but anyway, it won't be purchase until i blow my clutch

tyre was a definate, they are quite worn, i am still waiting my aftermarket rim arrive from oversea, so tyre will be purchase when the rims land.

from the MPH i run, even i got better tyre, i might be just able to break into 13sec, as my aim is low 13 or even high 12, i need more power(more boost). When i get the e-manage, i can have more power and even running higher boost, i can buy them for around $700, and i already have a e-01 to match, rather than a pfc for doulbe the price, it seems not a bad idea...

Cubes Grand Master

Cubes

Posted
Posted

Lightened flywheel's only really improve your acceleration from lower in the rev range. When at the drags you are always operating at the top end of the rev's i.e 5500-7000rpm so apparently the lightened flywheel is not benificial.

I have a chrome molly lightened flywheel and noticed at the lights it was easier to take off, gears rev match heaps quicker. For the street lightened flywheels are quite good. No loss of drivability or fuel consumption.

Maxx Veteran

Maxx

Posted
Posted

the best things to improve the time instead of spending more on the car, is improving my launching skills and shifting skill.

i think i shift alright... :D

Maybe a bit of weight deduction on my car, but more important, is LOSTING weight myself!! :D

i was 75kg when i come to Aus. 3 years ago, and i am near 100kg now, if i can lost some weight to i used to(75kg), the car is 25kg lighter,plus take the audio (2xkg) and spare tyre (10kg?)out, definatelly can be 1/2 sec faster!!!;)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      Rb25det Belts Change

      By GTSBoy · Posted

      Yes. It's either "2 wires", or 1 wire, depending on how you look at it. It is the connection that ties the battery -ve to both the chassis and the engine. Every electron that goes in or out of the battery goes through those 2 small spots (on the inner guard and on the engine block). If those are not clean and tight, then shit starts to suffer. Yeah, but measure it again cold in the morning, after it has had hours to rest. You can't usefully test the charge state of a battery immediately after it has been running because the alternator puts a surface charge onto the plates that takes a while to soak in and balance out. It will always read higher, and potentially look properly healthy, when fresh off of charge. But hours later it can look a lot less healthy. It's also worth measuring the battery voltage while cranking, although this can be difficult with a typical DMM because the screem update rate is so slow on most of them. An analogue voltmeter is actually a better tool for that. If the voltage drops too far while cranking, it is a sign of a poor battery. Although I don't think we're necessarily looking for a weak battery here - just wanting to exclude it.
    • alexburns
      GTR Festival (Aus) - 2025 - Stagea Alley

      By alexburns · Posted

      https://www.facebook.com/share/15ZMn5oXtc/ Updated Event (so its not private and can be shared easier)  Attempting to coordinate a big push of Stagea's to this years GTR Festival. Great event last year and hoping for the same this year.  Discounted tickets 20% off for their various tickets until the 3rd of Feb Monday. Drags, show and shine etc.  I've emailed them to ask to set a location aside for the Stageas for the show and shine - they are happy to do so if we can get them numbers, I'm happy to keep track of that. Entering as Nismo category.  I'll be road tripping up from Melbourne, would be cool to convey if people are interested, maybe there is SAU convoys from each capital? If you have ideas about that let me know.  https://gtrfestival.com.au  
    • Skip33
      Series 2 R33 GTS25T?

      By Skip33 · Posted

      Does have series 2 airbag steering wheel and passenger side airbag also.
    • Skip33
      Series 2 R33 GTS25T?

      By Skip33 · Posted

      Do I have a series 2 or has someone spent money to have a series 1/1.5 look like a series 2? Everything I have read says the series 2 came out in 1996. I have a car manufactured in December 1995. The exterior, engine and interior are all series 2 other than the dash facia is series 1. Paint code is also kr4 that I believe is only available on a series 2. I have a VX Vehicle History Report and it says Grade: GTS25T TYPE M2 Manufacture date: 1995-12 Make: NISSAN Model: SKYLINE Body: E-ECR33 Grade: GTS25T TYPE M2 Engine: RB25DET Drive: 2WD Transmission: F5
    • silviaz
      Rb25det Belts Change

      By silviaz · Posted

      I went to Repco to get them to test the battery using their tester (not a volt meter), alternator shows 14.3v when running, and when the car was off after the it was on full load I think it was 12.6v but the guy said it was all good. Terminals are all clean, no corrosion. Though I coulda sworn when I tightened up my alternator belt the car idles a bit higher and the steering wheel shakes a bit until it's warmed up. I wanted to confirm for the earth cable/s, are you referring to the 2 wires that are bolted onto the frame rail under the battery? I might be overthinking this a bit.
×
×
  • Create New...