Jump to content
SAU Community

Recommended Posts

Gday, I was wondering what a rb25det Stagea 4wd engine is worth these days? I picked one up hoping to make my future Hr31 Passage a 4wd, cept then I found out whats required to do the conversion :woot: .

It doesnt have a crank angle sensor, starter motor, or turbo but comes with an automatic ECU. I also have 2 automatic gearboxes for it aswell, I was told that they are almost as strong as gtr gearboxes? What are they worth? and are they interchangeable with gtr engines?

One of the gearboxes came from a r32 gts4 and the other from (apparently) a r33 gts4. Cept I think the second one was actually from the same car, a stagea. They listed the engine as a r33 gts4 rb25det so I'm guessing they made the same mistake with the gearbox. - are both gearboxes the same? (considering that the r33 one is actually a stagea box)

Will pics help? I have some ready to post if it'll help.

Edited by Danzzigger
Link to comment
https://www.sau.com.au/forums/topic/171811-rb25det-stagea-engine/
Share on other sites

Pretty hard to say...

I reckon you could get about $2.5k for the engine if all parts were there and working... espessially the turbo... so it would have to come down from there.

For the gear boxes... a gtst gear box would normally go for about $1k, i don't know the gts4 gear boxes well, but considering its a non-turbo, if its similar to the gts, it is not as strong and the ratios different... if its a stagea box... i have no idea

Hope this gives you a bit of an idea

If anyone has a different opinion... feel free to say so... cause this is a ruff estimate based on what I've seen :P

stagea egine is the same as a 33 engine and what do u mean with the auto boxs being a strong or interchangable with a GTR which are all manual.. i think anyone stupid enough to put a auto in their GTR doesnt deserve a GTR

with the bits missing u would be lucky to get 2K for the engine, and well only ppl with stuffed auto's would buy a auto box but i wouldnt think a auto box be worth anymore then a 4-500

ok thanks guys

I never knew gtr's where all manual, alright sweet learn something new everyday. So the GTS4 Auto obviously wouldnt be as strong, cause I have a r32 and stagea one afaik and the r32 would be a non turbo since r32 gts4's only came with rb20de's too. Is there a way to find out what the gearboxes are from? coding somewhere or a pic mabye?

I've come down to the decision to ethier keep the engine for myself and change the sump, or I'll sell it and put in a N/A engine. I picked up this engine pretty cheap though, and I'd rather utilize it if possible. I want to stay out of trouble with my engine so I was thinking since the car comes with a rb20det (red top) mabye I should just get a rb20de (which I already have) and use that cause then the compliance plate will say rb20det and I can say I just took the turbo off :rolleyes: or won't a rb25de be a issue with the cops anyway? I also had the idea of sticking the coil cover from the rb20 on the rb25 so it says 2000 instead of 2500.

I was told that you could run a turbo engine as a N/A engine, cept you would just loose a bit of performance, how much performance approx?

Edited by Danzzigger
... So the GTS4 Auto obviously wouldnt be as strong, cause I have a r32 and stagea one afaik and the r32 would be a non turbo since r32 gts4's only came with rb20de's too. ...
R32 GTS4 was a RB20DET. Mine (manual) has handled 180 kw through all 4 wheels, so I don't doubt the gearboxes are strong enough. The R33 GTS4 was N/A, because the RB25DET was almost as powerful as the RB26DETT.

You will have to swap the rocker covers if you want to use the RB20 valley cover (bolt pattern is different), but then the PCV system is different between the 2 engines.

If you run a RB20DET as N/A, I would have money on your 3-legged dog in a 1/4 mile sprint.

I dont think the stagea gearbox is the same as any other Nissan auto's. Ratio's are different and i beleive there is some problem with the bolt up of Stagea gearbox's to non stagea rb25. Dont quote me because i was a bit surprised about this when i heard it. Maybe it is the back of the auto box that is the problem rather than the bolt up to the motor.

R32 GTS4 was a RB20DET. Mine (manual) has handled 180 kw through all 4 wheels, so I don't doubt the gearboxes are strong enough. The R33 GTS4 was N/A, because the RB25DET was almost as powerful as the RB26DETT.

You will have to swap the rocker covers if you want to use the RB20 valley cover (bolt pattern is different), but then the PCV system is different between the 2 engines.

If you run a RB20DET as N/A, I would have money on your 3-legged dog in a 1/4 mile sprint.

Ah yeah, sorry rb20det on the r32 gts4 and rb25de on the r33 gts4. Are you saying the reason they didn't come with a turbo is cause it was too close to the performance of a GTR? Interesting....

The valley cover, ok now I know what its called lol. So the mounting bolts are in different locations are they? Oh well. Whats this PCV your talking about? - still a n00b :)

And running a turbo engine N/A will be really sluggish... that means I'll have to sell it, it isnt worth changing the internals just to put it in my car is it?

I dont think the stagea gearbox is the same as any other Nissan auto's. Ratio's are different and i beleive there is some problem with the bolt up of Stagea gearbox's to non stagea rb25. Dont quote me because i was a bit surprised about this when i heard it. Maybe it is the back of the auto box that is the problem rather than the bolt up to the motor.

So your saying that the rb25det in a stagea is different than in a rb25det gts r33 skyline? (mounting)

Is the front diff (4wd sump) also different than r32 gts4's then? or are they all the same (including GTR)?

I dont think the motor is different but i have been told that if i ever blow up my gearbox (i own a stagea) that the only Nissan box that will fit is the Stagea box. As i said maybe it is something to do with the driveshaft end rather than the motor side. I am just passing on what an importer told me. He was looking for a replacement box and had tried a few other (not certain which) but said only the Stag box would work.

hey guys what do I do on the gearboxes, should I post it elsewere? can someone give me some links to Pics of the different gearboxes or something? I can get information on them, cept they are on a palete packed away so I don't want to get them down then find out no one has the answers im after.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


×
×
  • Create New...