Jump to content
SAU Community

Recommended Posts

As the topic says...

I need a good fibreglass moulder, need to get a fibre glass cover moulded on to my two side mirror.

Been hearing some shocking moulding stories, parts falling off or cracking up due to extreme heat or wet weather.

I need a professionally, quality job done..

Any sudgestions?

Cheers

Link to comment
https://www.sau.com.au/forums/topic/171938-need-a-good-fibreglass-moulder/
Share on other sites

got a mate that works from home, ex repirer for composites at ansett. does alot of work with formula fords now and their nose cones as well as other glassing jobs. he has no over heads to pay so is genearlly alot cheaper than others out there that own shops.

if u want more details let me know and ill give em to ya.

ps, does alot of bonet humps for those out there that want them and also does hot rod work for any1 interested

Troy! you're still kicking around here i see! :) How goes the yellow beast?

saw a R33 a few months back with what looks like the exact same shape bonnet bulge you see on the XR8's, but had "skyline" written down the sides of the bump. Actually looked kinda neat, same font... yellow bonnet, black stripes down the side of the bump and lettering in white, same font as the XR8's.

this is a good thread, i was after some chop-chop action, might give a few of these ppl a buzz

  • 2 months later...
got my rear bar done at maxspeed in westside

they did a pretty good job...haven't faulted it yet

Does anyone know where and what Maxspeeds contact number is?

When you say "westside", you mean Western Suburbs?

I googled maxspeed melbourne, couldn't get anything ;)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • So....to find any R chassis part number, get your VIN (will be something like ER33-xxxxxx for you) and go to: https://www.amayama.com/en/genuine-catalogs/nissan and enter it. From there you have access to a web version of Nissan's part system, FAST. It is a bit tricky to get used to, so maybe have a shot and post up what you think.  You can also search by general model but note in some cases your car might have different options so VIN is safest.  On diagram 211 I got 14075-75T16 for Connector, Water Hose If I search for part 14053‑21U10 that you posted, that is also a water hose but not the one bolted to the plenum and 14075‑04U00 is the fitting where the water hose goes into the block.
    • Yeah now we are talking I much prefer coolers in the front middle because it lessens the chance of a small bump to a corner stopping the whole event. I was thinking the AT cooler can move out of the radiator, delete the AT/engine coolant interwarmer and mount a separate cooler with a thermoswitch somewhere further back as is common in racing, that would be one thing. Beyond that, the engine oil cooler is an obvious one to move to the wheel arch, potentially one on each side, but unused space is an issue. I did have a earlier pic with the bumper off but it doesn't show how busy the corners are: DS is full of the auto driving sensors and PS is totally fully of windscreen washer fluid reservoir But ultimately I was hoping to keep the AC, and the water/air heat exchanger is fundamental so it is not just the radiator that needs to be in front BTW here's airflow to the rad as it ran at the track (one horn is gone now and I'll remove the lights next time):
    • your right the maps for Australia came out in 2017 but are 2010 maps. i got the updated maps SD card put it in and it was the same. Same maps in my Brothers Nissan Patrol. 2020 i think his car is
    • Yeahhhh, the costs have killed me. Spent more than the cost of an engine rebuild and it most mostly servicing and a tune lol.
×
×
  • Create New...