Jump to content
SAU Community

Recommended Posts

As the title suggests, do many of you have a lot of smoke comming from your exhaust under full acceleration?

I was driving with my mate behind me and i redlined 2 gears and he said there was a lot of smoke comming out the back.

Now I know that this is expected as the engine will pump a lot of petrol so the car does not run lean, but what are your experiences? I have a 3" turboback system... I think my air filter (pod) is a bit dirty too, but oil is fresh and its more a black smoke and only happens under full throttle and when revved right out...

Link to comment
https://www.sau.com.au/forums/topic/172085-smoke-from-exhaust/
Share on other sites

I use to get this too - my mechanic Nismo VIC said that it's the fuel pump, my Borsch puel pump and aftermarket ECU was pumping too much fuel and hence the vehicle built too much at high revs making it too rich. He got it tuned again and recommended that I only run Shell's V-Power fuel for a while. Did it for around 2 weeks, noticed that the smoke is more fine and less cloggy - moreover, performance is more responsive too.

I think you should get it tuned again plus run better fuel (if you are not already).

Good luck bro.

It can be anything. As Sambo33 said, black smoke is usually fuel. My 34 was perfect with factory nismo exhaust but as soon as I replaced it with Xforce exhaust (plus pod)....under full acceleration only black smoke gets produced. Anything after market will confuse the computer...with after market exhaust and pod more fuel is getting dumped to compensate for the power gain...so as a result more smoke. My 180, R33 and Rexie all did that as soon as I started changing things on them but never had any problem what so ever.

It can be anything. As Sambo33 said, black smoke is usually fuel. My 34 was perfect with factory nismo exhaust but as soon as I replaced it with Xforce exhaust (plus pod)....under full acceleration only black smoke gets produced. Anything after market will confuse the computer...with after market exhaust and pod more fuel is getting dumped to compensate for the power gain...so as a result more smoke. My 180, R33 and Rexie all did that as soon as I started changing things on them but never had any problem what so ever.

Well that makes sense, those are the EXACT same mods I have, (x-force exhaust & a pod)... and I really think it is running too rich like others have mentioned. I have never tuned the car in the first place, i put a boost gauge on purely for looks and it says my car is running 0.85 bar but it is stock bar the mods mentioned and it is not boosted!!

The only issue is that I have heard that getting a tune/dyno costs like $700??? That seems awfully expensive!

had that happen to me once - it was more like a puff of smoke......if its continuous then be worried

The smoke is petrol, there is so much cause the engine is receiving a lot of petrol... the engine is protecting itself if anything, so its not something to be worried about, but rather something to get fixed so it can run at its optimum.

yeah, those mods aren't gonna be pushin you to 12 pounds

I agree, plus my mate has the exact same car with same mods (except exhaust is nismo not x-force) plus his ecu has had remapping, and his car is just under 10 pounds, he has to boost his car to get to 12pounds which does make sense.

had that happen to me once - it was more like a puff of smoke......if its continuous then be worried

puffs of black smoke are cause by ur recirc or blow-off valve, basically its ur engine running very rich as the air recorded to go into ur chamber by the AFM is lost. thats a pretty basic run down, theres more to it but basically its not too much of an issue and is a common thing for stock tuned cars, and even tuned cars. if its white smoke ur looking at burning coolant meaning usually head gasket, if its grey ur looking at oil which can be from a number of things.

just free flowing exhaust i reckon did you actually bounce of the limiter or just get into the red area.... i was driving behind a vz ss the other day it oviously had a free flowing exhaust system on it sounded nice... he was just cruising along and dumped it back a few gears and bounced off the limter like 3 time he had a bit of black smoke coming out i think its just the norm.

Well that makes sense, those are the EXACT same mods I have, (x-force exhaust & a pod)... and I really think it is running too rich like others have mentioned. I have never tuned the car in the first place, i put a boost gauge on purely for looks and it says my car is running 0.85 bar but it is stock bar the mods mentioned and it is not boosted!!

The only issue is that I have heard that getting a tune/dyno costs like $700??? That seems awfully expensive!

$700 is too expensive. Even a aftermarket computer tune up shouldnt cost that much.

Ring up Adam from JEM (www.jem.com.au)

His pretty good, I've used him only once before when I first got my R34 (Workshops such as Pac, Pro Form etc use him)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • There are several aftermarket options available, from not-too-painful moneyhttps://justjap.com/collections/driveshafts-bearings/products/d-max-reinforced-replacement-rear-driveshaft-set-fits-nissan-s13-s14-s15-r32-r33-r34-c35 and  https://justjap.com/products/crank-motorsport-billet-rear-axles-fits-nissan-skyline-r33-gts-t-r34-gt-t?srsltid=AfmBOorQk4xkGUa98kO7v2ePLUiNt-HRrM2AwWNw9mbSIVE1ujBVwY__, all the way up to The Driveshaft Shop https://driveshaftshop.com/skyline-cv-axles/
    • Yeah based on old XRC5964S specs, it looks to be roughly GTX3576R sized? But this 5964S compressor will flow 90lb airflow somewhat similar to the compressors in both the GTX3584RS or G35-1050.. I fully expected the 0.64 rear A/R to choke up top - seems way too small from typical convention - but these are seemingly beneficial over the prior 0.82 results.. Be interesting to see if he comments on the EFR question in that thread - he mentioned in a prior video that BW EFR's were the "cats pajamas 10 years ago", but by the sounds of things all his kits have been using Xona for quite a while now.
    • Yeah it’s still got the oem manual gearbox and clutch, only kinda mods are a blow off valve, coil overs, and a aftermarket intercooler. Also had it for about 2 months now with a lovely midnight purple paint on it.
    • Yeeeppp, been following a lot of the testing on the latest Xona stuff and there are some mental results.  He also went over 1000hp @ 4 hubs on his Mainline with a XRE6364S (63mm) which was also well into the 20psi range before 4000rpm on a 2.5. Crazy stuff. Fwiw the XRE5964S is basically the modern equivalent of their old HTA3582 - would drive nicely enough on an RB25 or 26, but proven capable of a huge amount of power if you want to spicy with rpm tho even at sane boost levels will make stout numbers 
    • The axels in my R33 seem tired, and have a bit of play in them. I cannot find any new of course, not interested in buying used, but I am looking to see if anyone can identify some cross compatible axles. In the states I have seen suggested for S chassis the J30 axles, however for the skyline (as best I can tell) the lengths are about an inch off (2.5cm) on both sides. R33 my measure L 22" R 24.5" GPT L 22.5" 24.25" J30 L 23.5" 25.5"  so shaft length is probably an inch wider. Not sure if someone has another still remanufactured option besides the J30. I figured worst case I can buy a pair tear them down and swap the center shaft. My other option was reaching out to GSP to see if they cannot piece together a set, since the axle stubs are still manufactured, I wouldn't think it be that hard to find a shaft or make a shaft work. 
×
×
  • Create New...