Help, Wheel Placment

[wolfwood]

hey all i need a bit of help with my ceffie, for some reason my rear wheels sit further back in the wheel arches then there sapost to, its both sides as well.

i think it might be because i have rb26 and 33gearbox so maybe the tail shaft is too long and pushing the hole rear end backwards, is this passable.

please help

ta ben

here is a pi of who it sits...

[1400r]

see my reply on ns

[wolfwood]

i have but need more help..

[robots]

NS like nissansilvias ? Link pls ?

[daisu]

NS like nissansilvias ? Link pls ?

www.nissansilvia.com (commonly referred to as NS.com or NS)

Alot of people frequent both SAU.com and NS.com

[wolfwood]

yay for reply but they don't really help me, as far as i know i need adjustable traction arms and might be able to set it up to pull the wheels into the rite position.

were could i get a set from and how much would they cost. a link would be good cuz i couldnt really find anything

ta ben

[Mr Eps]

wtf???

no really... Wtf!?!

never seen that before, perhaps it could be an idea to get in touch with a suspension specialist?

[D-limo]

Wow..

Wrong cradle and/or control arms?

[wolfwood]

^^^ i dont know thats y im trying to find out.

so ppl arnt really sure hey, not a common problem, strange. ahh this sucks i cant take the car anywhere to get looked at so yer...

anyone got other ideas.

[D-limo]

Have a good look for any part numbers on the arms and cradle.

Bit hard to tell from that angle but toe looks fairly neutral?

[Kaido_RR]

i had a similar issue but on front left wheel, it turn out to be the castor was total setup wrong. dont know if u can adj the castor on the rear thou

[wolfwood]

um toe is all good, and i have the smae problem on both sides so something is f**ked up.. im now running s13 coilovers in the back. im not 100% sure but i think before i installed them i didnt have this problem, although it was alot higher so yer...

the arms and the cradle seem to be the original parts, i do how ever have adjustable after market rear toe arms and after market rear camber arms...

[toffy]

it is a common problem, theyre all like it, yours just looks worse because you have 18"s , adjustable suspension will fix it

[wolfwood]

oh okay, so if i just get adjustable traction arms i should be able to fix the problem? if so were can i get some

[wolfwood]

well on further inspection its only the one side where the wheel sits further back so im assuming the adjustments are wrong on one side or something is bent, will just have to wait till i can take it to a suspention shop so they can set it all correctly, anyone know of a place on the goldcost or even brissy that i should take it to?

ta ben

[D-limo]

option1garage

3268 1113

7 Remora Rd

Hamilton , Brisbane

[wolfwood]

oh okay, thakns

ben