Jump to content
SAU Community

Recommended Posts

do your self a favour brother invest in a genuine HKS SS blow off valve with adaptor its not extream flutter or cost (external waste gate = flutter sound) but its sounds almost as good in its primary dump stage (lower boost levels through gears) dont be a boggie MF with your pride n joy it will thank you in the long run GL.

Edited by SXY-33R
hmm its really that simple huh

It sure is. It's about a 10min job(drink the coke, take off bov, trace shape then cut). I did it a while ago, but then the car started to backfire and I got sick of it.

If you like the sound, do it. It doesn't matter what others think. If you like it, do it. You're the one driving it, not them.

Cheers,

Adam

Yeah its as simple as the coke can thing.

I got bored one day and did it. Bout 5 minutes work.

Got sick of the fully sic re VL turbo sound, not to mention the backfiring and the constant stalling. This would also lead to it running rich as f**k and burning way more fuel.

Ps. Don't do it

Hey,

Yeah, wouldnt blocking the bottom of it or whatever your saying stop it from releasing the pressure like it was designed to do and cause the turbo to backspin or something and therefore damage it???

IMO you should just do what SXY-33R said and buy at HKS atmo venting BOV...

bud, i wouldnt dream of doing it to my r34... just to many risks for a bit of fun...

lol well i cant talk because i too wanted to do it before i saw and heard a few dramas people were having when they thought how cool they were heheheeee

point is

now,

flutter = cool

later,

flutter = turbo bang!

cheers

flutter = 25 psi for 1 .a bit years then 20 psi for 1 year = still good, no shaft play. on vl turbo with highflow

usually u put the afm in the cooler pipes and put a metal intake on the front of the turbo for ultimate loudness. and put a pod on or not is up to u. il be doing it tomorrow on my 33 but leaving the afm normal position. u can hear the plastic and doesnt sound as good but my atmo blow off valve still goes off so its like half tutututu half blow off noise. it may go high pitch flutter even through the plastic pipes with the bov hole shut up

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • Back in January, I noticed my car felt noticeably weak. I had the injectors cleaned, which seemed to solve the problem -- until now. Recently, the car suddenly lost power again while driving. Suspecting the injectors, I brought it to the mechanic. He recommended replacing them entirely, saying the current ones were getting unreliable and fiddly to work with. I could not find a direct replacement for my current injectors. The closest match I found were 440cc injectors. This led me to look into the possibility of upgrading -- and of course, that would mean remapping the ECU. From my research I found: The OEM Part numbers are 16600-72L20 and 16600-72L21 Both the RB20DE and RB20DET use the same 270cc injectors. There are much better options out there over the old OEM injectors. Nistune could be a viable tuning option. While the RB20DE isn’t explicitly listed on their site, the ECU is essentially the same as the GTS-T version - just with a different map. The ECU code on mine is listed as supported. One concern is finding a tuner who works with Nistune. Aftermarket ECU like Haltech and Link, but this would be the most expensive choice (and possibly overkill for a mostly stock RB20DE) I admit that I am very new to the tuning scene and would appreciate any insight or recommendations regarding this.   These are some SAU links where I got some of my information from for reference: https://www.sau.com.au/forums/topic/380324-rb20de-injectors/ https://www.sau.com.au/forums/topic/477396-factory-270cc-injectors/  
    • The inspectors are not forensic by any means but if you forge your documents and/or badgings on vehicle parts and are found out, the consequences are just far bigger than if you just run illegal parts. And their job quite literally is to cross reference what parts you got installed and what your papers say you got. Something as silly as your suspension being 1mm too low will fail you. Nonetheless I asked if someone knew the damn pipe and I certainly did not ask for smartassery or underhanded comments, no idea why you need to be told this. Great way to waste both our time.
    • As useful as you explaining what forgery is... But then again, I wasn't aware your inspectors were also forensic experts and inspect nameplates on each component to confirm everything is original. They must inspect roughly 3 cars a year at that rate. You're right though, my comment doesn't help you in anyway, so I'll go talk to my wall now. Cheers. 
    • Say that to the guy that is going to fail your inspection or tow your car for illegal exhaust modifications. If you have anything else useful to say, please go tell your wall.
    • You must be fun at parties. 
×
×
  • Create New...