Jump to content
SAU Community

Recommended Posts

VICDRIFT is proud to announce these following drift days for 2007

Feb 3rd

March 17th

May 5th

June 23rd

July 29th

September 8th BATTLE(to be named) (Week before Sandown 500)

October 7th

December 15th

The club will be looking for a number of volunteer staff for these dates. If you would like to receive free spectator entry & lunch then please come to one of our club meetings.

For more information please visit http://www.vicdrift.com for updates and further events

Please note also General Meetings are held once a month on the First Thursday of the month first meeting being on the 1st of February at Ripe Bar. check website for further details.

--------------------

I heard that vic drift were going to be having days at calder sometime in the future. Is there any truth to that?

Next year maybe :)

We helped Calder get their wed nights back to their former glory with heaps of flow and passengers can now be taken(check rule and regs)

Calder also are running a beginers section like the fullock guys used to run. With Chris Dejager as Tutor to sit in with first timers.

sounds good! but is a bit expensive.. 90bucks for entry.. but i guess it worth it.. ill be there on the 27th at calder >_<

We run 20 cars for 20 minutes at Winton on the track. Most drivers get 4 or 5 laps in each session. A set of scrap tyres will only last 4 or 5 laps(unless you drive a sprinter! lol) so it works well you get sent in just when you run out of tyres! by the time you take a piss and change tyres its time to go back out again!

Calder is keen to support drift and is rumored to be holding a skid pan thing in the thunder dome(Pit lane) in the near future!

Yay masive figure 8's :laughing-smiley-014:

yeah my brother was at winton last time, he thought it worked perfect.. i will be there on sat!! but i will be starting on the beginners course to get the hang of things with my car, as i havnt driven it for months

  • 2 weeks later...

The beginer section has been shut down permenantly at winton due to track damage.

Calder drift nights still have beginers section and hopefully we at Vicdrft will have some Days at Deca just for beginers.

Beginers are still welcome at winton and will be given plenty of space between cars to make them feel comfortable.

you wouldnt be expecting much from beginners will you?

its bound to have some track damage because people are all over the place when you are beginning.. like i was

Yeah we know this. But unfortunately Winton can not afford to keep repairing the track after

each drift meet.

VicDrift will organize something new for beginers soon.

Come to calder if you can. Beginers section there is great.

  • 2 weeks later...

Calder is great if you have a roll cage cause you can take passengers and i hear soon they intend to concrete up to the wall "under the bridge" section which will make for some good spectating as drivers link the esse's to the last corner in one slide!

there was 64 cars at the last wed drift practice there, awsome turnout.

  • 4 weeks later...

ill be at the next calder on the 29th.. was a shame hitting that barrier but ill be out again before the 33 comes off the road to get another turbo setup...

love the track, very fast

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • Also had a look at the Nissan JP website looks like the 400r has a slightly shorter ratio than than the regular V37 3.133 VS 2.937 which from a guy who has driven both 3.69 vs 4.11 ratios in the S15 is bugger all. Seems that the AUTO Z runs the same ratio as the 400R but can't find any info as to if its an open or LSD? More often than not the auto LSD is open
    • Do not replace the power steering lines with this stuff. If it's anything like the Chase Bays stuff it will leak and be worse than stock. The reason why the reservoir is on the LH/passenger side of the car is because that's just where the reservoir was most convenient to fit. Don't overthink this stuff. The intake/cold side of the engine is pretty busy on these cars. And again, the hardpipe is designed to be a janky power steering cooler. In theory you can replace it with a real power steering cooler but that's really only for track use where boiling the fluid is a distinct possibility. Start with the low pressure lines feeding the pump from the reservoir. Make sure there isn't a bunch of junk in the reservoir filter. Be careful to not get ATF all over the engine bay. I hate dealing with ATF spills, you can clean it up and the slightest crevice will still release more oil that can still drip over time. You also want to inspect for leaks before you make a mess and can't tell what happened. Most likely you have a leak somewhere that is allowing fluid out and air in. Failing that it's allowing air in but not fluid out. Only place I can really see that happening is on the low pressure side because the pump will pull a slight vacuum to draw fluid in. Everything after the pump is high pressure or lower pressure, approaching atmospheric by the time it returns to the reservoir.
    • I did a skidpan night at SMSP this week, it was much cheaper than $350. But yeah, you need to slap an LSD in that thing.  I put an OS Giken in the 370Z and it's f**king MARVELOUS even compared to Nissan's viscous LSD. So you're saying it's free now that it's a housing estate? 😂
    • Nah, the car seems to run exactly as it did prior, in saying this it does "seem" to be better down low, like more eager to rev, but that may be 100% placebo effect from intake noise But, I'm not worried about it at all, in the end it is a fairly low compression NA engine that has a well shrouded intake,  if it is getting hotter IAT I cannot notice anything negative performance wise from the seat of my pants thrashing it about on the street or sitting in traffic, so meh, car now now makes induction noise so I'm happy
    • Do you have an IAT sensor? It's worth checking it to see. You may be suprised how little gap you actually need to flood your engine with hot air. (I tape up my airbox for a reason) :p
×
×
  • Create New...