Jump to content
SAU Community

Heathcote 1/6/2003 :P


Recommended Posts

Ok, I have read all of what you had to say, and ignoring the wanker contingent, I understand that some of you are pissed off - and possibly rightly so.

I have explained why things happened, so I won't re-itterate that here again.

We all do this because we want the best out of our cars. Some of you probably have no idea just what it takes to get a car, especially a 4WD car, to get into the 9's.

It is hard work - very hard - for all concerned. I admit, I was pissed off - if we had the track for ourselves, we would have had the driers out and stuff, but I made the call earlier (only later to realise that the rain was moving in again) but I stuck by my word and told the guys we would limit ourselves to a single run per hour - to give everyone else a chance.

I thought I was reasonable on this - maybe from someone else's perspective it doesn't seem that way. The point was I heard "some Skylines club" (that's all I was told, I didn't know it was SAU) was coming down, so I thought it would be slack of me to say no to them.

The big guy (Big Jim) was upset because someone earlier in the day had gone in, been all nice, asked to take photos, I said it was OK with me, as long as he didn't take photos of the drivers side of the engine bay. He said "no worries". He then proceeded, when we walked away, to stick his camera into the engine bay, under the plenum, to get a shot of the coolant lines... then ran off.

We chased and caught him - and I still have the pricks camera. He was lucky he was left intact. Big Jim, who took it hard that he had let the team down by allowing the guy through, was upset with himself and wouldn't let anyone else in. That is why many people were asked to leave - I have no idea who the guy was, but we couldn't risk someone else trying the same ploy.

Some of you don't realise just what it cost to get the development of the car to this stage - I don't ever talk about the money aspect of it, it is just what it costs - but I can tell you that its not just about money spent, it is more about how the cooling system itself caused so many problems (not just technical, some Japanese companies are still not talking to each other - there is much to the story of its development) - that I had to promise them that no one would ever be able to copy it.

Some people couldn't respect that - and as a result, we stopped anyone else from coming in.

So try to look at it from our point of view: We sat by and watched other people race, when we should have been running - but I said we would not run more than once an hour, and we stuck to that - even when we heard rain was coming, we still sat there.

So, I feel sorry for those people who feel hard done by - you probably had no idea of what was going on, but we had reasons for doing things the way that we did.

On the trip back we decided we will fabricate some form of carbon shield that covers the "no go" areas on the car, so we can leave it out for people to take whatever shots they want - but we didn't want to do this earlier as we never expected there to be other people there on either day.

I hope at least some of you can understand where we are coming from now.

That's all I'll say about this subject.

Mario.

  • Replies 162
  • Created
  • Last Reply

Top Posters In This Topic

I'll be the first ?

Thanks mario.

That's a lot better and gives us more of a background as to what was going on, and even though things maybe should have been different/nicer/whatever.

Both sides have now said their pieces and after that i think the issue should now be put down by all.

cheers boyz.

ash

im not gonna bother reading whats been said!

blahh silly males

bitch more than chicks

hehee

anyways mario.. saw ur car advertised as appearing in MAS

looking forard too seeing it there!!

u were invited to spend the day with paul walker crusin in the liners.. yeah?? im sure it was you that i as reading about in the magazine who was giving paul a few bits of info and tips.. :)

did u get his number by anychance!!!!!

lols :)

Originally posted by MzDfectd

im not gonna bother reading whats been said!

anyways mario.. saw ur car advertised as appearing in MAS  

looking forard too seeing it there!!

u were invited to spend the day with paul walker crusin in the liners..  yeah?? im sure it was you that i as reading about in the magazine who was giving paul a few bits of info and tips.. :)

did u get his number by anychance!!!!!

lols :)

Yes, the car will be at MAS.

I do have Paul Walker's phone number and his home address - I'm also going over there in 3 weeks. :(

Mario.

I have no interest in this guys car or what ever he decides to do with his money.......Also my veiw may not be important but here it is........Mr Mario If you wish to remain secretive about your car...Why have a site on which you spruke about your car,then dont let anyone have a look at the fkn thing?I am sure a lot of money has been invested into this car....its something that you dont see back home in aust but you can rest assured that youd be nothing out of the ordinary here....Although theres far more impressive cars here yours is quite unique in aust.Also good luck

acheiving whatever is your goal...but if you dont want the attention...you shouldnt have asked for it... i am sure theres 2 sides to the story and guys unless your in marios position you prob wont understand his side.........

man i didnt realise any of this happend... i dont blame u for being so protective of it mario i would be too!

wish i could have been there to see it run tho that would have been awesome. Look forward to seeing it at MAS and GOOD LUCK!

Originally posted by MzDfectd

errr i woke up looked out at the rain..

went back to bed

funniest thing is kylie calling me 8am saying she as chasing denham on the freeway but as orried to go closer cause his mrs might of been in the car

ahaha

and she actually was!

And there was all this talk that Denham was going to be the no-show....... :) :shake:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi again all, I’ve tried doing some searching on the topic but couldn’t find the answer I’m looking for.   I deleted my clutch booster because it had an air leak and was squealing like a hog, and now my clutch has very poor pedal feel and the friction zone is way too small, so I believe I need a bigger diameter clutch master cylinder to compensate for not using the booster. I found a Wilwood option that’s 3/4” for a good price and will fit my 3AN clutch line, but all the firewall adapters I see online such as RB factory or Chase Bays are listed as RWD only (GTST/GTS). Link below. https://rbfactory.shop/products/nissan-to-wilwood-girling-clutch-master-cylinder-adapter My question is if these adapters will also fit a GTR, and if anyone has experience using a 3/4” CMC without the booster, my clutch is a Nismo coppermix twin plate.   Thanks, always appreciate the advice!
    • Catching up on a post, I've replaced the external shark fin with a small 4g antenna (no further drilling, just a 1mm embiggening of the existing hole, and run that to where the dual battery models have the battery in the left rear guard.  No idea what the factory antenna did, but removing it had no impact on anything I use, according to the US manual the GPS antenna is in the dash and it still works fine Also ended up stealing battery power from one of the amps and ACC power from a unit nearby to add an ACC relay to power it. The mounted the booster, wifi, power socket and antenna splitter in the rear left guard out of the way, all out of site with the boot trims in
    • What drama? The only drama you're going to have is the near constant work to maintain all those sphericals. I only have sphericals in my front caster rods and front upper CAs (because both of these are near compulsory in an R32). I have had the front arms out of my car 34 times already this month, and if the new replacements arrive today, I will have them out and apart again tomorrow. Chasing clicking and clunking that comes from sphericals being a.....poor choice for a road car. Moisture and dirt are not their friends. I have been contemplating a change to my rear subframe that would require me to use sphericals in my lower CAs. And.....I don't want to have them that close to the road.
    • Did you need anything else you've already done? If you had it before... and liked the changes after, then supposedly it'd be more of the same. The idea about most suspension arms is to tune geometry that the OEM arms max out at/can't handle because they weren't designed to have the car setup in such a way that 'looks good'.
    • I have replaced everything on my r34 including suspension to Miester R, all rear subframe bushes to poly, all arms to metal adjustable and same in front.   only thing I haven't touched is the front lower control arm. Should I? what improvement can i expect ? I mean the one on the link below?   Car drives perfectly, it is just me thinking everything is either puly bush or hard bearing type so should also do lower control arm front but do I really need it ? https://www.japspeed.co.uk/product/suspension/adjustable-arms/nissan-200sx-s13-s14-s15-skyline-r32-r33-r34-adjustable-suspension-front-lower-control-arms/?gad_source=1&gclid=Cj0KCQiAo5u6BhDJARIsAAVoDWs5V_PauQPf0kx3zFCaA4tOC9Q7JSIsfJWma_jAPN2f1sJA686djOwaAidgEALw_wcB
×
×
  • Create New...