Jump to content
SAU Community

Big Battery Problems, Drawing Power With Key Off?

O.I.C Napster

By O.I.C Napster,
in General Maintenance

 Share

Recommended Posts

O.I.C Napster Collaborator

O.I.C Napster

Posted
Posted (edited)

Hi all

Woke up this mornin, jumped in the car for work and turned the key and... nothing. Only just did the gauge lights work.

Car hasnt been started for two days, got the thing to work and come home time turned the key and nothing again. Its only just done this in the last two days. Never had a problem before this.

All i d did was went into the boot to change my flat tyre.

Its a brand new battery 2 weeks ago... and i took it to the auto electrican dude and he said it could be a number of things. I did what he said like take out fuse untill the readings drop. But geezz i cant seem to find any power draw from anything.

I havent installed anything for ages that could be drawing power with the car turned off. so its getting it from somewhere...

Anyone else had this problem??? how did you overcome it???

Im going nuts here... I dont wanna call out RACQ 3 time in two days lol

Let me know

CHeers Matt

Edited by O.I.C Napster
Fry_33 Proficient

Fry_33

Posted
Posted

Sounds like the auto elec's suggestion would be the same as mine.. just to be sure it's the same I'll describe the method I'd use.

DON'T START THE CAR WHEN DOING THIS..

Would help if you had 2 people..

Turn multimeter to the amp reading setting.

Undo the negative battery terminal and touch the positive wire from a multimeter to the battery post.

Connect the negative wire from the multimeter to the negative clamp. (This will complete the circuit, needed to measure current)

Get one person to watch the current draw. Normally it should be very small but in your case it would probably be a higher reading.

Get the other person to start taking out fuses one at a time, replacing as you go.

The person watching the multimeter amp reading will say when the reading drops. Whatever fuse is out when it drops is the circuit you have a problem with.

Someone will probably have a better idea but that's what I'd try.

Good Luck,

blind_elk Grand Master

blind_elk

Posted
Posted

You can do all the current testing on the POSITIVE side. EVERYTHING needs to be off, doors closed. If you observe a significant current draw, reconnect the battery clamp, and then do the same with each fuse to determine which circuit is drawing the current.

But firstly, it could have been something simple like the boot light was on (don't ask why, but it can happen) after mucking around with the spare.

TokyoTaxi Veteran

TokyoTaxi

Posted
Posted

If you have an alarm or immobiliser, it could be stuffed.

I had a 3 point immobiliser fitted to my 32. The battery would run flat within 3 days if the car wasn't driven. After a while the car just died. Got the auto elec to fix it and then it died again and then one more time. Got him to pull the 3 point out and install a different one and problem solved.

Gazee Grand Master

Gazee

Posted
Posted

my friend had the same problem after an alarm install, they thaught it was the alarm but alarms don't draw enough power to drain a battery unless you have more in depth problems, or a shit alarm...

but his problem was his battery terminals, they were pretty screwed so have a look at them and give them a clean but its just a suggestion..

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Latest Posts

    • TurboTapin
      Speedtek 800hp Close Ratio Gearset

      By TurboTapin · Posted

      Speedtek and manufacturing/QC issues go hand in hand. 
    • CRSKmD
      R32 Sedan - Grip and Drift (have my cake and eat it too build)

      By CRSKmD · Posted

      Unfortunately there is no way to properly access the baffles. It’s a welded unit and the inlets and drain are too small to jam anything down realistically. Same with the breather I took off the cover and foam and it’s basically a wall
    • MBS206
      Mistakes were made, my R34 Story

      By MBS206 · Posted

      I just want to double check this.... When you measured PTV, you measured it with the new roller rockers installed too yes?   I kind of read the above as "we did PTV, then moved on to roller rockers..." I'm sure all is fine, but my brain is tweaking...
    • MBS206
      R32 Sedan - Grip and Drift (have my cake and eat it too build)

      By MBS206 · Posted

      Shove more foam in it as a minimum if you possibly can. Or steel wool (not the stuff with soap on it!) Baffles / getting the oil out of the air is huge, and should be done at both the cam cover, and the catch can.   I'm about to do a power steering reservoir, and even that needs some thought to make sure air is separated from the oil, to stop evil Cavitation. I'll probably look at doing my own catchcan later on too.
    • The Bogan
      Getting lug nuts "gutentight" with no torque wrench

      By The Bogan · Posted

      I was once told, who it was I'm to old to remember, that the length of the OEM wheels brace supplied with a vehicle is designed long enough for a average person to apply enough torque to do up, and undo the wheel nuts to the specified torque  What a average person is is anyone's guess though, i.e. average fat bastard, average knuckle head, average perfect sized human......like me Unless of course, a tyre shop has ugga dugga'd them up to "torque to yeild/strip" specs, used cross threading as natures lock tight, or a big breaker bar was used to tighten them up to get some nice stretch in the poor old wheel studs Me, I torque wheel nuts to 1 elbow joint click, lower torque settings are based of wrist clicks, higher torque settings are based of shoulder clunks, or total dislocation for anything that requires all of the torques 
×
×
  • Create New...