Jump to content
SAU Community

Recommended Posts

Guys and Gals,

The time has come to let my baby go. I am the second Australian owner and have owned her for a year. The car has been extremely well look after (you will know what I mean when you see the car personally) and serviced regularly every 3000 kms with Fully Synthetics Oil (PENNZOIL). Never miss a beat since I owned it. Always garaged and only get driven during weekends (Only traveled less than 5000kms since I have owned this car) due to my busy daily life. Very regretful sale as I am thinking of upgrading to another car and she has to go.

The car was completely stock standard when I first got it last year. The spark plugs were immediately replaced with NGK IRIDUIM spark plugs and Gear box oil has been changed with REDLINE, and serviced. Since then, the list below can describe what I have done to her.

It has 80,XXX kms at the clock and comes with new Battery

Modifications:

The modifications were performed with GENUINE PARTS ONLY, purchased BRAND NEW and fitted PROFESSIONALLY. All receipts are available. The car only traveled for 1500 kms since all the below modifications were fitted.

BOMEX FRONT BAR

BOMEX REAR BAR

BOMEX SIDE SKIRTS

EYELIDS

HKS DUMP PIPE (Stainless Steel)

HKS FRONT PIPE (Stainless Steel)

HKS HI POWER SILENT (Stainless Steel) – Sounds awesome with great power output

METAL CAT (Stainless Steel)

HKS HIPERMAX II FULLY ADJUSTABLE SUSPENSION

CUSTOM MADE LEATHERETTE VINYL SEAT TO FIT R34 GT-T COUPE WITH DOUBLE STITCHING

AUTOWATCH ALARM WITH BUILT IN TURBO TIMER

ALPINE DECK

ALPINE SPEAKERS and TWEETERS

NGK IRIDIUM SPARKIES

K&N POD FILTER

GENUINE FLOOR MAT

NISMO CLEAR SIDE INDICATORS

FACTORY OPTIONS:

ELECTRIC SUNROOF

RARE SIDE-AIRBAGS

TINT

The engine is completely stock (Untouched), never been boosted, thrashed and whatsoever. Never been in track, circuit or dragged.

Thats all I can remember now and I am sure I have missed out some bits here and there. So please shoot me pm or give me a buzz at 0411 332 447 If you are genuinely interested or you know anyone who is genuinely interested.

ASKING PRICE: SOLD

STRICTLY NO TEST DRIVE / TEST PILOT / TIME WASTER / DREAMER PLEASE!

P.S. I am not in a hurry to sell this car because if I find no interest here, I will just keep her

Cheers,

post-27713-1181645528_thumb.jpg

post-27713-1181645548_thumb.jpg

post-27713-1181645588_thumb.jpg

post-27713-1181645639_thumb.jpg

Edited by R33GTSTSII
one of the nicest r34 ive seen

good luck with the sale mate, wish i was back in perth , wud snap it up st away

Thanks mate.

You got to see the car to appreciate it

I had a few guys come and inspect the car....it has failed noone and all of them vouch that this car is the nicest and cleanest skyline they have ever seen...

It is ashame that none of them get their finance approved

if you are looking for a quality car...without compromise...then this is the one for you...

Edited by R33GTSTSII
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • My take on gg2 48mm, 54mm, 58mm, and 62mm compressor map for same size compressor vs gg1 : All gg2 only outflow gg1 above 20 psi. As all g gen 2 surge line at lower left of comp map move to the right, all gg2 sacrifice spool vs same size gg1, surge line move to the right worst for 54mm gg2. So for same size compressor if you want best response, use gg1, if you want max hp at >20psi use gg2 but you will be laggier vs same size gg1. Max compressor efficiency drops to max 75% on all gg2 vs max 76%-80% of same size gg1. Iirc lower efficiency means hotter iat less dense air so lower hp at same operating point of comp map. Also curious why gg2 is mapped to lower max rpm vs same size gg1 (only 48mm size both gg1 gg2 mapped to same rpm) : 54mm gg1 165,000 rpm  vs  gg2 160,000 rpm. 58mm gg1 150,000 rpm vs gg2 140,000rpm. 62mm gg1 145,000 rpm vs gg2 140,000 rpm. If gg2 can safely spin to gg1 rpm then they can flow a bit more than as mapped. Good thing that all gg 2 interchange compressor and turbine housings with same size gg 1. So gg1 owners can buy gg2 chra only if planning to boost >20psi.
    • My stuff is all with Shannon's, granted, I don't really have imports I'm driving on the road, however, I've had multiple cars at the same time with them. Presently we have the Landcruiser on laid up cover, Sarah's Kluger on full cover, and the house insured. About 18 months ago Sarah wrote her Subaru Liberty GTB off, insured with Shannon's, and the payout, and buy back of the wreck was super quick. In 2020 we had the VF Commodore totalled in a major hailstorm. Storm was on the Saturday, I called on the Sunday and lodged it, vehicle was towed on Tuesday night, assessment team called on Wednesday to say it was a total loss and get payout details, money was in the bank on Thursday morning. Have had a few other claims both at fault, and not at fault, over the years, and never had an issue with them.   Funnily enough, they're also the cheapest insurer I find for things like Sarah's Kluger.   I will say I'm less impressed dealing with them lately around "the experience", as a lot of their staff that you deal with aren't car enthusiasts. Shannon's has a much more main stream feel ever since they decided to become "big corporate", laid a heap of staff off, and then hired a bunch of non enthusiasts. At the same time they've been making a push to be less "call us and we'll personally have someone who cares help" to "hey, this computer can do stuff for you" and are trying to get more square pegs to fit round holes. (That's just the vibe I get from them). Again, have had no issues with claims with them, but get a bit of a "less personal" feel from them.
    • A thing I wasn’t happy with with enthusiast was during the initial phone call they told me they’d insure it for 130k but needed photos.   I then sent them photos and they told me $80k as there were other cars either similar modifications available for around that price, I told them to send me the links to said cars so that I can buy them. i then sent the modification list with prices of the parts (no labor) and the price then came to 115k, which is still shy of the 130 that was agreed in the initial phone call 
    • Ask me a bit later this week before payday
    • I agree that delayed payment probably isn't the most suitable solution. It seems a solid complete transaction would be best. As I wouldn't be using this sale as a line of credit that would typically earn interest, we can probably arrange a much cleaner single transaction deal. I can do $92.52 today. Would you prefer EFT, or Cash on Pickup?  😛
×
×
  • Create New...