Jump to content
SAU Community

Recommended Posts

Hi,

About 2 weeks back i purchased a original style Apexi RSM. I was brand new when I received it and I paid $118 delivered to my door.

Just yesterday I purchased a safc and blue screen rsm as a package so now I have the old rsm (which is basically brand new for sale.

I would like close to what i paid for it as I only used the thing for 2 weeks

$100 ONO delivered \local meet up if in brisbane

Does 1/4 mile times 0-100 etc

Has tyre size correction..

All the basic RSM features..

See manual here http://www.apexi-usa.com/pdfInstallation/14.pdf

Can supply pics if neccessary.......

Please note, sub loom (small loom on the right first pic) has been hacked at when I removed from my car last night (actually i used this to wire in my new rsm so I got away without going back to the ecu as they use the same wiring) everything else is perfect.. Just cut the plug off and extend the wiring..

Also will throw in an apexi rsm\safc stand for free.. 2nd hand just gotta clean the old double sided tape off and apply new stuff.

post-33138-1181723044_thumb.jpg

post-33138-1181723058_thumb.jpg

post-33138-1181723071_thumb.jpg

post-33138-1181723086_thumb.jpg

Edited by turbs33
Link to comment
https://www.sau.com.au/forums/topic/172580-apexi-rev-speed-metre-original/
Share on other sites



  • Similar Content

  • Latest Posts

    • Also had a look at the Nissan JP website looks like the 400r has a slightly shorter ratio than than the regular V37 3.133 VS 2.937 which from a guy who has driven both 3.69 vs 4.11 ratios in the S15 is bugger all. Seems that the AUTO Z runs the same ratio as the 400R but can't find any info as to if its an open or LSD? More often than not the auto LSD is open
    • Do not replace the power steering lines with this stuff. If it's anything like the Chase Bays stuff it will leak and be worse than stock. The reason why the reservoir is on the LH/passenger side of the car is because that's just where the reservoir was most convenient to fit. Don't overthink this stuff. The intake/cold side of the engine is pretty busy on these cars. And again, the hardpipe is designed to be a janky power steering cooler. In theory you can replace it with a real power steering cooler but that's really only for track use where boiling the fluid is a distinct possibility. Start with the low pressure lines feeding the pump from the reservoir. Make sure there isn't a bunch of junk in the reservoir filter. Be careful to not get ATF all over the engine bay. I hate dealing with ATF spills, you can clean it up and the slightest crevice will still release more oil that can still drip over time. You also want to inspect for leaks before you make a mess and can't tell what happened. Most likely you have a leak somewhere that is allowing fluid out and air in. Failing that it's allowing air in but not fluid out. Only place I can really see that happening is on the low pressure side because the pump will pull a slight vacuum to draw fluid in. Everything after the pump is high pressure or lower pressure, approaching atmospheric by the time it returns to the reservoir.
    • I did a skidpan night at SMSP this week, it was much cheaper than $350. But yeah, you need to slap an LSD in that thing.  I put an OS Giken in the 370Z and it's f**king MARVELOUS even compared to Nissan's viscous LSD. So you're saying it's free now that it's a housing estate? 😂
    • Nah, the car seems to run exactly as it did prior, in saying this it does "seem" to be better down low, like more eager to rev, but that may be 100% placebo effect from intake noise But, I'm not worried about it at all, in the end it is a fairly low compression NA engine that has a well shrouded intake,  if it is getting hotter IAT I cannot notice anything negative performance wise from the seat of my pants thrashing it about on the street or sitting in traffic, so meh, car now now makes induction noise so I'm happy
    • Do you have an IAT sensor? It's worth checking it to see. You may be suprised how little gap you actually need to flood your engine with hot air. (I tape up my airbox for a reason) :p
×
×
  • Create New...