Nissan Genuine Part Numbers

[SkyKC]

ahh well at least its in a nissan box not an ntk one. how much did they rape you for that?

there are aftermarket ones with the correct plugs that are direct plug in replacements.

its say NGK on the actual sensor...........got it for $168 something with GST, I asked here several times if those NTK or Falcon ones gona be ok for my GTS4 non-turbo, the answer was yes, when i calld NGK directly about this, they advised me it wont be 100% accurate so asked to get original one was paranoid about getting NTK after that

well I think I should have gone for NTK one tho (like$70 i think),,, oooh well

Note- got a OEM oil filter from NIssan while I was there, well they are not really genuine I guess, its made in Thailand.............I love stuff from Japan

[SkyKC]

NIssan OEM oil filter for R33 RB25 - $13 something

Note - Its made in Thailand

[neofenrir34]

Hey all. Just wondering if there is a part number for the tacho modual in a R33gtst series 1 1995 dash cluster. I want to replace the tacho unit in my cluster. Trying to work out if cheaper to buy new modual part (which i doubt), or just buy a second hand cluster n mix n match parts?

Can you attually just buy the tacho gauge?

part No# 24825 21u01. tacho meter only

[babyskyline]

hey guys. Need help with part numbers.

I have checked everywhere in nissan fast i can think of and havent had any luck.

Its the metal thing covered in plastic that goes on the doors just below where the window starts (see picture....the thing circled in yellow)

For 1990 r32 gtst

vin HCR32064384

Need the part number for each side.

cheers guys

[Duncan]

looks like 80820-04U00(RH) and 80821-04U00 (LH) "moulding assy front door outside"

there is another part 80834-04U00 (RH) and 80835-04U00 (LH) "weatherstrip-front door inside". I think that is between the trim and the window though.

[babyskyline]

looks like 80820-04U00(RH) and 80821-04U00 (LH) "moulding assy front door outside"

there is another part 80834-04U00 (RH) and 80835-04U00 (LH) "weatherstrip-front door inside". I think that is between the trim and the window though.

Looks like 80820-04U00(RH) and 80821-04U00 (LH) "moulding assy front door outside"

Thats the one. Awesome work Duncan....cant believe i missed it

[mr.vvl]

R34 GTR VSPEC II

Need part numbers for

Coolant temperature sensor

Complete engine wiring harness

[arep3]

Whats your vin number?

[hotchoc]

Need parts numebr for

R34 Bayside Blue Eyelids

Cheers

[Duncan]

pretty sure they are not a nissan part but aftermarket (or maybe nismo?)

[hotchoc]

ya reckon ?

If that's the case how do u get this nismo eyelids then ?

[arep3]

it would be easier and cheaper to get after market 1s. google r34 eyelids or use the search button at the top here.

[unique1]

i know this will be hard to find i would imagine but im after the part no. for a brake master cylinder from a wgnc34 autech 260rs stagea series 1 if possible (i think s1, and s2 is the same)?

i have 34 brembos on the stagea and need a brake booster to suit but i found out 33gtr and 34gtr use different masters i cant see why if they are the same brakes? hopefully the autech one will be the correct one.

thanks

[arep3]

If you have the r34 brembos fitted, wouldnt you be able to use the r34 brake master cylinder? im havin a little difficulty with fast so i cant check right now but im workin on it now. somebody else out there with fast might be able to post up the number before i get around to it.

[hotchoc]

"it would be easier and cheaper to get after market 1s. google r34 eyelids or use the search button at the top here."

tried the search and majority of em are DIY or from carmate. AFAIK, aftermarket ones are approx 120ish after paiting whereas the nismo ones are around150++. Would rather get nismo in this case

Do you know where can we get nismo eyelids?

[unique1]

If you have the r34 brembos fitted, wouldnt you be able to use the r34 brake master cylinder? im havin a little difficulty with fast so i cant check right now but im workin on it now. somebody else out there with fast might be able to post up the number before i get around to it.

thanks mate, i am just wanting to make sure the brake lines all line up with the 34 master thats all, its rather expensive to get it wrong ($300 or so), i cant see why the 34 and 33 would be different?

[arep3]

"it would be easier and cheaper to get after market 1s. google r34 eyelids or use the search button at the top here."

tried the search and majority of em are DIY or from carmate. AFAIK, aftermarket ones are approx 120ish after paiting whereas the nismo ones are around150++. Would rather get nismo in this case

Do you know where can we get nismo eyelids?

When i can get fast working ill have a look for a part number. not promising that it will be there though. you could try calling a Nissan dealership and speaking with spare parts. They may be able to help you. If not, try searching yahoo japan auctions. there is several ways to buy from there including Slidewize performance I bought from Zac a few times. always delivered what ive bought. Theres other companies out there that can buy from the auctions on your behalf.

[arep3]

thanks mate, i am just wanting to make sure the brake lines all line up with the 34 master thats all, its rather expensive to get it wrong ($300 or so), i cant see why the 34 and 33 would be different?

Yea expenses suck. There could be numerous master cylinders that will line up. Maybe best speaking with a mechanic. You might be able to find a cheaper alternative to the R34 1. Ill try to find the number when fast is working.

[arep3]

i know this will be hard to find i would imagine but im after the part no. for a brake master cylinder from a wgnc34 autech 260rs stagea series 1 if possible (i think s1, and s2 is the same)?

i have 34 brembos on the stagea and need a brake booster to suit but i found out 33gtr and 34gtr use different masters i cant see why if they are the same brakes? hopefully the autech one will be the correct one.

thanks

Sorry for the inconvenience but its been ages since ive used fast and i have actually never looked for stageas before. can you make it easier and supply me with a vin number? that saves me a lot of stuffing around

[arep3]

When i can get fast working ill have a look for a part number. not promising that it will be there though. you could try calling a Nissan dealership and speaking with spare parts. They may be able to help you. If not, try searching yahoo japan auctions. there is several ways to buy from there including Slidewize performance I bought from Zac a few times. always delivered what ive bought. Theres other companies out there that can buy from the auctions on your behalf.

ive had a look but i haven't been able to find it. maybe someone else that has fast would be able to track it down.