Jump to content
SAU Community

Recommended Posts

Hi guys,

can I please have a list of all the ecu numbers for R32 GTR and R33 GTR???

Why? I want replace my O2 sensors and need to be sure which ecu I'm running, it had the later R33 type crank when the oil pump let go.

The numbers on mine is partially rubbed off, I can see

a Large 30

23710 0??02

MEC R128

0621

Thanks guys, your work is most appreciated.

Thanks Lippo, so theres no chance it could be an R33 ECU?

These are the only part numbers listed for an r33 gtr ecu

Whilst the first numbers are the same the second lot on an r33 start with a 2 and end with a 0 or 1

post-27276-1230463160_thumb.jpg

Edited by W0rp3D

don't worry the 33 and 32 gtr ECUs are interchangeable anyway.

more important is the 02 sensor size, the 32 uses the smaller thread and the 33 the larger thread. You need to check that first, it normally depends on what dump pipes you have on the car (most aftermarket ones use r33 style)

And if you have a look at your part number your ecu is for a carbie fed rb26 lol, im assuming its a typo.

post-27276-1230463692_thumb.jpg

But atleast yours is an rb and not a br :blush:

Edited by W0rp3D

Duncan, whilst they do plug in, I'm fairly certain the R33 & R32 GTR o2 sensors work differently. The power fc needs to know which type you are using.

I stupidly remembered that my ECU must be an R32 as it has a chip in it, so definately a R32.

Thanks guys.

Was wondering, im trying to find out what models use the same coil packs and igniter module as mine, here is the result after loading in my vin for the igniter:

post-27276-1230376566_thumb.jpg

Does it mean that every part number listed there will work on my car?

here

post-19275-1230540798_thumb.jpg

actually I'm not sure if thats the right part no you are after, but just go into parts master and you can see where the same part has been used on other models (as above)

Cheers,

Kaz

lol

you need logic to figure it out, you boys have got no hope haha :D

Please send a cheque for $50 and I'll get back to you..

I found it in the start menu just after i posted it :D

here

post-19275-1230540798_thumb.jpg

actually I'm not sure if thats the right part no you are after, but just go into parts master and you can see where the same part has been used on other models (as above)

Cheers,

Kaz

i was wondering how many pages that would go on for before some one mentioned using the master book method. if u want to get real tricky u can also check it again Australian models if u have the AUS part of Fast loaded as well, all you need to do is open up the AUS version of fast then go into the Master book it will load with AUS info. not saying there will be any matches but it's just a thought

hey buddy after gaskets for a r32 gtst 93

rocket cover

water pump

or even a vrs kit would u know how much they normally cost? know its a low ball but worth the ask

cheers

can't help with price's but Part No. as follows

Rocker cover 13270-58S01 and 13270-58S11 LH and RH

water pump is a liquid gasket (something like ultra grey or a three bond, three bond is genuine Nissan Part No. KP710-00150)

VRS 11042-72L26

any chance of getting part numbers for 1998 R34 GTT (ER34) for the centre console .. namely the double din stereo surround (fascia), the aircon surround (fascia) and the 2 brackets that hold the aircon/stereo in the centre console thanks

also does anyone know how long nissan usually need to get these parts from japan ??

Edited by Delta Force
  • 2 weeks later...
any chance of getting part numbers for 1998 R34 GTT (ER34) for the centre console .. namely the double din stereo surround (fascia), the aircon surround (fascia) and the 2 brackets that hold the aircon/stereo in the centre console thanks

also does anyone know how long nissan usually need to get these parts from japan ??

Facia for CD player 68260-AA005

there are 2 types of brkts but i don't read japanese so cant tell which is which part No. as follows

28039-AA000 LH

28039-AA010 LH

28038-AA000 RH

28038-AA010 RH

two types for ac Fascia aswell ( think it may be a differance in the finish)

AC unit Fascia 27570-AA000

27570-AA010

Lippo is right normaly takes about 2 weeks, just depends the the stock situation in japan

Edited by neofenrir34

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi all, Restoring r33 series 1 rb25det. All the heater hoses were on their way out, have replaced them and put it all back together. After testing I noticed a small leak from behind the head on the actual metal water line to the turbo when cars warm. I tried running a longer hose over it but it kept leaking...   I am about to take the (stock) manifold off again😔 to change the water line does any one have any lines they recommend? I was looking at Aeroflow Turbo Oil & Water Line Set but not sure what everyone else recommends. Car is completely stock but want to upgrade turbo eventually. it looks like ill have to disconnect a lot just to replace these lines so if there's anything else recommended to do please let me know. Thank you in advance!
    • From memory, on the R33 GTSt at least, while everyone says "It's not adjustable", I found when I changed clutches in mine, it just needed a small adjustment on the rod length. But be very wary here, as you could end up trying to push the pushrod in the master too far, or blowing out the slave.   Most likely though, if the master/slave isn't bypassing internally or leaking out, then the throw out is the wrong height compared to the fingers on the clutch, so when it moves to disengage the clutch, it isn't 100% disengaged. You can check part of this out too by jacking the car up, having the engine running, put your foot on the clutch and try to engage 1st gear. If it goes in pretty easy (Compared to the ground) and/or the wheels start turning a fair bit and it takes a bit too much brake pedal to bring them back to a stop, this is likely the issue.  I'm not sure if you can adjust the height of the forks etc in these though, it's been that long since I've touched any RB gearbox.
    • That's all good, I thought I was missing some interesting feature! Maybe @PranK can double check if that is something that is meant to be operating or not.
    • I hope that is not something that bad. From what i remember he said that only first gear is "hard" to get in and that he has couple of ideas what to try next but idk 😕  hope it is not gearbox out. I will let you know.
    • If it's not the hydraulics, it is probably gearbox back out. Usually as per @Duncan's post, or otherwise associated with not getting the throwout fork positioned correctly. All the way up to catastrophically bolting shit back together without it being aligned properly and wrecking the clutch/input shaft/flywheel/something else.
×
×
  • Create New...