hobbsy Posted June 16, 2007 Share Posted June 16, 2007 hi guys, I just bought a R32 GTS4, its got a pod filter so I want to box it up. does anyone have some examples of designs they could show me? especially for intake.. i don't really want to cut any holes in my chassis/wheel arch if i can avoid it. the cars at the mechanics at the moment so I can't measure it up, but i was just planning to do a 4 sided box sitting against the chassis with a 3 inch hole in the front to run a piece of pvc pipe or some form of tubing out to the front bar. where do people usually get the air from? does anyone have pictures of the stock airbox so i can see where it gets air from? I work at a fabrication shop so i probably have access to anything i would need. Link to comment https://www.sau.com.au/forums/topic/172970-help-fabbing-airbox-for-r32-rb20det/ Share on other sites More sharing options...
grandmasterb Posted June 17, 2007 Share Posted June 17, 2007 hi guys, I just bought a R32 GTS4, its got a pod filter so I want to box it up.does anyone have some examples of designs they could show me? especially for intake.. i don't really want to cut any holes in my chassis/wheel arch if i can avoid it. the cars at the mechanics at the moment so I can't measure it up, but i was just planning to do a 4 sided box sitting against the chassis with a 3 inch hole in the front to run a piece of pvc pipe or some form of tubing out to the front bar. where do people usually get the air from? does anyone have pictures of the stock airbox so i can see where it gets air from? I work at a fabrication shop so i probably have access to anything i would need. Im in the process of knocking one up for mine at the moment, should have it finished next weekend so i will post up some pics and what i used Link to comment https://www.sau.com.au/forums/topic/172970-help-fabbing-airbox-for-r32-rb20det/#findComment-3183981 Share on other sites More sharing options...
B0oStEr Posted June 17, 2007 Share Posted June 17, 2007 Im in the process of knocking one up for mine at the moment, should have it finished next weekend so i will post up some pics and what i used If you don't want to cut any holes you will probably need to use the stock hole under the headlight. You can get an r32gtr or r32rb25 intake snorkel, which uses the all of the stock hole unlike the factory rb20 snorkel. Also you can take the nose, that the snorkel fits onto, off your factory airbox as it is made of metal and rivet it to the front of your new airbox in a position that aligns with the factory snorkel. It's up to you if you want to use the gtr/rb25 intake piping that attaches in front of the snorkel. I've thought about using the gtr/rb25 intake section that bolts to the front bar reo and blocking off the intake hole and then plumbing an air scoop into the fitting that used to go to the gtr/rb25 resonator chamber. The thing I wasn't sure about was whether the resonator duct was big enough. Link to comment https://www.sau.com.au/forums/topic/172970-help-fabbing-airbox-for-r32-rb20det/#findComment-3184402 Share on other sites More sharing options...
hobbsy Posted June 18, 2007 Author Share Posted June 18, 2007 i'll probably just run some of that cylindrical plastic air ducting stuff from a hole in the airbox to the factory hole with a heatshield along the side of it, or something like that. Link to comment https://www.sau.com.au/forums/topic/172970-help-fabbing-airbox-for-r32-rb20det/#findComment-3185666 Share on other sites More sharing options...
grandmasterb Posted June 21, 2007 Share Posted June 21, 2007 If you don't want to cut any holes you will probably need to use the stock hole under the headlight.You can get an r32gtr or r32rb25 intake snorkel, which uses the all of the stock hole unlike the factory rb20 snorkel. Also you can take the nose, that the snorkel fits onto, off your factory airbox as it is made of metal and rivet it to the front of your new airbox in a position that aligns with the factory snorkel. It's up to you if you want to use the gtr/rb25 intake piping that attaches in front of the snorkel. I've thought about using the gtr/rb25 intake section that bolts to the front bar reo and blocking off the intake hole and then plumbing an air scoop into the fitting that used to go to the gtr/rb25 resonator chamber. The thing I wasn't sure about was whether the resonator duct was big enough. Yeah pretty much what i had in mind myself, engine going back in this weekend so hopefully finish off the box while im at it Link to comment https://www.sau.com.au/forums/topic/172970-help-fabbing-airbox-for-r32-rb20det/#findComment-3192228 Share on other sites More sharing options...
Craved Posted October 10, 2007 Share Posted October 10, 2007 GMB ... ever finish your Airbox? Link to comment https://www.sau.com.au/forums/topic/172970-help-fabbing-airbox-for-r32-rb20det/#findComment-3402910 Share on other sites More sharing options...
dmr Posted October 10, 2007 Share Posted October 10, 2007 where do people usually get the air from? does anyone have pictures of the stock airbox so i can see where it gets air from?I work at a fabrication shop so i probably have access to anything i would need. here's an example of my crappy diy for the time being. need a nice 3" pvc pipe but got this one for free, so cant complain. Link to comment https://www.sau.com.au/forums/topic/172970-help-fabbing-airbox-for-r32-rb20det/#findComment-3402950 Share on other sites More sharing options...
Craved Posted October 10, 2007 Share Posted October 10, 2007 DMR - that is actually a clever way to do it, looks std shame this type of option is alot hardcer for the 33 guys out there Link to comment https://www.sau.com.au/forums/topic/172970-help-fabbing-airbox-for-r32-rb20det/#findComment-3403252 Share on other sites More sharing options...
funkymonkey Posted October 10, 2007 Share Posted October 10, 2007 in the process of fibreglassing one for mine. I've got a plug, now I just need to make a mould and then lay up some fibreglass on it. Will post a DIY with pics when I'm done. Link to comment https://www.sau.com.au/forums/topic/172970-help-fabbing-airbox-for-r32-rb20det/#findComment-3403280 Share on other sites More sharing options...
GTST98 Posted October 10, 2007 Share Posted October 10, 2007 hey this is my airbox shitty pics i know , its all outta brushed stainless . its great stuff! Link to comment https://www.sau.com.au/forums/topic/172970-help-fabbing-airbox-for-r32-rb20det/#findComment-3403612 Share on other sites More sharing options...
GTST98 Posted October 10, 2007 Share Posted October 10, 2007 oh and ive got a front mount so there is one spare hole where the pipe work normally returns to the engine so i used this as my air feed from down next to the bliker in the front bar , ive used that flexible tube from super shit AKA super cheap , the stuff the streaches then stays where u leave it , its great stuff Link to comment https://www.sau.com.au/forums/topic/172970-help-fabbing-airbox-for-r32-rb20det/#findComment-3403622 Share on other sites More sharing options...
ACTIV32 Posted October 10, 2007 Share Posted October 10, 2007 (edited) i made one those covers but came to the conclusion to put my pod outside the car i relised that it sucked way more cooler air just thought u like to know i also have 32 gts4 Edited October 10, 2007 by ACTIV32 Link to comment https://www.sau.com.au/forums/topic/172970-help-fabbing-airbox-for-r32-rb20det/#findComment-3403743 Share on other sites More sharing options...
tom32 Posted October 11, 2007 Share Posted October 11, 2007 (edited) hi first time to poast i own a r32 gtst Edited October 11, 2007 by tom32 Link to comment https://www.sau.com.au/forums/topic/172970-help-fabbing-airbox-for-r32-rb20det/#findComment-3405703 Share on other sites More sharing options...
tom32 Posted October 11, 2007 Share Posted October 11, 2007 (edited) hi i own a r32 and i made an air box out of polycarbonte (lexan) which is clear so you are abl to see you pod filter Edited October 11, 2007 by tom32 Link to comment https://www.sau.com.au/forums/topic/172970-help-fabbing-airbox-for-r32-rb20det/#findComment-3405710 Share on other sites More sharing options...
lteh Posted October 11, 2007 Share Posted October 11, 2007 is an aftermarket airbox defectable?? Link to comment https://www.sau.com.au/forums/topic/172970-help-fabbing-airbox-for-r32-rb20det/#findComment-3405720 Share on other sites More sharing options...
TurboX Posted October 11, 2007 Share Posted October 11, 2007 I think the std airbox with K&N and the triangular metal entry pipe beaten out to cylindrical, inside a five inch plastic duct molded to fit into the entrance along side the headlight is the ultimate. In the pic above ( post #7) you can see the two rectangular holes near the headlight, - cut the middle bit of metal out making it one HUGE opening for the intake plastic duct molded to the same shape and protruding out a bit and wrapping round to make a smooth air path!! Link to comment https://www.sau.com.au/forums/topic/172970-help-fabbing-airbox-for-r32-rb20det/#findComment-3405745 Share on other sites More sharing options...
r33cruiser Posted October 11, 2007 Share Posted October 11, 2007 (edited) if ur after ideas for an airbox heres mine, on a r33. 2pieces of allie. top of one is press bent. then small rivets hold on threaded fasteners, so screws can go on top for ease. i also have the box lined with heat resistant, and reflective foam. works a treat Edited October 11, 2007 by r33cruiser Link to comment https://www.sau.com.au/forums/topic/172970-help-fabbing-airbox-for-r32-rb20det/#findComment-3406656 Share on other sites More sharing options...
noisia Posted October 17, 2007 Share Posted October 17, 2007 im having trouble thinking up a heat shield design for my r32, the pod is basically sitting upright because it has to fit between the cooler pipe and the a/c pipe i think it is. and im not to keen in extending the rubber intake pipe due to keeping things as short as possible for response purposes. does anyone else have this problem? any pics to show a design someone has come up with, to counter this problem and still keep things cool? cheers Link to comment https://www.sau.com.au/forums/topic/172970-help-fabbing-airbox-for-r32-rb20det/#findComment-3417729 Share on other sites More sharing options...
Rekin Posted October 17, 2007 Share Posted October 17, 2007 here's an example of my crappy diy for the time being. need a nice 3" pvc pipe but got this one for free, so cant complain. ooo never thought of that! Thanks for the pics! Link to comment https://www.sau.com.au/forums/topic/172970-help-fabbing-airbox-for-r32-rb20det/#findComment-3418046 Share on other sites More sharing options...
Craved Posted October 18, 2007 Share Posted October 18, 2007 im having trouble thinking up a heat shield design for my r32, the pod is basically sitting upright because it has to fit between the cooler pipe and the a/c pipe i think it is. and im not to keen in extending the rubber intake pipe due to keeping things as short as possible for response purposes.does anyone else have this problem? any pics to show a design someone has come up with, to counter this problem and still keep things cool? cheers I'll get Sl!m to post pics of his airbox in here. As for shorter piping from the pod to the turbo - this is not going to affect the response of the motor. Link to comment https://www.sau.com.au/forums/topic/172970-help-fabbing-airbox-for-r32-rb20det/#findComment-3419463 Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now