Jump to content
SAU Community

Recommended Posts

rb20 silvertop parts, motor was stripped when cylinders 2.3.6 were low. Found to be cracked ringlands. Everything else is still in good condition unless stated.

head - $100 (cam/gears/covers)

block - $30

inlet plenum - $30

injectors - $50 (with fuel rail, need to be cleaned)

coil pack cover - $10 (2 available)

timing belt cover - $10 (2 available, also have 1 lower cover)

starter motor - $30

gearstick - $10

gts4 sump - $60

r30 stuff

bonnet - $50 (some hail dents, otherwise good)

head lights - $50

grill - $10

rear A-arms from dr30, no discs tho as one was cracked - $40

front struts - $50

L24E - $150 (complete, had 2 leaking injectors when pulled otherwise great nick)

L24E gearstick - $10

newish standard fuel pump, used for about 6 months - $50

starter motor - $30

alternator - $40 (still pretty new)

r180 diff case - $20 (no gears...no nothing)

s15 stock dump/front/cat - $40

all parts located in windsor, nsw

call/sms or PM if interested. cheers.

0432029645

Edited by stu_r30
rb20 silvertop parts, motor was stripped when cylinders 2.3.6 were low. Found to be cracked ringlands. Everything else is still in good condition unless stated.

head - $100 (cam/gears/covers)

block - $30

inlet plenum - $30

injectors - $50 (with fuel rail, need to be cleaned)

coil pack cover - $10 (2 available)

timing belt cover - $10 (2 available, also have 1 lower cover)

starter motor - $30

gearstick - $10

gts4 sump - $60

r30 stuff

bonnet - $50 (some hail dents, otherwise good)

head lights - $50

grill - $10

rear A-arms from dr30, no discs tho as one was cracked - $40

front struts - $50

L24E - $150 (complete, had 2 leaking injectors when pulled otherwise great nick)

L24E gearstick - $10

newish standard fuel pump, used for about 6 months - $50

starter motor - $30

alternator - $40 (still pretty new)

r180 diff case - $20 (no gears...no nothing)

all parts located in windsor, nsw

PM if interested. cheers.

hey mate, do u hav any part of the engine loom? i'm chasing all the electrical plugs off the loom(CAS, TPS, AAC, water temp etc..) cheers mate

Ken

will check for the AAC valve and get back to you.

also check to see if any of the loom is intact...i think i may have binned it.

and i will also check the head casting of the L24

PM\'s replied.

cheers.

AAC is there

wont be able to check the L24 till the wkend as its at the parents house

cheers

ok sweet, can i ask a favour... it only involves 2 screws...

can you screw the AAC valve off the part that it operates...(gold canister with a plug on the end to operate it) and slide it off... underneath there will either be a flatish surface where the aac operates or there will be a tube that the aac sits on... and it comes out a few cm...

reason being is that there are actually 2 types of aac and ive been stung before...

ill send u a pic of the one i need if needs be...

thanks heaps

  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Your car was auto before? You have different diff ratio (auto vs manual i think? or n/a and turbo?)
    • +1 for getting a screen off alibaba, CarPlay/Android Auto is vastly better than whatever navigation cars had 10 years ago. I got an Android screen for my 2015 BMW, huge difference. Fully compatible with factory stuff including iDrive controls.
    • Yeah, my offer was more to show exactly how rough and ready the rig can be and still be useful. Youtube vids will definitely show cleaner setups. Same concept though.
    • I would guess the seal has gone down at the speedo drive and gearbox oil has crept up the drive cable sheath and fouled the speedo head.
    • Any updates on this? Although not a stroker, nor built especially loose, my car has the exact same symptoms. Although I feel they were not there to begin with. Since rebuild with forged parts I have done about 40k kms and it feels like during the last 15k or so, the oil consumption has gotten progressively worse.  Compression test showed - what I thought at least - similar 10-10.5bars in each hole without oil. I have not yet done blowby test though, due to limited garage access. #2 plug is the looks the most foul and that was the one with 10bars. Nothing in the breather tank. I only recently disabled PCV and left only the hoses running from the valve cover via smallish tank to turbo intake pipe there and did some mildish 2nd gear pulls so the car was definitely on boost (1.4bar or so). Removed a hose from the tank and it was basically dry - meaning, the wipe I used had basically no oil on it. Last time I checked, the turbo and IC piping seemed dry as well (will have to see about that again after those pulls). For the past year and a half though, the car has been driven like a granny would for 99.99% of the time, since it mainly serves the purpose of carrying the family around nowadays. A lot of slow, stop and go city driving and most of the trips it barely sees any boost, but gets up to temp properly every time. Although there can be weeks it is not started at all. The car does not smoke, or at least not that I can see. (CAT is in place though). There is slight visible sweating at the Ex cam cover seal and I recently tightened the oil cooler lines as there was some mist on them too. It runs and idles extremely nicely and feels all around healthy. Like TurboTapin, I too am suspicious of my turbo. I have had IC pipes pop out from 1.6-2bars of boost a half a dozen times during the years. The turbo is a HX35/40 hybrid. So, a very similar mystery. Around 1500kms and a litre of oil surely cannot disappear to thin air. Apologies for the wall of text, not sure if any of the above is useful for best guesses/things to check next.  
×
×
  • Create New...