Jump to content
SAU Community

Bcnr33 Ecu Install In Bnr34

GloriaShield
 Share

Recommended Posts

GloriaShield Contributor

GloriaShield

Posted
  • Author
Posted (edited)
buy an BNR34 ecu

Here is south korea. my bnr34 is grey import vehicle and my country don't have any nissan service center for my car.

I have called nissan service center in japan, they said "you must register your dealer, and buy ecu" :thumbsup:

Edited by GloriaShield
GloriaShield Contributor

GloriaShield

Posted
  • Author
Posted (edited)
import ecu from japan - use an importer to get it

It has a problem. They can not setup immobilizer, because they don't have nissan consult. It is only too true. :thumbsup:

Edited by GloriaShield
STATUS Grand Master

STATUS

Posted
Posted
I thought the R34 had a different ignition setup, hence there is a different PFC model for the R34.

So how does the R33 ECU get around it?

i have seen a few R34's running R33 ECU's (cars most likely stolen ex japan) it seems to be fairly common in europe too where alot of the no so legit cars end up. i have been trying to source a r34 gtr wiring diagram for ages but the only one i can find is paulr33's and its not working, reason being is i have a few excess r34 gtr fc's and want to use them on r32/33 it can be done i just need the diagrams.... :D

  • 2 weeks later...
GloriaShield Contributor

GloriaShield

Posted
  • Author
Posted

I fitted a PowerFC to my bnr34 gtr, It wont run at all. Plugged it in properly. Turned off the boost control function.

Maybe immobilizer problem. My country don't have nissan service center. I can't re-code.

I want.. remove immobilizer.

help me please.

wrxhoon Grand Master

wrxhoon

Posted
Posted
I fitted a PowerFC to my bnr34 gtr, It wont run at all. Plugged it in properly. Turned off the boost control function.

Maybe immobilizer problem. My country don't have nissan service center. I can't re-code.

I want.. remove immobilizer.

help me please.

When you say " it won't run" , do you mean , it wont start? wont kick? If it won't kick the trarter you probably have some other electrical problem . Could be immobiliser , just by-pass it and see how you go .

If you don't know how to do it , its not easy, take it to an auto electrician , he should be able to sort it out for you . The s15 200sx has a similar set up , if you have them in your counrty .

GloriaShield Contributor

GloriaShield

Posted
  • Author
Posted (edited)
When you say " it won't run" , do you mean , it wont start? wont kick? If it won't kick the trarter you probably have some other electrical problem . Could be immobiliser , just by-pass it and see how you go .

If you don't know how to do it , its not easy, take it to an auto electrician , he should be able to sort it out for you . The s15 200sx has a similar set up , if you have them in your counrty .

maybe, imobilizer system cuts fuel not spark. by-pass? how ...?

need a standard r34 gtr ecu without mods to get my keys recoded for the immobilizer.

I still want to fix my car so i can use my new power fc ... anyone any ideas....

Edited by GloriaShield
  • 3 weeks later...
ylwgtr2 Grand Master

ylwgtr2

Posted
Posted (edited)
maybe, imobilizer system cuts fuel not spark. by-pass? how ...?

need a standard r34 gtr ecu without mods to get my keys recoded for the immobilizer.

I still want to fix my car so i can use my new power fc ... anyone any ideas....

the key does not talk directly to the ECU on a 34 GTR....the key talks to the immobilizer box then that talks to the ECU....so any 34 GTR ecu will run your car.....providing the key and the immobilizer are mated to each other,you shouldnt have a problem

Edited by ylwgtr2

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      Duncan's V37.......race car?

      By MBS206 · Posted

      Ahhh, I need the whole head unit. I definitely needed to roll back through and review your setup, ha ha! Neat setup they have going on. I just need a full double din head unit. But I want good and responsive. I might have to review what the likes of pioneer have out these days.
    • albyz34gt
      34 de+t conversion using s2 stagea automatic transmission, engine harness and ecu

      By albyz34gt · Posted

      Ok so after much research and talking with knowledgeable people I've got my turbo conversion done and it's all running great other than 1 small issue.  Car has remained auto with the na auto and tcm, I've used a stagea ecu with. NIstune board and everything is great other than my gear selection on the dash. It illuminates park, reverse, neutral, 3rd and 2nd. But nothing drive or what gear your in when you pop it into tiptronic.  I'm sure there is may e 1 wire in the ecu plug I need to move to rectify this. Dose anyone here have any ideas?   Cheers guys
    • Duncan
      R32 GTS (RB20DE) Injectors Replacement

      By Duncan · Posted

      Sorry I haven't been following all the detail, so you may have tried this. Does it idle with the tiniest bit of throttle you can add? You've mentioned the IACV, does it have an AAC valve and have you adjusted it at all (ie, screw the idle adjust screw all the way in, then back it out a couple of turns until idle is stable)?
    • GabsReDeal
      R32 GTS (RB20DE) Injectors Replacement

      By GabsReDeal · Posted

      My bad, I unplugged the one underlined in red instead of yellow before. With the car started, after unplugging the IACV (the one underlined in yellow), it idled at around 400/500 for 3 seconds before stalling. Attempting to start the car without the IACV will not start the car.   It does stutter and sputter for around 5 seconds before dying. However, immediately after starting it, you can already hear some slight sputters from the exhaust.   It won't start with the AFM unplugged. If it is when the car has already started, it stalls in a few seconds.   Yesterday, I did take some logs using Nistune of 3 scenarios. Car idling till it stalls Car idling and unplugging the IACV Car idling and removing the AFM I also have some previous logs of when the Car is idling till it stalls and when driving and it cuts. I am not really knowledgeable enough to understand what to look for. After every test, car idles rougher and rougher, until I have to stop. It will be fine the day after.
    • GTSBoy
      Wheel Sizes & Offsets For Skylines

      By GTSBoy · Posted

      There is no difference between a 17x8 and an 18x8. The total diameter of the tyre needs to remain +/- the same (so you don't mess up the gearing, speedo reading, and clearance when turning front wheels..... so you just need to use a lower profile tyre on th 18 than you do on the 17. /rocket surgery.
×
×
  • Create New...