Jump to content
SAU Community

Help Please! R32 Gtr Surging On And Off

Aussie GTR

By Aussie GTR,
in Engines & Forced Induction

 Share

Recommended Posts

Aussie GTR Explorer

Aussie GTR

Posted
Posted

Can someone help me, I have a GTR R32 that is surging. It feels like it is staving of fuel. When I'm driving along it feels like someone keeps tapping the brake. It does this when cruising as well as when I'm giving it a bit. It also has trouble idling, like it is going to cut out but never does then fires back up and revs quiet high. The funny thing is that it doesn't do it all the time, but it will do it for about 3 or 4 days then go away for a while then come back again. The car has done 110000kms, it's standard except for catback exhaust, timing belt changed at 88000kms and just had new plugs put in it. Can someone put me on the right path please.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • r32-25t
      RB gearbox options

      By r32-25t · Posted

      Brand new r34 gtt box 
    • rbs30
      RB gearbox options

      By rbs30 · Posted

      What is the go to gearbox these days for a RWD RB? Back in the day VG TT boxes were cheap and strong. Seems they are as expensive as an RB25 box these days. What are the options without remortgaging the house? 
    • GTSBoy
      Rim help

      By GTSBoy · Posted

      Define "Nissan big brakes". You just mean standard R34 4 pots? And...it's not even the offset you need to worry about. It's really a detail of how much clearance there is between the caliper and the back of the spoke/face, which is affected more by the design of the spoke than it is by the offset. If you think about it....take any wheel, say a 19x8 that does fit and clears the caliper. Then add or subtract an inch of wheel on the outside, without changing anything else. You have changed the offset by half an inch, but not changed the clearance situation at all. Same for if you add or subtract an inch from the inside edge. The way for you to work this out is to take a wheel off the car, grab a straight edge and a ruler or two, and start to measure the distances from the wheel mounting face on the hub to the outer face of the caliper, and the outer diameter (that faces the barrel of the wheel) of the caliper. Armed with these dimensions and any other measurement that grabs your fancy while you are there, you can then go to the seller of the wheels and do the reverse measurements from the wheel's mounting face and see if there will be clearance to the caliper. There really should be. I have 17x8 RPF1s +35 clearing the caliper face by a finger tip. Those wheels do have pretty thin spokes with some curvature.... but then so do most wheels to suit Jap cars.
    • Notorious Skyline
      Rim help

      By Notorious Skyline · Posted

      So I’ve got a r34 sedan that I managed to get green stickered, meaning I need to go through government approved wof station for my car to be allowed back on the road for some reason my car is certed for 19x8 rims.. I need these wheels  does anyone know what offset will be fine to clear Nissan big brakes? I saw 35et for sale near me, I can’t drive the car to test fit or risk being fined ..   I searched heaps online couldn’t find anywhere..
    • Joe_Way_Jose
      2000 BNR34 new owner

      By Joe_Way_Jose · Posted

      Okay, with all that being said about sloppy blowing from twins, I happily acknowledge the superiority of a single turbo setup on the RB; however, I still plan on double trouble.  I know the -9s were quite popular for some time because they seemed to meet that sweet spot between the -7s and 5s, would introducing VCAM and/or stroking to 2.8L provide the additional displacement/flow to push twins closer to the 500-600 goal?  Does it make more sense for a daily to just do an engine overhaul, slap some -7s on it and enjoy a bit more reliable power?  Has anyone driven a mine's overhauled and tuned engine?  I know they certainly don't approach the power numbers that you drag monsters do down under, but for daily street usage, I just want it to be fun and healthy.
×
×
  • Create New...