Jump to content
SAU Community

Recommended Posts

I've decided that if we have enough interest that I am going to run a Forza 2 challenge.

The challenge itself will be the fastest lap time, around a certain track, with the choice of only 1 car.

Driving assists i am unsure of but will be decided before the comp takes place.

There are a few rules though.

You must be a member of SAU - It is only open to members and if you have a post count of 10 or something you will not be considered a valid entry.

You will have two weeks from the start date to get your time in. A screenshot will be okay, or we can get the times off xbox live if you have it.

At the end the person with the fastest lap will receive a prize.

The prize will be a videogame of your choice up to a retail of 29.95.

For example you could have any platnium ps2 game up 29.95, any Vivendi Best Sellers Series on PC, The "Thats Hot!" range on pc, "Big Bytes" on pc, etc, etc.

I will be paying for the prize and organising the shipping and everything.

Tell me what you think and we can fine tune it. Hopefully we can have it started by the first of July. And it will run for 2 weeks from the first.

You will be required to register before it takes place.

Thanks Karl

Entries so far

- kralster (will not get a prize if i win)

- izataaskyrine!

- DRD-00F

- MrGTST

- DJ Brave

- Scandyflick

I'd like a minimum of 10 so we are halfway there!

Edited by kralster
Link to comment
https://www.sau.com.au/forums/topic/173353-forza-2-challenge/
Share on other sites

  • Replies 71
  • Created
  • Last Reply

Top Posters In This Topic

I will be more then happy to be in it... dont think I will win it but I will gladly make up the numbers :domokun:

And as for the assists... there is no way to prove whether people use the assists or not is there??? Based on that assumption its probably better to allow the assists to rule out any unfair play...

well looking at the scoreboards on the net it says what assist you have used.

but we could make it an honesty thing i guess.

the only assist i don't beleive in is driving line,

cos most cars nowadays have automatic, stability control, abs, etc, etc.

Ahhh okay... I have only had my 360 for about 2 weeks so I am still learning the ins and outs...

Sounds like there is going to be some tough competition... :action-smiley-069:

I hope it allows the basic driving aids like ABS TCS etc cause I am still using those in my career mode :(

ok people, i've decided that the track will be Laguna Seca.

And that the car will be an "A" class car.

I'll let everyone put imput as to what car we will have. But i will finalise everything tomorrow night. And we will start on the 2nd of July and run until the 16th of July.

All entries will need to be in by midnight the 16th of July.

So lets hear some suggestions for cars.

Kralster there are some things that need to be taken into account when selecting the car.

For instance..

Game progression:

Depending on how far everyone is into the game certain cars may not have been won/unlocked.

Price:

Price to purchase car and also price of upgrades (although the more expensive cars have the more expensive upgrades anyway)

I think the car chosen should be a D Class car that can then be tuned up to A Class. This will make it cheap and affordable to all

Thoughts?

Edit: Another thing to keep in mind is that depending on your chosen region some cars are won e.g. ae86 so these should not be selected i dont think

Edited by izataskyrine?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • The cross sectional area of a circular hole scales with the square of diameter. So a 2mm diameter hole is 4x the area of a 1mm hole. Not double. The 1.7mm hole is nearly 3x the area of a 1mm hole. You do not need restrictors at both ends of the oil supply line. If you have new, additional restrictors at the turbo end, that you did not have before, then you do not need a restrictor at the inlet end.
    • Hi all. Been a while but things are moving along. I just have something that I am wondering about. Since I will use OEM turbo oil pumbing, I got myself a new bolt, the one that goes into the engine block oil feed. As I recall (and see visually) this bolt comes restricted with I think a 1.7mm hole? Not quite sure but it was something around that size. The turbos have 1mm restrictor bolts installed, as necessary due to ball bearings and my higher oil pressures. Can I now just use that OEM bolt with the 1.7mm hole in for the engine block or will this actually be too much oil flow restriction and I have to drill it out first? In my head it would make sense for the bolt to be at least 2mm wide as both turbos take "1mm of oil flow". Do let me know if my logic is flawed here, I just want to make sure I don't kill my turbo bearings with too little oil. Don't know if I can trust the saying I read somewhere that ball bearing turbos essentially only need an oil mist
    • There are several aftermarket options available, from not-too-painful moneyhttps://justjap.com/collections/driveshafts-bearings/products/d-max-reinforced-replacement-rear-driveshaft-set-fits-nissan-s13-s14-s15-r32-r33-r34-c35 and  https://justjap.com/products/crank-motorsport-billet-rear-axles-fits-nissan-skyline-r33-gts-t-r34-gt-t?srsltid=AfmBOorQk4xkGUa98kO7v2ePLUiNt-HRrM2AwWNw9mbSIVE1ujBVwY__, all the way up to The Driveshaft Shop https://driveshaftshop.com/skyline-cv-axles/
    • Yeah based on old XRC5964S specs, it looks to be roughly GTX3576R sized? But this 5964S compressor will flow 90lb airflow somewhat similar to the compressors in both the GTX3584RS or G35-1050.. I fully expected the 0.64 rear A/R to choke up top - seems way too small from typical convention - but these are seemingly beneficial over the prior 0.82 results.. Be interesting to see if he comments on the EFR question in that thread - he mentioned in a prior video that BW EFR's were the "cats pajamas 10 years ago", but by the sounds of things all his kits have been using Xona for quite a while now.
    • Yeah it’s still got the oem manual gearbox and clutch, only kinda mods are a blow off valve, coil overs, and a aftermarket intercooler. Also had it for about 2 months now with a lovely midnight purple paint on it.
×
×
  • Create New...