Jump to content
SAU Community

Recommended Posts

  • 2 weeks later...
  • 3 weeks later...
my S1 has a big wing i think its a GTR wing i am like wtf if going on Also do all S1 have air bags cause i don't think mine does  

is there a way of Telling if i have LSD on silvia u pull back seat out and there a sticker

hey the wing is a gtr style wing

air bag was an option until 1995, in 1995 drivers airbag became standard, and series 2 skylines (very late 1995-onwards) all have dual airbags standard

all gts-ts have LSDs standard (i told u this in another thread!)

Sunroofs were an option, at least with S1. Mine was optioned :headspin:

And thinking of I don't think I have seen any S2's with them, at least not as from the factory.......................

']What about sunroofs? where they available in all of them? s1 and s2?? anyone got a series 2 with sunroof?

i cant seem to find a s2 with a sunroof... what would you choice... the upgraded s2... or the s1... with SUNROOF!! :jump:

sunroof was most definetly offered in series two from the factory i have seen a few of them.

  • 1 month later...
  • 2 weeks later...

Differences also include the 40th annv stitching in the seats lol if you've got one..

nismo front bar, rear sway bar in boot, gtr rear wing, sunroof, hicas..

i'm sure these cross into SI and SII - depends on what the original owner got factory..

also what about HICAS - do SI have hicas?

I just bought an R33 which appears to be a S2, its a january 1996 model. What concerns me is that it may not be a real S2 because it has no ABS or sunroof. Does anyone if the very early S2 come without ABS ?

Another trivial but important tip for buyers of secondhand parts.

I tried a series 1 aerial on my series 2 and it's different, the aerial plug is different, the S1 tube is fatter, thusly the screw on crome bit too and the angle of the grommets is heaps less. I mangled the S2 for the arial plug and fitted it, but the angle grommets FMU and it didnt two stage anymore. (notice that the plug surround on the S2 is yellow) With the slimmer tube they made the black outer grommet go through the panel to eliminate earthing / potential rust spot?

so can anyone list the HARD AND FAST FACTS that a buyer can use to tell between a series 1, 2 and 1.5 if they are a different model between 1 and 2?

do ALL R33 GTS-T's come with an LSD, or is it an option?

is there anyway to tell the model of an R33 by any identification numbers etc?

The definative way to check the model is using the FAST software from this thread http://www.skylinesaustralia.com/forums/in...++nissan++check

But simply, the Series 1 v Series 2 differences are in this thread, a series 1.5 looks like series 1 but has the series 2 motor (ie no ignitor pack)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I'll just leave this with, holy shit, those cars at work are awesome, and this will look wicked!
    • Could you modify this duct so instead it pushes the extra air through the radiator too and not down and out? For temps, I know it's not the greatest idea, but as a bit of a last resort, you could use a very intermittent misting spray onto the front of the coolers/rad. You don't want to be soaking them such that water is dripping off, but a small most on/off so that the water evaporates. That point of it constantly evaporating, rather than being soaked in water, will pull a LOT of heat out of the cooler. I'm literally thinking just the little mist sprayers for a garden from Bunnings. Being in a low humidity climate it will help even more! The other trick if you want to be ghetto is some shade cloth hung in the opening, and keep it wet. Pretty much now it's acting like an evap cooler on a house, but cooling the air you need to use to cool the radiator...   On a topic to think about too though, when air enters through the bumper, is it all nicely ducted from the edges of that opening back at a nice angle, or is it like most cars, and the edge of the opening just stops, and suddenly it's wayyy wider behind that? If it does the later, get it shrouded out at nice angles. When that opening changes too rapidly, it can actually cause a high pressure zone between the front bar and radiator, and limit air flow into that area, which means less air for cooling, as it effectively stalls the air, AND adds to drag...
    • Do you have any before and after photos? That's $200 just for the hydro blasting?
    • It doesn't look like there's a lot of options out there these days, and what's out there is performance oriented aftermarket stuff (with the GTR markup) I wonder if there are other cars with similar springs, after all its just a matter of length, diameter and stiffness. Alternatively, I did see coil spacers. Probably not the best option, but could be serviceable too.  
×
×
  • Create New...