Manual Conversion Problems

[Zyros]

Hey, doing a manual conversion of a cefiro a31, not very onto it with nissans (rb20e)

But, we put locktight on the flywheels bolts, to realise these c**ts have spigot bushes, will it be easy to crack the bolts again??

Whats your tips for getting the bush out? Best option?

Also, what you guys use to align the clutch (if you dont have a clutch aligment tool)

Last, Whats that big red cable what looks to be 8guage, what comes off the gearbox with a metal mounting on the end, an earth?? Its long.. (on the manual) thanks!

[turboedsloth]

k here we go

1.But, we put locktight on the flywheels bolts, to realise these c**ts have spigot bushes, will it be easy to crack the bolts again??

just leave it one there you should be able to get it out

2.Whats your tips for getting the bush out? Best option?

id use a little bearing puller. or you can use a screwdriver an hammer and be rough. is it buggered and need replacing?

3.Also, what you guys use to align the clutch (if you dont have a clutch aligment tool)

i use a imput shaft out of a nissan gearbox

4.Last, Whats that big red cable what looks to be 8guage, what comes off the gearbox with a metal mounting on the end, an earth?? Its long.. (on the manual) thanks!

its probly an earth cable. i dont know cos i dnt have one