Jump to content
SAU Community

Recommended Posts

Hi Y'all, as the Topic says, I need an Air Filter Box, pref. with snorkel. - South East suburbs preferred.

Also - I get My old 3.75" Straight through Cat-back Xszorszt back this weekend, I'll post pics next week. Make an offer ;-)

CA18DE, CA18DET, SR20DE, SR20DET are all different so I think 33's (de/det) will be different also. The hole for the AFM is on different sides/angles and sometimes there's extra holes and blah blah. (will look at FAST later on and let you both know for sure)

I think we MIGHT have an RB25DET box but I'll have to check later, on way out right now and I can't remember.

I know I have 2x snorkels if you don't get one with the box at least.

I'll send you a PM later :O

~Kaz

Ok had a look.. we actually have an RB25DE box not a DET.

They are virtually the same (DE<>DET) except for the bottom as far as I can tell... ie it fits differently into the engine bay... which might not be a problem but it depends what's underneath in terms of piping etc I would think.

1st pic is RB25DE 96-98

2nd pic is RB25DET 96-98

3rd pic is RB25DE 93-95

4th pic is RB25DET 93-96

They have slightly different part no's but the alternate part no is the same and they look the same, so I don't think there is a difference between series 1 & 2..

Snorkel is the same for both DE and DET.

Umm hope that helps ;)

If anyone wants an RB25DE box, let me know..

post-19275-1182433464_thumb.jpg

post-19275-1182433490_thumb.jpg

post-19275-1182433504_thumb.jpg

post-19275-1182433521_thumb.jpg

And he will pay CASH..

Beats getting 2 chickens and a pig.. :laughing-smiley-014:

:laughing-smiley-014: Gold Wayne!

I tried to think of something to say, when i read the thread last night, but couldn't think of anything clean. :cheers:

Thanks Ferah.

PM me with an offer if you are interested in the box and snorkel.

hhmmm.. . . I was thinking of paying in beer, but then who'd go for that? nobody! so figured ca$h-money is safer :D

I'll probably be putting the stockie intercooler back in (better safe than sorry) and I think I need the RB25DET airbox to clear the return pipe from the factory I/C. So thanks Kaz, but I'll run with the turbo airbox.

actually, now that I think of it.. . . I'd really like 2 chickens & a pig.. . . mmmmm.. . . . Tasty !

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • yeah i agree paint match stops it from standing out so much, oh that's actually really good to know i was wondering if it would help with air flow now actually having an outlet in the bonnet. Will have to focus on ducting into and out of the radiator now to make the most of it.
    • I would paint match the whole thing to avoid unwanted attention  I had a similar bonnet, paint matched, on my old R33 GTST, but mine was a fibreglass jobbie made by Blitz in QLD, they work extremely well for radiator efficiency and under bonnet temps
    • Does anyone run this kit with factory plenum? Does the adapter and bosch tb fit under factory strut brace? I wanted to get this setup before going forward facing manifold. Thanks
    • small update time, after always wanting a "cool" looking bonnet for my car and always struggling to find one for the series 2 that i liked and wasn't an insane amount of money. Saw one i liked on RHDjapan from D-speed in Japan the price was very good for a carbon bonnet so good infact i was a little unsure how much i trusted it, decided to bite the bullet and with the help of jesse streeter in not long at all it was at my door. Once it was delivered i ran in from work and quickly unboxed it and to my surprise the quality was actually pretty good i quickly removed the old bonnet and placed on the new one to test it out and even the fitment wasnt too bad at all. Then decided to paint the little grille in the bonnet black to stop it sticking out so much.   I decided to not mess around with the hood latch and just install some aero catch hood pins, having never installed them before did some YouTube university classes and i was good to go. fair to say it is not a fun job at all from making brackets so the pins sit nicely and actually cutting through the bonnet but also being very scared of cutting the holes too big it took wayyyy longer than i would like to admit but finally got it there. Then it was time for a quick test drive to ensure the latches actually worked and thankfully the bonnet looked very stable. I still think paint matching the bonnet and leaving just the part that sticks up as carbon would help make it all look alot neater as im not sure how i feel about all that carbon on a very fridge white car but will leave it as is and see how i feel with time.  
    • I think it's bound to happen, you finally get it all perfect, and bam, something will happen. I took a while to get a Commodore rear quarter repaired where a P Plater clipped it. Two days after getting it back, Sarah wiped it out on a concrete pillar in an underground car park... This is why I take forever to repair them, it stretches how long until it gets bent again... 😛
×
×
  • Create New...