Jump to content
SAU Community

Recommended Posts

Hi Y'all, as the Topic says, I need an Air Filter Box, pref. with snorkel. - South East suburbs preferred.

Also - I get My old 3.75" Straight through Cat-back Xszorszt back this weekend, I'll post pics next week. Make an offer ;-)

CA18DE, CA18DET, SR20DE, SR20DET are all different so I think 33's (de/det) will be different also. The hole for the AFM is on different sides/angles and sometimes there's extra holes and blah blah. (will look at FAST later on and let you both know for sure)

I think we MIGHT have an RB25DET box but I'll have to check later, on way out right now and I can't remember.

I know I have 2x snorkels if you don't get one with the box at least.

I'll send you a PM later :O

~Kaz

Ok had a look.. we actually have an RB25DE box not a DET.

They are virtually the same (DE<>DET) except for the bottom as far as I can tell... ie it fits differently into the engine bay... which might not be a problem but it depends what's underneath in terms of piping etc I would think.

1st pic is RB25DE 96-98

2nd pic is RB25DET 96-98

3rd pic is RB25DE 93-95

4th pic is RB25DET 93-96

They have slightly different part no's but the alternate part no is the same and they look the same, so I don't think there is a difference between series 1 & 2..

Snorkel is the same for both DE and DET.

Umm hope that helps ;)

If anyone wants an RB25DE box, let me know..

post-19275-1182433464_thumb.jpg

post-19275-1182433490_thumb.jpg

post-19275-1182433504_thumb.jpg

post-19275-1182433521_thumb.jpg

And he will pay CASH..

Beats getting 2 chickens and a pig.. :laughing-smiley-014:

:laughing-smiley-014: Gold Wayne!

I tried to think of something to say, when i read the thread last night, but couldn't think of anything clean. :cheers:

Thanks Ferah.

PM me with an offer if you are interested in the box and snorkel.

hhmmm.. . . I was thinking of paying in beer, but then who'd go for that? nobody! so figured ca$h-money is safer :D

I'll probably be putting the stockie intercooler back in (better safe than sorry) and I think I need the RB25DET airbox to clear the return pipe from the factory I/C. So thanks Kaz, but I'll run with the turbo airbox.

actually, now that I think of it.. . . I'd really like 2 chickens & a pig.. . . mmmmm.. . . . Tasty !

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Thanks for the reply @GTSBoy this is is a hydraulic lifter engine. Yea right i did not realise the lifters were supposed to be compressible while installed. I could push them down but i had to lean almost my while body weight on them.  I have never heard of a lifter/ lifters ticking only at hot idle and getting worse the hotter it gets. I have owned a few jdm cars with noisy lifters. This noise is slightly more subtle, it is more of a sharp gentle metalic tic than the solid and more loud tapping I've heard on lifters. I have used a metal rod, alloy tube, hose and stethoscope and could not find the source of the tick. But it appears to be loudest on the actual engine block behind the exhaust cam gear and next to the oil filter. I had mate (40 year old mechanic) go over it with me and he couldn't find it either..  Could it be a cam seal issue of some sort?  Cheers  
    • This seems problematic and unlikely at the same time. Vanilla RB2Xs have hydraulic lifters. They do have "zero" clearance, but only when running with oil pressure inside them. When not running, you should be able to compress them and obtain heaps of clearance. RB26s and Neos have solid lifters. They should have ~0.3mm and ~0.5mm on the inlet and exhaust respectively. If they have zero clearance then bad things are happening. With nothing else being wrong, it would mean that the valves would be held slightly (ever so slightly) open when they are supposed to be closed and it should have all sorts of problems when running, caused by leakage in/out through the valves. Or, zero clearance can indicate severe valve seat recession. None of it is good. Have you used a piece of hose as a stethoscope to try to localise the noise?  
    • Sorry for reviving an old post, but I'm having the same hot idle tick issue. Did anyone ever find out what it was?  I have checked/ replaced Injectors Coils checked Lifter clerance (is at zero) Checked Cam lobes Replaced exhaust gasket and studs Would appreciate any advice this is driving me nuts  
    • There's a huge reason manufacturers are tuning in dead flat torque curves... Make them reliable (and more drive able)
    • What HVAC actuator is under the steering wheel? Do you mean on the RHS of the centre console, immediately to the left of your shin? If so, then yes, it is probably that one, because that is the mode door actuator, and from what I know, it's still a pain in the arse to replace. I don't know about whole dash out, but you certainly have to rip into the centre console section. I don't know if it's covered in the workshop manual, as I haven't spent much time looking at those parts of it. (and by "the workshop manual, I mean the R32 GTR one, which is the most comprehensive one we have, and it should be similar enough between that and later cars to serve as a guide).
×
×
  • Create New...