Great Ebay Body Kits

[cheez]

hey guys

just bought a front bar off ebay off a seller going by "mybodykits". check him out. i was a bit scepticle at first but he had a great rep with 16positive responses and 100% positive.

payed for the kit on sunday night, he cleared my funds on tuesday morning, and item arrived today. absolutely great looking front bar. i payed 220 + 65postage.

check him out. photos attached of my bar.

BTW its the Trial front bar for the R33 skyline. will let you know how fitment goes on the weekend.

daniel

Edited June 24, 2007 by cheez

[/2on]

Yeah def tell us how it fits cause if its as good as you say it is, ill get something from him too then cause ive been wanting a new bar to replace my ugly stocko one

[BAMR33]

They're the best looking front bar's for 33's IMO. Except the round indicator's are a bit out dated, but they can be fiberglassed over .

[lingeringsoul]

omg he sells the GTR front bar for 220 cheap.....just what im looking for

[maximumrpm]

i have bought pods off ebay and they were the worst quality and did even come close to fitting...and when i contacted the member he said he doesnt do refunds or returns...so watch out

[cheez]

ill be fitting it either tonight or tomoz nyt. from the looks of it and the measurements that i took off my stock bar i got at home, its pretty close. wont need much to fit perfect. with all the interest in kits if we source a good supplier we might even be able to organise discount prices for forum members but still 220 for most of his bars is cheap and a full kit for 520 plus postage. dont get much cheaper

[DECIM8]

is it thick ?? from most ive heard they are crap look for dips and uneven edges round the headlights and also the side wheel pannels

[cheez]

it is very tuff bar. bought 2-3mm thick not just some flimzy thing. no dips around head lights but it is visible around wheel wells where he has hi filled to cover slight imperfections when being removed from mould but hey its been cleaned up already for me. has some slight little marks on it not in obvious spots but a small amount of hi fill and a sand and ready to prime.

IMHO it is great. highly recommend any1 to purchase his kits if they all have the quality that mine does and also fittment, still havent put it on. will do either later tonight or tomoz.

[lingeringsoul]

i'll wait until you finish before ordering mine, at least then i'd know how well it would fit

[BAMR33]

I noticed in your avatar you have or had a GT-R front bar which one out the two (gt-r or trial) has more ground clearance?

[UNR33L]

how much would it cost to spray + fit a front bar like this? or is it easy to do yourself? keep in mind Im fairly nooby but my dads pretty good at this stuff

[Spunky Munky]

I've seen a few bodykits in my time - trust me, what you bought is deefinitely at least medium to high-class quality... look at how smooth the texture is and there are no air-bobbles etc... what you have done is saved money for other mods.... well done... only 2 things now... fitment... how does it fit... secondly... is it heavy-duty or will it crack in a couple of months...

But seems great....

You got a link to one of the dude's items??

Edited June 22, 2007 by Spunky Munky

[cheez]

ground clearance is about the same. i think there is about 3mm difference with the trial sitting slightly lower.

to get a shop to fit, prime and spray probably 400-500. to do your self is easy, just a light rub with 600grit wet/dry, hit it with a primer, you can by them in a can now days from supercheap, rub again with a 800 or finer grit to ensure no marking and hand over to a panel beater to spray. then like 200-250. with fitting its a matter or drilling 4 holes on the side for the gaurds and 2 at the front section for under the grill.

its definitly of a more heavy duty bar, very strong and not flimsy. ill post once i get it fitted today, am working atm but later me and a mate are doing the fittment. easy.

link foir this guys other items: http://cgi.ebay.com.au/Brand-new-Trial-Rea...1QQcmdZViewItem

thats for his trial rear bars, but when in there go to view other items from seller and it will have more. or other wise send him an email and he can let you know what he has in stock.

[cheez]

ok guys

i fitted the front bar last nyt and too my shock it fit pretty well. all that was needed for me to do was to drill 6 holes, normal mounting points for bar and it will need a small packer under each headlight to minimize the gap, and cooler hole deepened.

around the guards was perfect. it sat real good. no manipulation needed. indicators sat in the holes correctly and yeh was a good fit. cant forget to mention tho, i had to cut some of the ducting at the back for the cooler to squeese in, it is evident that the bar was designed to be mounted without the front mount and only the standard side mount. no biggy tho, angle grinderworked good.

oh yeh, with regards to d1 slots in the bar, i had to remove some of the reo to allow them to sit right but thats necessary even with the gtr style bar.

and if anyone gets these guys front bars and needs a hand with fittment, im more than happy to help out.

daniel

[lingeringsoul]

Woot!! looks good, might actually just go buy one next month.

[adam-__-]

Looks really good mate. Money well spent

[Sol32]

Shame there are only a couple to choose from in the way of skylines...

[UNR33L]

Looks great mate so tempting to get one but don't really have the skill to fit it. Maybe if i get one in the future ill hit you up a PM for a bit of help, you'll be compensated of course

[Spunky Munky]

Thanks Cheez Michael Michaels (hi hi hi .... Blades of Glory)... hi hi...

Wow, it looks really nice... from what I can see - the quality is pretty good bro, good job!! You've spent pretty much half of what you were suppose to spend on the bar, paint and fitting - more money for other mods... doesn't it feel good when you spend money well and wisely? Good on ya bro... thanks for offering to help out... Might drop you a PM soon as I might get a new front bar...

Regards matey!!

[cheez]

yeh no dramas. for those that need a and just let me know.