Jump to content
SAU Community

Recommended Posts

Hi, i was out at willowbank tonight for 7-11, met some other skyliners as well. I got in 5 runs fer the night and i got there at ard 730pm and left ard 1045pm, could have been more runs if i didnt go out to get more air in my tyres. It was a good night out and i finally got my ass into the 11's. LoL, i still suck big time on launching, someone give me some lessons on launching manz. ;) who else was out there tonight? Anyone had pics? I was in the white GTR32 with the GT wing.

Best run was actually my first, did a 11.79 @ 119mph, got a run in later with 12.08 @ 124mph, so obviously i suck at launching. :) But being on 18" wheels, i'm still pretty satisfied with the results. Prolly with more practice, i could do my car justice by clocking low 11s. LoL~

Link to comment
https://www.sau.com.au/forums/topic/173763-7-11-willowbank-2106/
Share on other sites

from memory launching in my old AWD GTiR and GTR was .. 5000rpm and riding the clutch out power more and smoke ur mirrors... i miss them cars..

my mate told me a story from his mate when he used to work on the GTRs in bathurst.. one team sent a memo to nismo/nissan in japan saying they cant get the thing to get off the line.. just kept bogging down.. and nissan replied litterally, give it some stick u women 7500rpm and dump it..

lol story was something along the lines of that..

11s congrats.. ;)

from memory launching in my old AWD GTiR and GTR was .. 5000rpm and riding the clutch out power more and smoke ur mirrors... i miss them cars..

my mate told me a story from his mate when he used to work on the GTRs in bathurst.. one team sent a memo to nismo/nissan in japan saying they cant get the thing to get off the line.. just kept bogging down.. and nissan replied litterally, give it some stick u women 7500rpm and dump it..

lol story was something along the lines of that..

11s congrats.. :)

Thanx markimak~ LoL well yeah i tried dumping it at 7000++, but i will just end up with my rpm dropping down to like 3000 and end up losing lotsa time when i throw my clutch. Just didnt seem to be able to get a good launch, i dunno if it's my 2way lsd. I think riding the clutch out and not dumping it seems to be better. Ideally with 17s n a better launch low 11s should be achievable. But oh well just wanted to go out n get a few runs in and have some fun. I'm not too serious abt drag~ ;) And sheesh it sure is getting cold already these days~

Not bad time good stuff, what point where you shifting at you werent shifting too early were you, as for the mph it should be alot higher id have to say for the power you have :S go figure there time to get yaself some smaller rims and/or stickier tyres and practice practice practice ;) oh and for the 2 way lsd, That helps never hinders on times Overall have to say good stuff

Hey Jyo,

I saw you on the drive back in your car, I was in the Maroon gtr with stockers etc. and my bro behind me in the black r33 gtst. Was a good night, hard to get traction to begin.

Did you see that Blue R33 gtr? had mad big horsepower but he had heaps bigger probs gettin it off the line- total wheel spin! Nice sound and gr8 burnouts though.

Best we could get out of the R33 was 13.2 pretty stock though so happy with that, and best outa my gtr was 12.6 which is also very stock except for pods and exhaust

good fun, all the best

yeah not saying the massive8k dump is the way to go but.. that was the story i heard from my mate.. and coincidentally he ran a 12.6 in his near stock N1 GTR

:bunny:

if ur keen ill give launching a try in ur GTR.. i use to get my old GTR off the line easially.. my friends wer amazed with pulling like 3-4 carlengths on ther silvias.. haha ther faces was priceless.. 5000rpm and ride it out to 6000rpm and boom... bye bye... was using 225 17s and they spun up a lil.. and with the 245 it was noticably quicker..

the G force u feel with a decent launch..

Yeah it should be faster, i need to work on my launch n shifting i guess~ :rolleyes:

Thanx Devil~ :blink:

madr32: yeah i saw u guys on the way back! :yes: Well fer me the launch is my biggest obstacle somehow. But overall was a good night, am satisfied with the times 2nd time out at willowbank~

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • BTW, the reason I came in here to "update" this list was that the Garrett G Series II range have been released and I've updated the list with their flow details if you're curious to check how they fit with previous Garretts and other brands The G-Series II G35 990 looks like a banger...
    • Hi all, I thought I'd put one of these references in here before but it seems I haven't - not sure how many people are actually using this place still but I feel like there are guys lurking about who might find this reference useful or interesting.  A lot of the time people don't catch key details or even fully understand how compressor maps work - or don't even look at them and just go from heresay about deciding how different turbos may compare, but I've been putting together this table over the years as a quick reference to get a gauge of how certain compressors compare to cut down the time that can be wasted looking around aimlessly. * This relates purely to compressor flow, so won't necessarily reflect the outright capabilities of these turbos as the power potential also comes down to the turbine side.  If you understand this, you should be able to use this 😃 * The inducer and exducer size listed are the mm of just the compressor wheel * The values under the "psi" headings are "lb/min airflow" and reflect the maximum airflow that compressor supports before it's efficiency dips under 65%, or it reaches it's maximum speed - whichever comes first. Any questions, or requests for other turbos which the compressor map is available for then let me know 🙂
    • And what you pay for a pack of 8 bolts and nuts at Bunnings, will land me 200 of the same nuts and bolts from a fastener shop.   M12 * 1.25 IS a standard. It's not like ordering M12x1.25 and hoping the thread pitch is right. Unlike ordering an ounce, will get you 4 different amounts depending on which ounce someone takes it to be. Your issue is a supply issue.
    • Try using Penrite 80W140, has Limslip predosed into it 
×
×
  • Create New...