Jump to content
SAU Community

Recommended Posts

hi, i tried searching but didnt get exaclty what i wanted.

Anways, i need to take my r33 to a suspension workshop to have it looked at. My suspension is so damn stiff and squeeky and is such a bad ride. Ive got ohlins shocks at the back and i think standards at the front. I think all springs are standard, though im not too sure. Does anybody kno any good places in sydney, preferrably western sydney where i can get the suspension looked at. I want them to look at all my bushes; castor, camber, toe, springs, shocks for leaks. you get the point.

ive heard mixed opinions with pedders but has anyone got good experience with any in sydney without me getting ripped off. such as blaktown or penrith I just want an inspection first, then i can go from there. Maybe there $14 check may be the way to go, but im just worried they might list items that are not necessary. Sydney kid has recommned heasmans , excellor, st.george, east coast and adrian moore suspesnions. Has anybody had expereinces with them?

Any help would be appreciated!

Cheers

Anton

Link to comment
https://www.sau.com.au/forums/topic/173840-suspension-workshops/
Share on other sites

hi, i tried searching but didnt get exaclty what i wanted.

Anways, i need to take my r33 to a suspension workshop to have it looked at. My suspension is so damn stiff and squeeky and is such a bad ride. Ive got ohlins shocks at the back and i think standards at the front. I think all springs are standard, though im not too sure. Does anybody kno any good places in sydney, preferrably western sydney where i can get the suspension looked at. I want them to look at all my bushes; castor, camber, toe, springs, shocks for leaks. you get the point.

ive heard mixed opinions with pedders but has anyone got good experience with any in sydney without me getting ripped off. such as blaktown or penrith I just want an inspection first, then i can go from there. Maybe there $14 check may be the way to go, but im just worried they might list items that are not necessary. Sydney kid has recommned heasmans , excellor, st.george, east coast and adrian moore suspesnions. Has anybody had expereinces with them?

Any help would be appreciated!

Cheers

Anton

Heasmans are good if you tell them exactly what you want :bunny:

Well I don't see any problem starting with pedders, their checks are cheap and pretty thorough. Just if you decide to go with them to fix things have a real good look over the list first and consider other sources, eg bushes etc.

The fact is that most suspension partts are pretty worn after 100,000klm so a lot might need replacing - its a good idea to have it checked out so you know.

BTW if it feels really stiff it won't be stock suspension. The ohlins are probably pretty good shocks (at least when they were new) and it would be strange to put them in with standard springs and standard rear end. Maybe measure up your front and rear spring sizes and post in Gary's thread to find out what rate they are?

Worn bushes, old shocks and worn rod ends will cause a loose feeling, unpredictability and clunks but not a firmer ride.

ok had a better look with jack today, it appears ive got coilovers all round..back ones look fine, front are leaking bad..oil is also heavily noticable on the bushes...ill fix that up but im thinking, its worthless getting the shocks repaired but i dont have much money to waste atm..im not going to be using this car for track, so do you think i can jus source some standard strut tops and put springs on for the front..

Edited by moonus

muahahha I hope you don't mean me I am drunken not knowledgeable.

moonans take them to heasman's at rockdale they are the ohilns dealers, they can test them and tell you what is wrong, what they cost to fix and what they are worth

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • yeah I've never understood that either.... And to answer an earlier question, I write the date on open bottles and throw them if more than 12 months old (which they almost always are, because I don't need to bleed them unless I'm changing lines/calipers etc in between)
    • Nah, the one that hit the boot was a big steel locker, around 6 foot height, 4 foot wide and 2 foot deep, empty it weighs about 15kg and had about that amount of stuff in it The photo didn't give a good representation of the actual damage, the large ding on the passenger side was about a inch deep, the one on the driver was about 1/2 inch deep, right on the curve, where the inner boot frame doesn't let you get behind it with a dolly Basically the same issue with getting behind the damage on the centre of the boot We could have filled it all with bog, but my OCD would be triggered every time I looked at it, knowing what hides beneath  As for the locker, I did get the shits with it and put it in the scap metal bin, but, I pulled it out and it is now sitting in the garage at home full of car servicing stuff, cleaning gear and random tools, it's going to pay for it's indiscretions
    • Whilst I typically don't cheap out on things, if I can save some money, like $1000, on a clean straight panel, that gives me $1000 to spend on other stuff, basically free money really 🤔 🤣
    • Is the toolbox that damaged the boot seal the same item that fell on the car during the storm a while back?
    • Who are you to deny yourself? I’ve said this many times to myself and apart from getting what I really want, I go quiet for a while whilst working out what I just did to my savings and how will I afford what it cost, then, next payday…
×
×
  • Create New...