Jump to content
SAU Community

Recommended Posts

yeh... 1st gear was shit as expected, but second had nothing either.. heathcote track was pathetic... I had much less traction on the strip after a 2nd gear burnout that on the street with cold tyres

anyway, i wanted to see how the car went with its street setup :ninja:

if i set the car up properly it'd be eeeasy 11's

14.9sec @104.14mph on a wet track at heathcote. Only get to do 3 runs.

Looking for a mid 13's this weekend. And some better tyres.

Hey mate,

What engine/suspension mods and what power are you making?

Cheers!

Hey mate,

What engine/suspension mods and what power are you making?

Cheers!

Hey mate, When I had my run at heathcote i got a return flow FMIC, POD, 3 inch turbo exhaust, 10psi, BC coilovers (6/8) and a shitty cheap tyres i got from my brothers SS v8.

i reckon il take off better with my pedders springs.

I made 189rwkw with out the FMIC at my last dyno on 10 psi.

Im gonna giv it another go and run on 11psi with better tyres. (Feels good) lol

Should make mid 13's or lower.

Edited by tavstar34
  • 4 weeks later...

Update to my PB.

Heathcote 26/9/10.

RB20 GTS4 13.57 @ 105.51mph. 60ft 2.01 = crap, but i've had a 1.8 before....

motor on its last legs so won't be running again till new RB20 goes in :)

Looks like no one updates the times on 1st page?

hmm going to have to find my slip i think....but at the time I had 255 rwkw, 255's and 110 mph @ calder.

Thanks heaps for doing the list...so surprised to see where my whale comes amoungst some impressive vehicles.

what kind of 60ft did you get?

street tyres?

how many rwkw?

it'll be good to get more info, its a pretty decent time mate. :huh:

Yeah sorry mate,

Got 1.7 60ft

Was running Nitto Nt's drag radials which wernt the best (these need a bit of heat to get really grippy which didnt really help me). ive now bought a set of MT street radials which i hope are better off the line.

Was running 350 awkw.

Yeah sorry mate,

Got 1.7 60ft

Was running Nitto Nt's drag radials which wernt the best (these need a bit of heat to get really grippy which didnt really help me). ive now bought a set of MT street radials which i hope are better off the line.

Was running 350 awkw.

thanks i'll add it to the list.

what turbo were you running?

  • 2 months later...
  • 2 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Ok gotcha, so one post to fpr  another to bov  and I have the mishimoto boost controller and a link g4+ so I’d just have the tuner set it up properly. For the last two from plenum post throttle to  ecu/ boost controller, I know that I have a hose coming from the ecu that I was confused about so I assume that’s what connect to the boost controller from the ecu? And then the last is just from plenum to boost controller then to wastegate?
    • From there, it was just a quick electrical check, prime the oil and start her up Which, is not what happened. 1. Bloody seppo Aeropro battery holder. Not only was it too tall for the battery (which I'll forgive them for, I have another battery the same nominal size that is taller than Neil's one, but the bracket is a fixed height so the battery was spaced up) But the thing that really shits me is the hardware to hold it on requires a 7/32 Hex key. WTF. No-one will ever be able to remove or install the damn thing without a hex key they don't own 2. Kill switch no longer worked once the console was installed. Neil mentioned above he had to adjust the length but it no longer cleared the console once installed. Sorted. 3. Suspiciously, the brake light holders were hanging in the boot with no globes. Sure enough the stopper on the brake pedal was missing so they are always on unless the kill switch is activated. Will pick one up tomorrow (turns out 32 and 33 don't use the same stopper) 4. All that sorted, I turned on the kill switch, turned the key to ACC. Nothing. Turned it to IGN. Nothing. Checked some fuses and found the main IGN in the boot was missing which improved things once it was replaced. Now ECU and dash lights turn on with IGN but still no fuel pump. 5. Turned it to Start....ECU on, no fuel pump, no starter. Plus the voltage dropped straight to 9v.  I suspect the starter is f**ked but am going to have to work through it all and see what is happening, really looks like more than one issue. Does anyone have the R33 fuse box key with the circuit it sources from (eg BAT, ACC, IGN, SRT etc) and supplies? I can find a translated list showing Amps and circuit without supply circuit, and I can find supply circuit without Amps and target circuit.
    • 3rd time lucky, the AAC is now all plumbed up after getting some final fittings All set up under the plenum of maximum access
    • OK, so the weight has been bugging because it was really low. I did it again today and got a more believable answer at 1246 without driver And with a 93kg driver I'm pretty sure the car was still slightly on the quickjack last time meaning the full weight was not on the scales  
×
×
  • Create New...