Jump to content
SAU Community

Recommended Posts

hi,

just wondering what you peeps out there do to get rid of any annoying interior squeaks and noises?

I have a couple, and firstly, find them hard to pin point and second have no idea how to get rid of them.

I have an R34 and the area around the top guage cluster has a bit of a creak to it, not sure where exactly.

just wondering if anyone has any processes they use to elimante unwanted noises, or if anyone knows of any common causes for the squeaks, etc...

cheers

yeah its a bitch aye. Try taking off the interiour panel and putting a really thin sheet of foam/sound deadening under it. Or maybe a drop of silicone over the metal clips so they dont vibrate

I always try and push on everything at different points while it's rattling.. see if I can narrow it down to the bit of plastic, panel, etc that is moving around. Often it's just a screw undone..

After I've found it I'll shove a bit of folded paper in there, or obviously replace the screw.. generally I'm pretty successful at getting rid of them on most of the cars I've had.

yeh bro ive got an r34 n somewhere in the back seats where the plastic overhead things are theres a major squeak noise everytime i go over bumps..n it also comes n goes..

some days its nice n quiet and some days u just wanna rip the interior out

whenever I turn up the stereo my splits make an annoying vibration noise in the rear parcel shelf.

Not sure if it's the plastic brackets or the speakers, but it's very annoying, anybody got any tips?

^ so Porshe's come with felt tape from the factory?

felt tape.... silicone stuff... foam deadening.... paper :) - some good things in here :blush:

i've got one "creak" on my drivers door, in the cloth/fabric section (under the window) how would i get behind there? take the whole door trim off? i've NEVER dismantled any trim before, is it fairly easy to do?

it is. just remember to go slow the first time, be careful and make sure you are applying force in the right spots. once you've done it once it becomes a lot easier. try to be even in you pulling too. if you are bending things that arent meant to bend, you are gonna do damage.

EDIT: re reading that bit of advice, i rekon that it can be applied in a totally different "first time" situation too :D:(

That's pretty true. I don't remember or wouldn't have noticed on our old 320i, 528i. But the 530i i believe is squeak free, the 335i has a little one that's popped up (and considering it's less than half a year old, that's not too good) but the suspension is much harder. The 318i has a few noises.

i think the stiffness of the suspension plays a huge part. The stock R34 suspension i find is actually quite stiff, or the shocks are crap, or something, i dunno.

I have an annoying creak in the passenger side inner rear trim, the one that runs along the top of the rear window and down...

Ive tried squeezing silicon filler in there, and still no dice.. If I knew how to remove the bloody thing I could get in there and take care of it properly! Anyone happen to know how these panels come off?

my door tirm has the sounds..

if i press down or put my arm on the door trim while im driving it crys out like a pig...

same as passenger side door trim..

and also if i press down the back seats, it makes metal scripping sounds... i think its because of bushes... anyway...

i have to dissemble those trims and put somethings between connections.... i hate that noise....

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...