Jump to content
SAU Community

Recommended Posts

Hi

I am selling

RB20/25 High Mount XTR stainless steel manifold.

Turbosmart 38mm wastgate.

Garret 3037 Turbo.

Kit price $2500

This is a fulll turbo kit for a RB25DET and will fit a RB20DET.

These items are basically new. They have been run once on a dyno for approximately 2 hours.

Reason for selling is that I am upgrading.

PM me or phone 0419 504 338

Cheers

  • 3 months later...

Hello,

I have just upgraded my original post of selling my manifold and gate to now selling my 3037 turbo as well.

I am now selling a full 3037 high mount kit for a RB25DET gate and manifold included.

Feel free to contact me.

0419 504 338 or pm

Cheers

Hey bud,

Unless im way out of touch the price is very fair especially considering that it is basicly all new and $1100 cheaper than you would pay for it new.

The car was never fully tuned as mentiond it was only on the dyno for 2 hours and then switched off, but it was pushing an effortless 280kw at the wheels with heaps of response. My other mods are extensive but at 280kw they were of no real effect. As long as you have an exhaust, cooler and injectors, 280 - 300 will be easily achivable on a stock 25.

Awesome turbo kit mate, I run the HKS variation on my car and everybody who rides in my car comments on how responsive it is for the power it makes. I can honestly say whoevery buys this is going to be one happy chappy..........unless its a girl then she would be one happy lassy i guess

  • 4 weeks later...
  • 2 weeks later...
  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • For me at least the reason why it bothers me is because it's indicative of a deeper problem. And that will nag at me forever. Especially because I have tailpipe emissions testing + evap leak testing every 2 years.
    • WELP. I went to the track, and I suppose it went okay because any time you can drive home is okay. You may notice the car is not on the circuit in this picture. It was about 35C day out in Benalla which means the track was approximately the surface of the sun, probably. Good things, car did not overheat but it _was_ warmer than when I had done track days in similar heat before, I think, I'm not sure - I can't quite remember. Coolant got to ~105 via the ECU after 20-30 minutes of belting it in said heat. Oil got up to 145C in one instance which is pretty crazy due to oil cooler. Pressures were fine. I seem to remember this not getting quite so high before the vents. More HMMMM'ing to be done. On the subject of HMMM'ing, can anyone identify the sounds in the video below, you will know which ones I mean: https://www.youtube.com/watch?v=uj3BkI2cbTc I included some 'normal' sound as a reference for the first minute or so. The microphone in this instance was where the license plate is. It stopped working later in the day which is why my "best example of a lap video (not produced)" had internal audio - Isn't hearable from inside the car. I don't mean the chirping of the un-bedded/badly bedded track brakes which you can only hear while braking... Thoughts, brains trust?
    • blame old mate Hawkins for that one  I remember way back in the day the japanese didn't want them either... they always assumed a race shell would be thrashed. We found a few when looking for an R34 GTR for the Whites to drive in Targa Tas back in 2002.
    • I know it's probably not going to cause any major engine issues. I just had a more generic concern that it's technically not running right (I guess this means the rpm is not sitting where it technically should be) Though the other thing is, it's that my steering wheel is shaking at 1,100 rpm at idle until it gets warm (seemed to happen after I tightened my alternator belt, will be testing the alternator soon).
    • I mean, what's the concern here? Higher fuel consumption? FWIW my idle sits at around 800rpm or so as well. And yes, it runs fine, idles fine and there are no issues as far as I can tell. I don't quite see the problem.
×
×
  • Create New...