Jump to content
SAU Community

Recommended Posts

hey i bought a f**ked r34gtt from #some-place# live in alice the control arm was the wrong 1 the brakes was glazed ther was an oxy burn to the left front rim they installed a front mount and dident bolt it down and the turbo blue within 2 weeks and all the paint is flaking of the front bumper

:: edit'ed by paulr33 ::

we can't allow workshops to be named unfortunately

Link to comment
https://www.sau.com.au/forums/topic/174100-so-and-so/
Share on other sites

We're you there to check the car out in person? Wouldn't you have been able to see what was wrong with the car? I'm not trying to be a dickhead, but the only person you can blame is yourself. You should've checked out the car properly.

If you had put a deposit on an ordered car or something and they gave you this car, forget what I said above.

Link to comment
https://www.sau.com.au/forums/topic/174100-so-and-so/#findComment-3196761
Share on other sites

We're you there to check the car out in person? Wouldn't you have been able to see what was wrong with the car? I'm not trying to be a dickhead, but the only person you can blame is yourself. You should've checked out the car properly.

If you had put a deposit on an ordered car or something and they gave you this car, forget what I said above.

I agree...

Dont wanna sound harsh but alot of them things could be spotted easily (turbo exempt). I mean, surely the paint didnt look mint for two weeks then all of a sudden decided to flake.

...unless u got it imported from overseas urself and couldnt check it in person; then thats some bad shyte. ;)

Link to comment
https://www.sau.com.au/forums/topic/174100-so-and-so/#findComment-3196798
Share on other sites

All i ask is did you do your research before handing over the $$$$$'s for the purchase?

I have seen a few threads on SAU, painting this particular business as being a dodgy trader. All it would have taken was for you to either post up a "what do you think of this business" question, in the VIC forum, or even shoot a pm to a few regulars.

Some basic research, time and even money, for a professional inspection, would have saved you all the hassle and heart ache. Now your dream car has turned into a nightmare :yes:

Wish you all the best, but not sure what can be done now.

Link to comment
https://www.sau.com.au/forums/topic/174100-so-and-so/#findComment-3197148
Share on other sites

If what I said above sounded harsh, I'm sorry, I didn't mean it to come out the way it did. All I was trying to say was that if you had seen the car in person, it wouldn't have been hard to spot these problems.

Good luck with sorting eveything out anyway.

Link to comment
https://www.sau.com.au/forums/topic/174100-so-and-so/#findComment-3197203
Share on other sites

Look on the bright side, time for some big brakes, a bigger turbo, and a crazy paint job, and some new rims if they were :yes: stockies :P

But seriously if you can't get it sorted through them just cut your losses start the mod journey.

Link to comment
https://www.sau.com.au/forums/topic/174100-so-and-so/#findComment-3197297
Share on other sites

can only guess where you got it from but im pretty sure i know :)

i always recommend people stay away from them in particular... a mate didnt listen and ended up with a lebon... i mean lemon.

Bad luck dude... but yeah... should always get em checked out

Link to comment
https://www.sau.com.au/forums/topic/174100-so-and-so/#findComment-3197735
Share on other sites

Sorry to hear that mate, your hard earned $$$ to these scammers makes me furious..

i too have heard alot of dodgy stories about this "place", im guesing alot of people have.

They are known to perform backyard makeshift mechanics to pass a car off aesthetically appealing then you drive out the driveway or 2 weeks later and the rubber bands holding your bodykit snap etc.

I nearly got conned on a car from another import dealer in that same area....luckily i checked over the engine bay and found the compliance plate had been drilled off, they had a manfucaturers plate that looks similar to the compliance in the same location to try and pass it off. Real dodgy.

best advice is to steer clear from these dodgy c**t import dealers, if u do decide to buy one from em get a full inspect and comb over every inch of the car

Link to comment
https://www.sau.com.au/forums/topic/174100-so-and-so/#findComment-3197841
Share on other sites

y r u guys making out as if fabio has done something wrong, he bought a lemon from a workshop that cant be named which i think a lot of people would like to know so they dont buy from there or take precaution

I agree, its ridiculous that this site tries to protect the (seemingly) corrupt.

If someone has a bad experience they should let others know, just like if they have a good experience.

Any legitimate car dealerships would prefer this as they would get the business they deserve for being legitimate.

Link to comment
https://www.sau.com.au/forums/topic/174100-so-and-so/#findComment-3198223
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • All the schemas I can see, indicate your typical setup of ATF 'cooler' (read: heat exchanger) in the bottom radiator tank..ie; https://nissan.epc-data.com/stagea/wgnc34/5413-rb25det/engine/214/ ...but I can prattle on a bit here. These trannies have a thermistor in the sump ~ the TCU reads this and 1. bumps the line pressure up when the ATF is 'cold' and 2. prevents the TC lockup clutch from operating, until the ATF comes up to minimum operating temp (keeps the ATF 'churning' through the TC so it heats up quicker) -- trigger point is around 55C. In these conditions, the engine coolant temperature rises faster than the ATF temperature, and also helps heat the ATF up, which is why it's best to think of the in radiator tank setup as a heat exchanger ; the heat can flow in both directions... ...with these trannies, the 'hot' ATF comes out the front banjo bolt, flows through the cooler/heat exchanger, and returns to the box  via the rear banjo bolt. This gets a mention, due to the wildly different opinions wrt running auto trans fluid coolers ~ do you bypass the in radiator tank altogether, or put the cooler inline with the in radiator tank system...and then, do you put the additional cooler before of after the in radiator tank system?... ....fact is the nominal engine operating temp (roughly 75C), happens to be the ideal temperature for the ATF used in these trannies as well (no surprises there), so for the in radiator tank system to actually 'cool' the ATF, the ATF temp has to be hotter than that...lets say 100C -- you've got 25C of 'excess' heat, (slowly) pumping into the 75C coolant. This part of the equation changes drastically, when you've got 100C ATF flowing through an air cooled radiator ; you can move a lot more excess heat, faster ~ it is possible to cool the ATF 'too much' as it were...(climate matters a lot)... ...in an 'ideal' setup, what you're really trying to control here, is flash heating of the ATF, primarily produced by the TC interface. In a perfect world, wrt auto trans oil cooling, you want a dedicated trans cooler with builtin thermostatic valving - they exist. These should be run inline and before the in radiator tank system ~ when 'cold' the valving bypasses the fin stack, allowing the ATF to flow direct to the in radiator tank heat exchanger, so it works 'as intended' with helping heat the ATF up. When 'hot' (iirc it was 50C threshold), the valving shuts forcing the ATF through the cooler fin stack, and onto the in radiator tank heat exchanger...and you sort of think of it as a 'thermal conditioner' of sorts...ie; if you did cool your ATF down to 65C, the coolant will add a little heat, otherwise it works as intended... ...the 'hot' ATF coming from the front bango bolt, is instantiated from the TC when in use, so all/any flash heated oil, flows to the fluid-to-air cooler first, and because of the greater heat differential, you can get rid of this heat fast. Just how big (BTU/h) this cooler needs to be to effectively dissipate this TC flash heat, is the charm...too many variables to discuss here, but I just wanted to point out the nitty-gritty of automatic trans fluid coolers ~ they're a different beastie to what most ppl think of when considering an 'oil cooler'... /3.5cents   
    • Been a busy but productive day. Axle and hubs acquired. All fitted up after a bit of modifying. Need to sort out wider mudguards and running light reflector covers but other than that the trailer is gooood to go !!
    • Selling a SMIC for a Nissan Stagea C34 Series 2 and the pipe from the intercooler to inlet. (I believe it is the same R34 GTT, please correct me if I'm wrong) Price: $50? I dont have a photo of the big black pipe that goes from SMIC outlet to throttle body.
    • So the original radiator is leaking now. Looking at getting a fully aluminium one next. Am I correct in saying that the Series 2 Auto Stageas have a separate trans cooler from factory (located in between the rad and intercooler in my previous post/message).   Currently looking at Fenix $460, Blitz $700, GReddy $800, and KoyoRad $740. What are everyones thought on Fenix ( ive read a few comments saying theyre cheap Chinese rebrands etc and how their build quality is... well.. chinese...)  compared to the others? Worth the extra couple hundies?
×
×
  • Create New...