Jump to content
SAU Community

Recommended Posts

ok, one of our headlights only lights up when it feels like it, but if you beep the horn, usually it will come on?

what would cause that?

also, car has 150k with original coil packs, had iridium plugs that have caused no problem for 50k at 200 odd rwkw

car has just started randomly hesitating, usually at cruise, havent seen it do it at high rpm yet

time to start looking for replacement coilpacks? or could it be something else

nothing has changed on car in 20k

Edited by Spook's_Skyline
Link to comment
https://www.sau.com.au/forums/topic/174151-diagnose-this-x-2/
Share on other sites

ok, update

car just completely died on me

went from small heistation to massive stutter to stalling immediatley

turn key on, engine revs just drop to stall immediately

let it sit for 1 minute and was able to limp car home

damn, first time shes ever let me down :yes:

i had the same problem with my headlight, mine wouldnt work, then when i slammed the door it would work..

it ended up dieing and not working at all so i went on a hunt to find out why and it wasnt getting any power so instead of stripping the loom really far back i did the dodgey and hooked it up to my parkers... seriously who drives around with only parkers on anyway haha :(

ok, bit more info about the hesitation/dying

cars been at shop for the last two days

of course when its in shop, behaves perfectly, no dramas at all

had diagnostic guy come out and check everything, no faults, coils look ok

mechanic seems to think that afm mite be faulty?

problem has only ever occurred at light load, not on boost

cruising at 110 on highway, and then cruising at 60km/h the other nite

im looking at changing my afm to a bosch z32 anyway, so mite give that a try

fuel pump is a reasonably new walbro, probably 12 months old

havent had any issues with it that i know of since install

i am watching the pfc hc whenever we drive anywhere now to see if something funny happens with the afm reading when this occurs

Edited by Spook's_Skyline

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Well, this is probably where a wiring diagram and a multimeter come into play.
    • I can say to anyone thats doing this; having done a number of R clusters; just be careful if its an unknown cluster.  It takes a bit of force to pull up; but if it feels excessive then its probably stuck. I've had this and pulled the entire hair spring out; and I can tell you; its not easy getting the correct spring replacement with the correct inner diameter and winding. In my case someone had used some sort of adhesive to stick it to the spindle and it pulled the whole spindle out; which the force seperated the hairspring from the spindal and caused it to deform.  You may have to clean it (IPA); or in my case if i'd known i should have used some sort of solvent on it.  Also check out Cruizin Central on eBay. He does all sorts of dials; and you can email him with any custom designs you want. So if you want like certain logos etc...he'll send you a mock of what it will look like then you accept the order and he'll take care of the rest. Fantastic dials and he can do basically any design you want. 
    • Have you confirmed its the actual axles? Also the wheel bearings that mount on the hubs to hold the axles wear out. I replaced mine as they got play in them. It sorted my play issue. 
    • Ive converted a few clusters for the R33 with 320km/h dials. On the back there are some pads which can be bridged or unbridged (using solder or wick braid) to calibrate it. There is one bridge which is for MPH <> KPH; and there are combinations of bridges to offset it. There is probably a diagram  For example; this is my conversion for a 180km/h dial to a 320km/h dial (I put custom GT-R dials on it with the GTS25t layout) If you have J2 soldered (assuming the S clusters have a similar config to the R clusters); you may need to remove that solder
    • Back on topic 😉, these are some of the notable pages from the booklets that are supplied with each weekly parts update. I never knew the BNR32 test mule car had an S13 Silvia front end... *Edit: On closer inspection the test car still had the R32 body, but only the front end had Silvia panels etc.
×
×
  • Create New...