Jump to content
SAU Community

Recommended Posts

Was having a disagreement with a mate on the w/e, i said that a 34 GTR front bar would not fit onto a Gt-t as GTR has a wider wheelbase & fenders. He reckons it does and has seen it done before. Can anyone confirm that for me? Im after answers from someone who has experience in this or done it themselves and not just a guess or wot they've heard from a friend of a friend.

We both agree that a GTR/aftermarket bonnet will be required for a GTR front bar.

Edited by G_Force
Link to comment
https://www.sau.com.au/forums/topic/174159-gtr-front-bar-on-a-gt-t/
Share on other sites

GTR34 front bar will not fit gt-t as it need the wider GTR guards. your mate was wrong.

GTR34 bonnet will fit gt-t along with GTR lock assembly and hinges. you do not need the whole GTR front end. Yes I have done it before.

Did you end up getting the Top secret bar front GTautostyle?

Cheers

GTR34 front bar will not fit gt-t as it need the wider GTR guards. your mate was wrong.

GTR34 bonnet will fit gt-t along with GTR lock assembly and hinges. you do not need the whole GTR front end. Yes I have done it before.

Did you end up getting the Top secret bar front GTautostyle?

Cheers

Thanks for that Forged, i knew the GTR had wider fenders. As for the Top Secret, still doing some research. Went on the GT Autostyle site and only front bar listed for a 34 there looks like a C-West one, its somewot similar to a Top Secret tho. See link.

http://www.gtautostyle.com/nissan/R34/cwest_f.jpg

I might have to email them for more info on the Top Secret one ur talking bout.

I was also hoping i could find that bottom lip they have on the Top Secret GTR, no luck so far unless one is willing to pay an arm for the real CF one. If anyone hears of where i can get this bottom lip to fit a Gt-t please pm me.

Here's a pic just in case anyones wondering wot im talking about.

post-25499-1182818905_thumb.jpg

the 34 on their website has c-west side skirts but definitely gtr style front bar not c-west.

the bottom lip is the only omission there. i dont know anyone who sells those neither. forget carbon fibre tho way too costly. try bodyform or jetspeed, if you got the bar their could probably custom make a similar lip for you.

cheers

the 34 on their website has c-west side skirts but definitely gtr style front bar not c-west.

the bottom lip is the only omission there. i dont know anyone who sells those neither. forget carbon fibre tho way too costly. try bodyform or jetspeed, if you got the bar their could probably custom make a similar lip for you.

cheers

Those side skirts look like Bomex to me.

Cool so that is the Top Secret front bar, thought it looked very similar. Yea might hav to get that bottom lip custom made.

Reckon those side skirts go with that front bar? How bout the rear bar, any idea wot would go with the Top Secret front?

honestly I don't think those side skirts match the trust front bar at all.

I went with Impul side skirts. reckless garage in Japan had a GT-T with Trust front bar, Impul skirts and rear bar when they first came out, looked very neat. I can try to dig up some pics for ya.

also more pics of the setup when my car is done.

honestly I don't think those side skirts match the trust front bar at all.

I went with Impul side skirts. reckless garage in Japan had a GT-T with Trust front bar, Impul skirts and rear bar when they first came out, looked very neat. I can try to dig up some pics for ya.

also more pics of the setup when my car is done.

U mean Top Secret, not Trust?? Yea if u find some pics of Impul skirts & rears, pm or post em.

Cheers

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The 1000ccs are side feeds but they're not currently installed, had my old factory ones in for leak testing purposes, only decided on them because front facing plenums and good top feed rail kits are out of my budget at the moment, are they really that problematic? Had a set of yellow jackets that lasted me 5 years, no real issues, only replaced them chasing this misfire issue that ended up not being ignition related 😄  
    • Are those 1000cc side feeds? If so, that's part of your problem. I have 1480cc and they idle at stoich on 98RON, and all the way to E85. Also your coil packs.....
    • Update for the sake of closure   Ended up getting the intercooler piping all sorted, new plugs and yellow jacket coils, and she was idling mint until it warmed up while I was bleeding the cooling system. Found the misfire to be localised to cyl 3 by unplugging coilpacks, ran a compression test, that checked out, then decided to get a mate to check if that spark plug was firing out of the motor. Upon cranking it over, with the injectors disconnected, the car actually fired and ran on a couple cylinders and heaps of fuel came out the top of cyl 3 I'd say that injector's either spraying incorrectly or spraying far too much, which is fine as I'm planning on replacing them anyway I'm planning on making about 250kW on flex fuel, and have a set of 1000cc injectors from ozautosport, obviously overkill but I'm planning on building the motor and running more boost further down the line, do you reckon they'd be too big for a smooth idle on 98? Thanks for the replies gents, much appreciated
    • I'm confused. You said you want to "remove the clear coat from most panels" but it sounds like you are actually doing a full respray? Few random things to add -  If you chase the blistered paint with 120 grit, I can almost guarantee you'll chase it down to bare metal (that's fine). But if you paint the car from here, you'll have nice little indents where ever the blistered paint was. The new paint won't magically level out the low areas, you need to fill them. Which leads me to the main point I wanted to add, make sure the whole car is flat before you paint it. All those areas with blistered paint you sanded out, make sure to fill them and triple check they are flat with a block guide coat. I'd also check the whole car is flat with a large block and guide coat but yeah up to you if you want to go that far.   
×
×
  • Create New...