Jump to content
SAU Community

Recommended Posts

hey guys my r33 is sick and i dont mean fully..

its had a misfire at about 4500rpm for bout two weeks

but now it is doin a similar thing off boost from idle to about 300rpm

has new ngk iridiums about 2000kms old

what is it..

coilpacks??

afm??

fuel pump??

spark plugs??

Link to comment
https://www.sau.com.au/forums/topic/174585-whats-going-on/
Share on other sites

evil weevil, when you say hitting a wall do you mean you'd push the accelerator and then all of a sudderen it would miss and sputter and the car would go no where...... like hitting a wall :S if so i think im having the same problem with fuel pump which may also lead to a few of my others problems.....

http://www.skylinesaustralia.com/forums/in...p;#entry3195774

Sorry to hi jack your thread sleepy33

Link to comment
https://www.sau.com.au/forums/topic/174585-whats-going-on/#findComment-3203428
Share on other sites

Yeah thats basically it mate!

Id give it a hit/take off - and yes, it would start to go and then all ofa sudden, nothing, Id back off and gently gently ease on throttle and would go agai, but run like shit.

Around same time I was at WSID and on gear changes it was splat and splurr everywhere and I could only manage 14.7 @ 97 on all 4 runs

Took it to uni group and turnsout that with my old Fuel cut defender and standard pump, the pump was almot dead and my car was leaning out in a major way.

Had a quick read through your other thread,

Sounds like you have what I had - get a new pump and see how you go or some how test the current one?

Link to comment
https://www.sau.com.au/forums/topic/174585-whats-going-on/#findComment-3203586
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • MR HAMMER has said his piece. Painted up to avoid Rusty Rusty. Actually lines up well. (i.e it lines up the same as the unmolested GTR guard). Turns out the GTR Strut brace does foul on the bonnet vents ever so slightly. May need a little bendy bendy if intended to keep using with a strut brace. So spacing it out to clear the FAST102 is not an option. Annoyingly, the bonnet vents also foul on the heater lines running over the engine. Given this engine does not EVER require a heater, a delete loop is going to be used. Don't worry, the defogger uses the AC. The heater is basically "Do not use the aircon and turn the fan on". It will still be effective, I promise.... once I get the system regassed... Will have to revisit with unvented bonnet I suppose, and suitable strut brace. There's plans to do this and other things tonight and bleed brakes (there was a weep) and put the bumper back on, and take Good Friday morning - Because troubleshooting on the side of the road limping it home at midnight tonight is ... not very smart.
    • Thank you all for you assistance. I contacted Nistune regarding the support for the RB20DE along with my ECU Code (23710-10U00). They do have a map for it and added the RB20DE as a purchasable option now as well. They also added Malta as a Billing and Delivery options as this was missing. I was honestly amazed at their quick response and action, it took less than 24 hours. I also looked again at direct fit options for injectors, just in case I were to replace them. DeatschWerks seem to use a Bosch EV14 base and makes ones that fit mine at 440cc lowest, but also have 550cc at the same price. I tried looking for other direct fit options and managed to find one (also Bosch EV14 based) which includes a plug and play adapter on ebay. Did a small test with a Noid Light on the troubled injectors and all seems good, so they are pulsing properly electrically. One weird part is that they are missing on the same two cylinders as before I got the injectors cleaned. Mechanic also found this weird as he did not label the injectors and it is unlikely to have the faulty injectors be installed in the same cylinders.  
    • Nice, let me know how you find the 98 tune
    • Put a hand on an injector and see if that's what the buzzing is. You might be triggering the injectors by moving off idle command.
    • Ah, should have been clearer. Currently has a flex sensor installed all good to go.    like u mentioned, I’ve only ever known the car on e85, I might hate 98, but I have to try it out first. Everyone says the -5 turbos get pretty laggy on 98 octane tho…
×
×
  • Create New...