Jump to content
SAU Community

Recommended Posts

id like both brake and clutch lines, if you cant get brake im in for the clutch

pm me the details if your taking payments

thanks

edit: its for an r33 gtst if that makes any difference

Edited by tek_01
  • Replies 97
  • Created
  • Last Reply

Top Posters In This Topic

id like both brake and clutch lines, if you cant get brake im in for the clutch

pm me the details if your taking payments

thanks

edit: its for an r33 gtst if that makes any difference

all together now!

want brake lines more but will go both if you can organise it :blink:

Yes ready to fit. Heat sleeve is to protect it. Not sure if it's needed but it sure wont hurt. UK, hmm I will look into that. Yes it's turning into both clutch and brake. I've been so bloody busy lately sorry everyone.

I'm in for both brake and clutch lines for R32 GTR - Let me know the final price when you know.

Cheers

Michele

Edited by LadyBytes

Ok got the brake lines details:

Goodridge lines ADR approved, anti wip and no rubber like other brands on joins which perrish with heat. Bolts straight on, made in England and quality product. Exact same as V8 Supercars use.

5 or more sets $195 each set of 4 instead of $260 Freight and handling anywhere in Australia $15

I'll now update the first post and get this thing happening.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Hey lads, reviving an old thread.  As an update, since the last time replied to this thread, ive done mostly suspension. Havent touched the motor except for maintenance. Though upon changing spark plugs, found out i had splitfires pre-installed! Updates: - Got me some stock airbox top cover and snorkel to fit onto the original intake. Should be free of defects - Bought a set of R34 GT-T brakes (not installed yet, going to rebuild + respray in champion blue + white 'Nissan' text) - Bought the last set of bilsteins from @Sydneykid and had them installed. Has been making some sounds on the rear but hopefully should be sorted out after this New Year break. - Regreased front caster rod bushings (poly bushes..) - Rear upper camber arms - Whiteline sway bars (BNF27Z 22mm + BNR11XXZ 24mm).  The rear sway bars are a bit short (ive read 50mm else where) but was still able to get them in.  Anyhows, I reckon suspension is sorted now. Maybe replace bushes (do have a set of front upper control arms from SK not installed yet) but should be okay for now. From now, I'm wanting to start working on the motor, drivetrain etc etc. Still debating on the order to go on and what to buy etc but: - ECU ( Haltech or Link ( Link states that it dont support A/T or AWD functions... Can anyone attest to this? ) - Highflow turbo ( ATR43ss2 ) - Intercooler ( Not decided yet, but cant find many good afoordable ones. Toshi says to opt for crossflow Japanese. Bit difficult this one, unless I get a returnflow Blitz from JJ? ) - Injectors ( Any recommendations ? I do have a nismo FPR ( Thanks SK ) ) - Seats - Tune by either Toshi or DVS To be fair, I did consider just keeping the stock turbo and nistuning it. Sat in a mates stock N, that had something like 200kw, and I reckon that felt more than enough. Maybe I should just go this route ahhaha. Too many choices.... Planning a trip down south, so wanting to just clean things up and make sure it gets to and from in one piece. Anything else specifically I should do before ? Cheers lads  
    • Must be for the car’s lucky charm 🤷🏽‍♂️ She runs fine, but it just seems to take about 1L less. Maybe I’ll have the oil sump dropped at some point to check if there is anything 
    • Hmmm interesting. Mine is the exact same and clearly the right one.  The mystery of the engine oil being full after 3.5-4L continues 
    • Yes I as well would like to find out where I could get some of the seat material with the red or blue small squares in it
×
×
  • Create New...