Jump to content
SAU Community

Recommended Posts

So I get up this morning, run out to have a look at my car's fluid levels and this is what I find:

P1020307.jpg

P1020309.jpg

P1020310.jpg

Whats that? Thats my beagle's dog food under the hood of my car! How did it get there? Well I first thought it was birds...but then one piece of information solved the case for me:

P1020308.jpg

Thats Rat Poo!!!! Some how the rat(s) decided that they would hide the food in the RB25DET housing and then decide to mark their territory by leaving shit all over the engine!! Man, im soo mad!!!!! :D

I have thought about different ways to kill the rats - right now I placed rat poison out there. I have to buy more later on. If that doesnt work, Im thinking of calling the pest control. But eventually we will demolish this house anyway, so that will mean a violent end to the lives of the rat(s).

Has anyone else had this problem? How did you get rid of these little bastards??

Link to comment
https://www.sau.com.au/forums/topic/174875-has-anyone-else-had-this-problem/
Share on other sites

that's pretty f#cked up

where were you going to put the rat bait?

is the car parked in a garage?

reason why i ask, is because at my work we get ALOT of labradors and beagles that come in bcoz they ate rat bait (beagles as you might know will eat anything)

so obviously make sure your dog can't get to the rat bait

what the......

thats the most random strange thing ive heard/seen in a while.....lol

chuck some of the rat poison on top of you motor at night since that seems to be the place they like to go. Just remember to remove it again before driving it....:D

We are in the process of cleaning out stuff for the hard rubbish collection (cleaned out the garage for the new car), so I have put the rat bait in a place where my beagle cant get to it....i suspect the rats might come from other houses....but cant be too sure. I traced more rat poo at hte edge of the carport/garage. There is no rat poo in the garage, so its probably somewhere outside.

And no ash - do not live in the ghettos....didnt even know there are ghettos in Vic :D

Oh....and i hope those bastards were hiding in my exhaust system, cos I had to take my car on the fwy today :P

Sooo which is the rat shit??? the potatoe gem looka likes or the stuff in the last pic cause if its the potatoe gems, man .... thats some big muthafooken rats !!!! I would get a damn gun licence and :D those rat fooks

LOL

man, i do Pest Control for a living *waits for laughs*... its good f**king money hence it funded my R32 project.

theres plenty of ways to get rid of them.. whether i use a single wax block baiting option or go for the full horns and bait the dog food with a poison dust(make sure your dog is inside for a day or two while they go to it) then they will never come back again.

shoot me a PM if you want some work done, ill do half price for SAU and NS members :D

cheers

Josh

oh and btw, and this is no sales pitch, commerical rat baits DO NOT WORK... all you will find in them is basically salt and additives. which does nothing. the stuff i use will knock them out in one single dose and they will die off within a week :P

Edited by 180sxdrifterj

hahaahaahah that has to be the funniest shit i've seen all week. good thing you looked under the hood b4 heading out man. might have never gotten rid of the cooked dogfood smell. and yea like said above be careful putting poison around. even if the dog cant get to it make sure its nowhere near his food, water or that it cant be moved. also seal his food up a little tighter - make it harder for them to get in

LOL

man, i do Pest Control for a living *waits for laughs*... its good f**king money hence it funded my R32 project.

theres plenty of ways to get rid of them.. whether i use a single wax block baiting option or go for the full horns and bait the dog food with a poison dust(make sure your dog is inside for a day or two while they go to it) then they will never come back again.

shoot me a PM if you want some work done, ill do half price for SAU and NS members :D

cheers

Josh

oh and btw, and this is no sales pitch, commerical rat baits DO NOT WORK... all you will find in them is basically salt and additives. which does nothing. the stuff i use will knock them out in one single dose and they will die off within a week ;)

I might take your offer man....but will have to wait and see. Because our house is old, one of those rodents did manage to get into our house. I spotted him running around the lounge while watching knight rider. It saw me. I saw it. Eye contact was made. It ran in one direction, I ran in the other direction. We killed it though with the poison - hasnt set foot in the lounge in a while. It takes about 7 days to die or something.

Oh and we got possums as well in the roof. :P

hahaahaahah that has to be the funniest shit i've seen all week. good thing you looked under the hood b4 heading out man. might have never gotten rid of the cooked dogfood smell. and yea like said above be careful putting poison around. even if the dog cant get to it make sure its nowhere near his food, water or that it cant be moved. also seal his food up a little tighter - make it harder for them to get in

Yeah, im not leaving his dog food outside at night anymore. They can go hunt for their own damn food....spence's dog food costs me quite a bit already..... I aint feeding rats too. Actually, this could be the reason why his front paw is still infected....should call the vet tommorrow and find out.

Just wondering lol.

It was more a comical post than a serious one :P

Ah...now it makes sense lol - my sis-in-law was saying that mt waverley and glen waverley are infested with rats or something.....but i cant see why that would be the case as the areas are pretty clean.

4drftn - yeah....we will see what happens this next week. I put the rat poison out there, hopefully with the beagle's acute sense of smell i would be able to track down some dead rodents in the next few days........If not, looks like Josh might have to make a visit to kill these buggers :D

Sooo which is the rat shit??? the potatoe gem looka likes or the stuff in the last pic cause if its the potatoe gems, man .... thats some big muthafooken rats !!!! I would get a damn gun licence and :D those rat fooks

its the brown/black shit in the last pic that is the real rodent shit......the other stuff is dog food. And yeah, if the "potato gem" look alike was rat poo...im packing my bags and leaving this suburb man lol

That sucks!!

Had a work mate, who lived near Emerald area and his neighbor had to get his 4 month old new car re-wired as a rat had used the wires and heat padding, in the engine bay, to make a nest. :P

How much did it cost to get his new car rewired btw? Wouldnt want that happening to us now as we just picked up the mazda from the dealership on friday.

Maybe the rats like the RB25 engine........but it also explains why me and my bro found a rotting apple core in the honda accord when we went to give it in for trade in....

I spotted him running around the lounge while watching knight rider. It saw me. I saw it. Eye contact was made. It ran in one direction, I ran in the other direction.
if the "potato gem" look alike was rat poo...im packing my bags and leaving this suburb man lol

Emsta Thats some funny shit man, I think I laughed for at least 5mins straight, great post ....... :D

Edited by immortal^

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Update: I got the magnet out. I bought 3 different flexible magnetic reach tools, but none of them worked. The magnet on the tip was all less than 2lbs of force, so i had to buy a special cylindrical magnet that had a pull force of 9lbs.  The magnet finally came in the mail yesterday, so i got under the car to get to work. The super strong magnet isn't that long, so i only have about 1 finger pinch lengths to hold it. I was so scared when i was going in the hole, that the 9lb magnet would just fly away inside the oil pan never to be seen again, but i had my butt cheeks clenched and finger gripped on that thing so tight, i managed to get it to suck the other magnet out.  It was a victory for me last night.         
    • Yep, pretty much what you said is a good summary. The aftermarket thing just attached to the rim, then has two lines out to valve stems, one to inner wheel, one to outer wheel. Some of the systems even start to air up as you head towards highway speed. IE, you're in the logging tracks, then as speeds increase it knows you're on tarmac and airs up so the driver doesn't even have to remember. I bet the ones that need driver intervention to air up end up seeing a lot more tyre wear from "forest pressures" in use on the highway!
    • Yes, but you need to do these type certifications for tuning parts. That is the absurd part here. Meaning tuning parts are very costly (generally speaking) as well as the technical test documentation for say a turbo swap with more power. It just makes modifying everything crazy expensive and complicated. That bracket has been lost in translation many years ago I assume, it was not there.
    • Hahaha, yeah.... not what you'd call a tamper-proof design.... but yes, with the truck setup, the lines are always connected, but typically they sit just inside the plane of the rear metal mudguards, so if you clear the guards you clear the lines as well. Not rogue 4WD tracks with tree branches and bushes everywhere, ready to hook-up an air hose. You can do it externally like a mod, but dedicated setups air-pressurize the undriven hubs, and on driven axles you can do the same thing, or pressurize the axles (lots of designs out there for this idea)... https://www.trtaustralia.com.au/traction-air-cti-system/  for example.... ..the trouble I've got here... wrt the bimmer ad... is the last bit...they don't want to show it spinning, do they.... give all the illusion that things are moving...but no...and what the hell tyre profile is that?...25??? ...far kernel, rims would be dead inside 10klms on most roads around here.... 馃槂
    • You're just describing how type certification works. Personally I would be shocked to discover that catalytic converter is not in the stock mounting position. Is there a bracket on the transfer case holding the catalytic converter and front pipe together? If so, it should be in stock position. 
  • Create New...