Jump to content
SAU Community

Recommended Posts

18000 is cheap for a 300kw gtr I will also consider swaps.


So here it is,
It's an R32 GTR, I am the first Aussie owner as I imported it myself.

Mods:
GT35r twin bb turbo bought new from horsepowerinabox.com ( with turbo bag)
Stainless exhaust manifold
HKS 50mm external wastegate (screamer to atmosphere) Exhaust is now legal plumbed in with high flow stainless cat.
Apexi power fc de-jetro (map sensor not afm) with hand controller
4 inch inlet pipe to a 9 by 4 inch air filter fitted behind front bar vents (not in engine bay)
Adjustable HKS cam gears with new blue timing belt, gears have not been adjusted.
650cc injectors
Ceramic coated inlet manifold
4 inch cooler (not installed)
Front mounted ARC oil cooler ( fits where grill goes)
Fully adjustable pillow top ball joint suspension
Adjustable upper rear camber arms
Stainless Exhaust cat back
18 inch 5 spoke white Enkei rims, Excellent front rubber, rear not so good.
HKS evc3 boost controller,
800hp single plate clutch.
340kph dash
Rear hicas has been removed with a lock bar in place.
Sony cd player with AUX front plug for ipod with remote.

The car has 12 months rego on it, the clutch is only 5000kms old as is the gearbox ( gearbox with no reverse included if need be).
I have owned the car for about 3 years now and barely find time to drive it.
The car has been dynoed on a basic tune to 301.7 rwkws on 16psi, it has not been run at any higher boost levels. It is currently running on 10psi.

The condition of the car is quite good considering its age, there are a couple of scratch marks on the car id say from car parks, front passenger side on the bar and rear guard. The paint on the bonnet seems to have to no clear left on it, which is how it arrived from Japan.
When I purchased the car from Japan I was told the engine had been built with forged pistons and had some head work, but as I have not opened the motor I dont know for sure.

I am open to offers as I realise there is no chance of getting the money I have spent on it back.

rego: ATN48W
[removed]

post-21954-1183266092_thumb.jpg

post-21954-1183266298_thumb.jpg

post-21954-1183266223_thumb.jpg

post-21954-1183266357_thumb.jpg


Or swap

Link to comment
https://www.sau.com.au/forums/topic/174877-r32-gtr-single-turbo/
Share on other sites

  • Replies 76
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

nice car mate, i have seen this car cruising my area on numerous occasions. sounds tough as and looks the goods when cruising, best of luck selling it mate! cheers Garth

nice car mate, i have seen this car cruising my area on numerous occasions. sounds tough as and looks the goods when cruising, best of luck selling it mate! cheers Garth

Thanks champ, yeah I havnt seen your ride for a while now.

yeah my gtr is in the build, spoke to the machine shop today, my head is done... shall be on the road soon. hopefully u still have yours, we will have to cruise it up together! best of luck with your sale, nicest 32 ive seen ni awhile and tough street look...

Best of luck with it mate! you should have no worries selling it!

Garth

For sure Garth im in, if it doesnt sell. You could always buy it and have 2??? eh eh eh...nudge nudge.

Thanks Chris, I dont really want to sell it but its got to go.

Love this car, im just a bit short, might be in the market at the end of the year. Hopefully a car setup like this will be ready to take its place in my garage then GOODLUCK!

Not interested in a drift style setup S2 r33 gtst at all? thought id ask anyway..

  • 3 weeks later...
  • 2 weeks later...

hey thanks Andrew, looks like I wont be selling it. no one wants it, its in car point for 20 now...easy way to blow 40gs eh

Dude give me a call we gotta drink cans.....

Turbo conversion done by adriano sau member, all tunning done by DAT Dumah Auto Technics (02 43898111)

Cant remember suspension brand its pillow top ball joints though.

Hey mate very nice ride indeed.. ive got a gtst which im tryin to sell at the moment and then as soon as thats gone i will be gettin a bank loan for the extra cash.. if this is still for sale when ive sold mine and got the loan then i may be very interested.. how much lag does it have with the single or just at what rpm does it hit full boost?

Hey mate very nice ride indeed.. ive got a gtst which im tryin to sell at the moment and then as soon as thats gone i will be gettin a bank loan for the extra cash.. if this is still for sale when ive sold mine and got the loan then i may be very interested.. how much lag does it have with the single or just at what rpm does it hit full boost?

It comes on full boost around 4.

how does this 4 grand boost compare to stock??? how much laggier???

Im pretty sure full boost on a stocker should come on around 3250-3500 so doesnt seem too much laggier

Im pretty sure full boost on a stocker should come on around 3250-3500 so doesnt seem too much laggier

Its around the same as when it had the twins.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I'm not sure the diode only will give the desired result. I'd probably approach it with a couple of relays (And you still might need a diode too!). You need to be able to break the constant feed from the headlight to the orange corner globe when the indicator is flashing. Not knowing which Skyline we're talking about specifically here too (And it may not matter, but I don't know the R34 column switches) you'd likely need to rewire the stalk, so that the indicator power itself no longer runs through the stalk too, as now you need it able to trigger a relay that will break the constant supply from the headlights to the indicator, then you'll need a separate relay to trigger the indicators to come on (Replacing the internal action of the indicator stalk).
    • Weird story from me My Toyota 86 was with Commbank comprehensive but for market value (who they use to underwrite is unknown) When I munted it beyond financially viable repair in 2020, rear end smashed in to the point it bent the rear quarter and roof, they knew I paid $31k cash for it because I told them, they still paid me out $38k, as all the 2017 limited edition variants with typical Km and condition were going for between $36-41k, so they did weird math and came up with $38k I never officially mentioned any of the mods that I had done, but as they were not the cause of the crash they were not fussed at all, the insurance inspector actually asked if I wanted to replace all the mods with the OEM stuff if I still had it laying around before they took the car I still came out of it behind though, because I had probably dropped $20k in it with the suspension (bent after the prang), wheels (bent as well) and "other" mods, that the inspector asked about But still, as the market value was higher than what I initially paid, and they paid out market value To say I was surprised with the outcome would be an understatement  Weird, but true, but probably just lucky with the inspector on the day I guess  Sadly, I don't think if I munted the old NC1 MX5 I would get the same result Meh, pay to play
    • Well, the car is back, all straight and shiny, for how long for is anyone's guess  After picking it up we went for a bit of a drive, Jebus I really enjoy driving this little thing, hopefully the weather let's us go for a nice long cruise this weekend as it will be out of my hands for at least a few days next week when it heads back into Mania on Monday It's weird, whilst I do always enjoy going for a drive, the NC makes me feel like a kid who has just got his first car, and they just want to drive wherever and whenever they can I really need to look into the MX5 Club of NSW
    • wow that is some seriously JDM original credibility there!
    • Selling hks rb25 cast manifold and waste gate.   Never going to use as don't have Rb powered car  Unknown condition of waste gate diaphragm  $900 Pick up only Ipswich Qld 
×
×
  • Create New...