Jump to content
SAU Community

Recommended Posts

hi guys

i recntly had some issues with my coil packs, my car was missing on hard excelleration, so i pulled the coils and painted them with nail polish as previously demonstrated on DIY. unfortunantley as some predicted due to the heat factor it didnt last so i pulled them back out and covered them with industrial silcone.

which wistands high temp, however problem is still there.

my question is, is it possible that my coils are that stuffed that they are no longer repairable, I would like to also add that the only reason why i reverted to painting them from the start was to boost more, and i never had an issue on stock boost.

i know i am going to have to get new coils sooner or latter but i would prefer to hold off on them for a while and perhaps i can get splitfire coils .

any help would be very much appreciated.

Link to comment
https://www.sau.com.au/forums/topic/174932-some-further-help-required-please/
Share on other sites

mate regap you plugs lower.....

and i had massive misfire problems, went to bunnings and grabbed some selleys 401 industrial strength silicone, can withstand heat upto 205 degrees. Cover the bottom of the coil where they crack in the silicon. I did this on the weekend and it worked an absolute treat. I found this from the diy section after lots of searching and it worked wonders (i think it even might be a few pages into that nail polish thread as i read tat aswell)

i know i am going to have to get new coils sooner or latter but i would prefer to hold off on them for a while and perhaps i can get splitfire coils .

any help would be very much appreciated.

they do degrade internally over time, and this is terminal. yours may well be past it. contact Slide for a good price on Splitfire coils :thumbsup:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I should note too as I have all 4 wheel speed inputs to the emtron I now have the emtron controlling the attessa solenoid for 4wd/traction and launch control strategies. 
    • It works quite well with the adjustibility within each of the programs of the turbolamik. Essentially p1 is drive and lockup comes on like a normal driver.  But in program 7 I have customised it to not request the lockup clutch to engage until something like 6500/7 when slip was the lowest. 
    • Yep, I like that. The tags are only on the first post of a thread and we don't get huge numbers of new threads. Also, I plan to add some more report types and we could have a member report type like 'review tags' then members could flag if they thought a topic wasn't tagged correctly.  No way man, I dig the input. Thanks! 
    • It's a valid thought. There's not exactly that functionality already (when creating a thread) - that's where the OP can use/create any tag they want. We'd have to come up with a way for the user to request their tags get reviewed or something. Otherwise the mods would have to review every new post's tags (for those that have them, anyway). There's kind of that functionality already exists to some extent, post facto of starting the thread, where the OP or any other user could report the post to admins, and request that tags get reviewed. We could do this already, and any user could already have made such a request. To make it a part of the forum proper, it would require an initial and an ongoing education programme, so that people know that it's a thing. OP based tagging/request for review would also require at least some (probably most) of the user base to be told that it's a thing they can do. Both of these things probably wouldn't spread too far and/or get used very much. If it was the standard approach on a lot of different sites, then it might do, because people would be used to it. Prank's approach to this differs from my original thought, by leaning into tagging. Which is fine - it's possibly better than what I originally suggested. In fact, I just went to the R32 GTR wiring diagram thread and added tags, including "Library". That's probably a good way to use tags and the idea of a library. We just have to drag together an (organised!) index of threads or posts that have that tag. I have yet to do any of my own follow up by pursuing worthy threads and posts and reporting/marking/tagging them for the library, such as the @Sydneykid stuff I was talking about, and possibly any amount of @Lithium 's and others' posts. At least if I tag them Library, we'll have a start.   Back to @Wazmond's idea as it relates to @PranK's, we might have some sort of a list of tags that are already used to scrape for this library. I'm not entirely sure how that would be presented or used, particularly if it got long. But it's yet another idea!   cheers
    • Just a thought, but instead of restricting, is it possible to do like an "up for review" kind of thing? Where say someone who's not an admin/mod tags, it would require approval for it to actually tag? User posts with a 'tag' > Admin/Mod Reviews > Approves tag > Tag now exists kinda thing? Just came across this thread so Im not too sure if Im straying off topic or not but forgive me if i am...
×
×
  • Create New...