Jump to content
SAU Community

Recommended Posts

So i got the rego renewal in the mail today for my Nissan pulsar.

480 dollars for 12 months! thats crazy it's a 1.8 litre engine and i'm paying 480 a year.

South Australia is the most rediculous state i've ever lived in. If i didn't like the place so much i'd leave.

Sure you can say if you don't want to pay leave.

But other states don't pay nearly as much as we do. And i can't really see where all the money goes.

I'm somewhat happy that i don't have my skyline anymore if i would have to pay more that 480.

Even my motorbike is about 480 a year and that think is only a 750.

Link to comment
https://www.sau.com.au/forums/topic/175056-registation-rant/
Share on other sites

if you pay 350 for 6 months that is redicolous

hmm i just looked up canberra (vic roads is down at the moment) and the pay even more than we do

0-975 $604.60

976 - 1154 $624.60

1155 - 1504 $652.60

1505 - 2504 $760.60

NSW

up to 975kg $213

976kg to 1154 kg $233

1155kg to 1504kg $262

1505kg to 2504kg $373

the first bit of info is in relation to weight in kilograms.

Edited by kralster

quit winging, yes the government is screwing us hard and dry, but my 04 triton dual cab 4x4 is high $800 a year.

yet full comp on it is $750 for a $32,000 car.

why is rego more then insurance?

wheres all our rego money going? its sure not being spent on the roads.

if regos to much for you then get a push bike.

Krastler, I'm fairly certain that in NSW the registration doesnt include compulsary third party and they have to get a "green slip" or "pink slip" or something on top of that. SA Rego is for registration and compulsory third party... unless you can shed some other light on this?

I think VIC may pay slightly less, but its economy of scale. You think of all the extra cars they have on their roads, and we have MORE roads to look after. Therefore to be able to drive from here to the borders, we have to cover greater distance per capita for road works. So if you want to drive on dirt tracks like in the 70's we can pay less :dry:

Krastler, I'm fairly certain that in NSW the registration doesnt include compulsary third party and they have to get a "green slip" or "pink slip" or something on top of that. SA Rego is for registration and compulsory third party... unless you can shed some other light on this?

I was going to post this very thing.

Yep, their "rego" seems cheap because they have to pay CTP separately.

our work van (Toyota Hiace) is $950 odd

have 2 of them, one is 2ys old and the other is around 7yrs old

ridiculous!

my stagea just came up as we speak - $658 for 12 months

my bike was over $500 for a .92Litre engine, now thats ridiculous!

Costs are eating up my wage, pretty depressed about the state of today's cost of living.

Health insurance is 3grand a year

Morgage is 11grand a year

Rego for 2 cars, plus insurance on 2 cars and house, is 4grand a year

Food budget is around 10grand a year for a family of 4 (2 adults 2 kids - actually I give the wife $800pm for shopping and her needs)

add in fuel, add in electricity, add in gas, add in phone and internet, and my wage doesnt cover it all.

Need to rely on the Govt. "family allowance" to help get by, and Ive been at my company for 10yrs almost, working fulltime for around 13yrs now........

Pretty sad state of affairs :dry:

So i got the rego renewal in the mail today for my Nissan pulsar.

480 dollars for 12 months! thats crazy it's a 1.8 litre engine and i'm paying 480 a year.

just paid $331 for 6months

its dear, but nothing u can do

pay it and forget about it (until the next 1 comes)

>_>

delete the whole thread it was going downhill from post #1

What?

I thought my first post was quite alright. I simply stated that i recieved rego renewal (which i'm sure every skyline owner on here has at some stage) and voiced my opinion that it was an exhobeoant amount to pay.

Next thing i hear is that i should shutup and not complain.

It seems like something that we should complain about given the state of roads in South Australia. And yes i'm aware that hardly any money from car registration is actually spent on roads. Roads are state and federal government funded mostly.

Like tangles said over 900 bucks a year for a work car.

Like tangles said over 900 bucks a year for a work car.

yeah, for a 4cylinder near-new (and one a few yrs older) work van (2 x toyota hiace)... crazy

sorry for my rant at the top of this page.... I just feel we seem to get at each others necks a bit too often here, in the sa section, sometimes.

just want you all to know I have NOTHING against any of you. far from it......

so there ya go. :worship:

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • f**kin' yikes! That insulation is the shittest stuff I have ever seen. You need to do an insurance job on that f**ker, pronto. WRT to the washer cover, I would have said that there'd have to be some at a wrecker, then remembered that it's a BMW, and reasoned that every single wrecked one would have been tailgating and so the front end would be trashed.
    • Oh and I lost my headlight washer jet cover!
    • Ok, so I got myself some X1 wheels really cheap to try out, they're a bit different and I like them but they're really narrow (18x8) they are available in staggered 18x8/9 also but really hard to find.  I kinda dig them, but not as much as the F10 19's I usually run, so these go into the wheel pile.         As I mentioned in another thread, I got a new exhaust. It's an off-the-shelf stainless one that fits OH-KAY. I don't love the tips size and how far they come out the back, I think I might cut the tips off and replace with some smaller (~3") ones that don't extend as far. It sounds really good though, I'm not sure if its just in my head but the car feels a little quicker, more responsive.      I fitted an eBay special front lip. Surprisingly it fit perfectly and all holes lined up. Its a little rickety but I haven't put any double sided tape on yet, I want to clean the front bar up where it has scraped the road a lot and fil in the number plate holes (or, get body coloured wrap to cover them - is this a thing?  I'm not sure if I'll leave it gloss or pain it matte. I really like it though, I don't particularly like the front bar without it, I don't really like the M-Sport and to get anything else is just too expensive. That said, I might need a new one now anyway as I dropped the car onto the jack after forgetting to put ramps under the front wheels. It bent a lot and while it did go back to normal after I got the car off the jack, I do fear I have not done it any favours.    Lastly, my headlights died. Different problems in each. They have gotten much dimmer over the past year or so, I put new (uber expensive) OSRAM bulbs in them but to no avail. One of them pointed at the ground and the other just kinda did its own thing with light working sometimes. Yeah, check this 18 year old BMW headlight wire. I reckon I know why they were stuffed.            BTW, the yellow and black is the power to the Xenons. Yikes. I hunted around an researched my options here. I would have loved to just get a replacement harness but not a thing. My car has adaptive headlights, that is they rotate left and right with the steering wheel. Good condition used adaptive xenons were over $700 each, non adaptive were around $400 each, but I couldn't help but think that they're all around 18 years old now, surely they'd have the same problems. So I looked at newer LCI headlights but they were even more expensive and I couldn't confirm that they'd be plug and play with lots of people having lots of opinions so not worth the risk.  I ended up getting brand new Chinese headlights from MARS. They're very close to OEM with only the angel eyes being a bit different. I didnt want crazy turn signals or sharp DRL's or anything. Not my bag.  They're not adaptive, I thought thats a feature I wouldn't really miss. So I coded that out.  The lights are awesome, they look so nice and they take so many years off the car. The angel eyes look great and the headlight brightness is ridiculous. I was so used to the old ones, I didn't realise just how bad they were. The new ones use the OEM bulbs, Xenon ballast and leveller motor which I was happier with. The only issue with them is that the rear cover is held on by SEVEN screws. This will be a nightmare to get to and open when I need to change bulbs.   
    • Now that you mention it I can see those too. More subtle. The lighting and low resolution makes it hard to assess super well what's going on but what is visible is bad enough to pull the motor.
    • I feel like this is due an update
×
×
  • Create New...