Jump to content
SAU Community

Complete Gtr Hks Piping Kit

berzerkled
 Share

Recommended Posts

berzerkled Contributor

berzerkled

Posted
Posted

I had plans of installing this kit onto my GTR, but have never gotten around to it and there's no point hanging onto it.

This is the complete HKS kit and includes everything in the photos below. It retails for $1400, I'm asking $700.

I can also include 2 Green HKS filters for an extra $100. Any questions, just let me know.

hks_pipes1.jpg

hks_pipes2.jpg

hks_pipes3.jpg

Link to comment
https://www.sau.com.au/forums/topic/175254-complete-gtr-hks-piping-kit/
Share on other sites
berzerkled Contributor

berzerkled

Posted
  • Author
Posted
gotta a pic of it fitted

I didn't install it, so I don't have a pic of it on my own car. I'm sure someone has the kit on here that you could take a look at.

It replaces all pipes on the turbo side as well as intercooler piping on both sides.

Scooby Veteran

Scooby

Posted
Posted (edited)

very interested, can you confirm all the bits line up correctly? looks the same as on the website but just want to make sure it hasn't been modified. where are you located? i'll take it pending confirmation and inspection.

Edited by Scooby
berzerkled Contributor

berzerkled

Posted
  • Author
Posted
can you directly fit an HKS intercooler to it as well?

I wouldn't imagine that would be any problem, as long as the outlets are the same size.

very interested, can you confirm all the bits line up correctly? looks the same as on the website but just want to make sure it hasn't been modified. where are you located? i'll take it pending confirmation and inspection.

They'll all line up perfectly, the guy I bought it from had it in his GTR and it's completly unmodified.

I'm in Canada, can I get your postal code and I'll figure out shipping?

Scooby Veteran

Scooby

Posted
Posted
They'll all line up perfectly, the guy I bought it from had it in his GTR and it's completly unmodified.

I'm in Canada, can I get your postal code and I'll figure out shipping?

Canada? That's interesting. My post code is 2619. To be honest I'm not keen on sending $700 to a complete stranger overseas. Is there anyone over here you could send it to on your behalf so I can see it before handing over the money? Or perhaps if you know one of the mods who can vouch for you? Nothing personal, I trust you understand where I'm coming from.

Regards

berzerkled Contributor

berzerkled

Posted
  • Author
Posted (edited)
Canada? That's interesting. My post code is 2619. To be honest I'm not keen on sending $700 to a complete stranger overseas. Is there anyone over here you could send it to on your behalf so I can see it before handing over the money? Or perhaps if you know one of the mods who can vouch for you? Nothing personal, I trust you understand where I'm coming from.

Regards

Hehe no worries. I own www.jdmoc.com and have bought a Celsior from Ben & Craig over at JSpec and have spoke to them many times. Mr. FunkyMonkey can vogue for me as well.

For shipping, I'm getting a quote of $120. It's a fairly large box since I've wrapped the pipes individually. My PayPal addy is [email protected]

Any questions, just shoot me a PM.

Thanks,

Ryan

Edited by berzerkled
Scooby Veteran

Scooby

Posted
Posted
Hehe no worries. I own www.jdmoc.com and have bought a Celsior from Ben & Craig over at JSpec and have spoke to them many times. Mr. FunkyMonkey can vogue for me as well.

For shipping, I'm getting a quote of $120. It's a fairly large box since I've wrapped the pipes individually. My PayPal addy is [email protected]

Any questions, just shoot me a PM.

Thanks,

Ryan

Hi Ryan,

Have sent a PM to Funky Monkey, can't find you on the jdmoc - there's a Berzerk but not Bezerkled.

Cheers

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • drifter17a
      R34 power steering

      By drifter17a · Posted

      I have done smoke test and can’t see any leak on high or low side.   checked pump and fluid can flow through. Removed the high pressure from steering and did smoke test and same on low side, no leak.   puzzled. Thinking why if it was all ok it suddenly went as car was off road for a year. Don’t want to disassemble pump yet as i can see fluid / air( compressor) can flow through with no issues
    • The Bogan
      Mistakes were made, my R34 Story

      By The Bogan · Posted

      Which manifold mate? Meanwhile......Mark is wondering how bonnet vents would look on the NC 🤣
    • luke gtr
      Hello Everyone

      By luke gtr · Posted

      Actually,  just remembered there should be info in the threads (somewhere) about swapping to a manual steering rack and deleting power steering all together. 
    • 180 wanabe
      Thinking of getting a Q50 300hp and just tuning it instead of getting the Q50 Red or 400R

      By 180 wanabe · Posted

      Also had a look at the Nissan JP website looks like the 400r has a slightly shorter ratio than than the regular V37 3.133 VS 2.937 which from a guy who has driven both 3.69 vs 4.11 ratios in the S15 is bugger all. Seems that the AUTO Z runs the same ratio as the 400R but can't find any info as to if its an open or LSD? More often than not the auto LSD is open
    • joshuaho96
      R34 power steering

      By joshuaho96 · Posted

      Do not replace the power steering lines with this stuff. If it's anything like the Chase Bays stuff it will leak and be worse than stock. The reason why the reservoir is on the LH/passenger side of the car is because that's just where the reservoir was most convenient to fit. Don't overthink this stuff. The intake/cold side of the engine is pretty busy on these cars. And again, the hardpipe is designed to be a janky power steering cooler. In theory you can replace it with a real power steering cooler but that's really only for track use where boiling the fluid is a distinct possibility. Start with the low pressure lines feeding the pump from the reservoir. Make sure there isn't a bunch of junk in the reservoir filter. Be careful to not get ATF all over the engine bay. I hate dealing with ATF spills, you can clean it up and the slightest crevice will still release more oil that can still drip over time. You also want to inspect for leaks before you make a mess and can't tell what happened. Most likely you have a leak somewhere that is allowing fluid out and air in. Failing that it's allowing air in but not fluid out. Only place I can really see that happening is on the low pressure side because the pump will pull a slight vacuum to draw fluid in. Everything after the pump is high pressure or lower pressure, approaching atmospheric by the time it returns to the reservoir.
×
×
  • Create New...