Jump to content
SAU Community

Recommended Posts

Hey guys this is near my first time posting here on SkyAus.

I just purchased a R32 GTR but i'm not new to turbo vehicles.

To be honest I don't know a whole lot about these things and yes ive been searching the forums etc.

It currently has a full 3" exhaust, aftermarket fmic, hks pods and coilovers.

In short I basically what the most power out of it with out spending over 1-2k.

Wan't to leave the turbo's alone.

Some things I have heard is power fc and a tune.. also cam gears?

Will be running a bleed valve around 12-13psi if the thing does a decent job. If not i guess ill be forced into buying a ebc.

Also what kind of power am I looking at? Thanks for your patience :( !

Link to comment
https://www.sau.com.au/forums/topic/175352-bang-for-buck-mods/
Share on other sites

Hey guys this is near my first time posting here on SkyAus.

I just purchased a R32 GTR but i'm not new to turbo vehicles.

To be honest I don't know a whole lot about these things and yes ive been searching the forums etc.

It currently has a full 3" exhaust, aftermarket fmic, hks pods and coilovers.

In short I basically what the most power out of it with out spending over 1-2k.

Wan't to leave the turbo's alone.

Some things I have heard is power fc and a tune.. also cam gears?

Will be running a bleed valve around 12-13psi if the thing does a decent job. If not i guess ill be forced into buying a ebc.

Also what kind of power am I looking at? Thanks for your patience :( !

Yeah PFC and EBC would be the way to go and with stock turbos that are really old you can run 14psi but eventually will blow and wreck ur engine and then u will end up spendin like 10k on a rebuild. So maybe you should consider getting a couple of hks gtss or maybe 2860-7's? but with stock turbos and healthy motor u would probably run about 250rwkw. Cam gears will give you more low and mid range gains

hey mate, youve definietely got the basic bolt on mods done. so the best thing to do is to up the boost as you plan to and get a Power fc with a tune. PM hanyou, as i think he is selling one at the moment. You should be able to do this within your price range of 1-2k. With a set of camgears, you should be hitting 250kws at the wheels.

Thanks thats some good info! Yeah thats why I said 12-13psi. 14psi might just push the old turbo's a little too far!!!!

So the power fc is definatly next on the list then. As for the cam gears I know they can cost a bit. Would I get as big of a improvement from the cam gears as I would the power fc with a tune?

250awkw with cam gears so what awkw would i be looking at with just the power fc and tune. Thanks again!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


×
×
  • Create New...