Vic: Delete Please

[FordyR31]

Hi guys i'm new here,

Basically i'm looking to do an RB25DET conversion in my HR31 GTS-X. I have had a few engine and gearbox packages comp tested but have been low. I am in the Northern Suburbs of Melbourne Vic

I am in need of.

RB25DET full motor including starter, Altenator, Turbo, Injectors, CAS etc etc

Manual ECU and FULL Wiring loom including throttle position sensor, oxy sensor, AFM, coilpacks and ignition module if S1 and temp sensors

RB25DET manual gearbox and decent clutch (can be standard just in decent condition for use)

Preferably the Yoke for the gearbox also so my tailshaft could be modded to fit.

Basically anything else I have left out to get the engine up and running in my car, carwill be engineered so standard parts needed.

Have had 3 failed comp tests and all engine packages were $3400 or less including one NEO 25DET. R33 S1 or S2 will do fine, preferably something thats in a car and can be seen and heard running i.e rear end wreck but as long as a compression test can be done in front of me and the engine is healthy i'd be happy.

Thanks guys

Liam

Edited July 15, 2007 by FordyR31

[Spoolup]

I have rb25 box, with yoke, clutch fork, slave cylinder etc.

email [email protected] if interested

In Bris

Cheers

[FordyR31]

I have rb25 box, with yoke, clutch fork, slave cylinder etc.

email [email protected] if interested

In Bris

Cheers

Thanx but I need the whole package all bolted together ready to be put into the car, get get the loom wired up and drive it out.

Liam

[FordyR31]

Bump I need a 25 soon b4 I buy a new car instead lol.

Liam

[sir31]

where u @....

[FordyR31]

where u @....

Melbourne, northern suburbs mate.

Liam

[Nisswreck]

we can help, please email us at [email protected]

thankyou

[FordyR31]

we can help, please email us at [email protected]

thankyou

I am looking at one this weekend, its all organised and the guy has gone to the trouble of putting back into a stacked 33 so i can hear it running and test it. Great price aswell... just wondering on what ur prices r for my whole conversion kit as I will be interested if this 25 fails a comp test on saturday, otherwise i'm pretty happy with the deal im getting from him should everything go as I would like it.

Thanx

Liam

[FordyR31]

Thanx for the help guys, I have found a S2 engine and gearbox with everyting i need, clutch, ecu, loom etc etc etc. Thread can be deleted.

Liam