Jump to content
SAU Community

Recommended Posts

Hay Everyone,

I was just wondering if anyone knows if you can put an RB26dett engine and gear box, including the front wheel drive into an R33 GTST. Cause I was thinking of doing it......

HAs this been done before? Are the engine mounts the same? Will the GTST drive shaft fit and do you have to replace the diff?

I can't wait to here what you guys think.

Cheers

Gold Rays

Link to comment
https://www.sau.com.au/forums/topic/17541-rb26dett-in-a-r33-gtst/
Share on other sites

Ive seen an RB26DETT (without the 4wd stuff) in a 4 door R33 and it wasnt as easy as just swapping everything over. It took about three days for a mechanic who specialises in skylines to iron out all the little problems. i think electrics were more of a problem than mechanical. it had bigger turbos, a powerfc and avcr too. that being said, make sure you reasearch it first....

I'd say it would be cheaper in the long run to sell your GTSt and buy a GTR.. Otherwise pick up a GTS4 and drop an RB26 into that, then you have ATTESA...

A mate of mine has put an RB26 into his GTS, engine dyno'd at over 700hp, thing is an animal in the dry in any gear... I like the grip of my GTR :D

Brett

i don't bother me if I can't get the FWD. I want to do what your mate did.

I heard you could buy some sort of 4WD kit for a GTST!!!

I will be doing all the installing work with help of a few mechanics for free, so i don't have to worry about the cost of that. Only the cost of the front cut.

Another question: Is the GTR chasis the same as a GTST?

Hi Gold Rays, last time I priced a half cut R33 GTR it was close enough to $12K, to that you would need to add the cost of an R33 GTR tail shaft, rear diff, rear uprights, brakes, drive shafts, suspension arms, fuel tank, fuel pump, rear outer guards, rear inner guards, panel beating, painting etc etc

Someone already said it, "I'd say it would be cheaper in the long run to sell your GTSt and buy a GTR"

Plus in the end you would still have a GTST, not a real GTR.

My thoughts anyway

All RB block patterns are the same so it should just bolt straight in. Don't know about the 4WD though.

And 1989 R32 GTR's are going for about 15K in Jap land ATM so you may want to just upgrade. Check out prestige motorsports mailing list.

http://www.prestigemotorsport.com.au/au/st...asp?StockID=833

If the link don't work just sign up.

Guest YZF-R1 Maniac

Here are another couple from Prestige motors. I have been receiving their emails for a while and they are getting really cheap.

http://www.prestigemotorsport.com.au/au/st...asp?StockID=892

http://www.prestigemotorsport.com.au/au/st...asp?StockID=897

Is that you Damien??(TasGTR)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I mean it's probably likely that people overestimate their skills in dialling in a setup and noticing the changes. I had SK shocks and springs, and added heavier springs and got them revalved by Sydney Shocks to suit based upon what I told them I wanted the car to handle like. I got back a completely different feeling set of shocks, which probably (?) feel great on track but holy hell are they rough on tram tracks and the like. The shock dyno actually looks pretty similar to Shockworks (from what I can surmise from a screenshot of a youtube video - and my dyno printout...) Truth be told I doubt I'd be any faster or slower with either setup, or camber/castor combination. I also had whiteline eccentric castor bushes up front of my R34. I removed them and put in poly non-adjustable ones to soothe my OCD (nobody ever set the castor the same side to side, and it'd be near impossible to do) and be happy the wheel is centered in the well now for clearance reasons. Yes I wanted it to move 1mm 'back' :p I've effectively set my castor back to stock, negating all the benefits of that which is supposedly massive. I've probably also altered toe and camber in a negative (detrimental) way. I can't tell any difference steering the car.
    • You reckon? I have to disagree. Notwithstanding that at some point we may all be forced to do this to our cars if we want to keep driving them, there is absolutely nothing about an electric-converted-previously-IC-car that is ever good. EVs that are built by OEMs on platforms that were originally IC already suck, let alone the shitty outcomes that result from doing it as a retro to something that was actually built as an IC car. This is because the platform really needs to be designed to house the battery in a useful place (ie, down as low as possible) and the motors are properly located relative to the wheels that they have to drive. Converted platforms already suck at this. But when you try to shove sufficient battery capacity into a previously IC car, you can't put it down on/in the floor, because that space doesn't exist. You can't find enough space where the fuel tank used to be (if it is an inboard fuel tank) and you don't want to hang it out behind the rear axle line if you had a rear fuel tank. And there's not enough space in the tunnel if you still want to use it for anything remotely like what it was originally used for. The engine bay is too big for a motor, and you'd really prefer that the motor for the rear wheels wasn't in the front engine bay anyway. And there's not enough room where the diff was for a proper man-sized E motor. And then.... there is the complete lack of soul and emotion that is provided by EVs. There are some cracking restomods out there. Like the Alfaholics GTA thingo. But it is petrol powered. Look at the alternative EV version of a GTA restomod by Totem. it is jaw droppingly beautiful. But by all reports is is objectively awful to drive, despite having 600 HP or something, simply because there is nothing there. It sounds like a sewing machine or a leaf blower. It should scream and wail and make the hairs on your neck stand up. Oh, and it's 1500 bloody kg in a car that was <900kg when new. GTRs are heavy enough as it is without pushing them up to 2tonnes worth of pork.
    • https://www.dezeen.com/2025/01/06/nissan-electric-r32-skyline-gt-r-godzilla-sports-car/   I reckon this is pretty cool. Lots of other Resto mods have turned to ev power.
    • hahaha @joshuaho96 the most action it gets is when I have to drive from West to SE VIC to meet the fam. Even then, it;s on highway cruising speeds
    • don't know anyone in this thread, but i just found it, read the entire thing in a few hours, realized greg is still posting progress, and just have to say, this is awesome. it looks awesome. 100% right about the Uras kit making it a pain to get on hoists...have the same kit on my 34 and it takes six 2x4s and race ramps to do it without taking parts off. this reminds me exactly of this thread. https://grassrootsmotorsports.com/forum/build-projects-and-project-cars/r63-amg-the-unicorn-of-my-destruction/110824/page8/
×
×
  • Create New...