Jump to content
SAU Community

Recommended Posts

Hey Guys, i've got my car up for sale, but i have been asked a couple of times wether i would seperate my new engine/turbo package. So here's the details.

CP Forged Pistons, Eagle Rods, Tomei Metal Head Gasket, All New Nissan Gaskets, Extensive Head Work, Head stud kit, N1 Oil Pump and Collar to suit, N1 Water Pump & Nismo Thermostat, HKS Step 1 Cams, HKS Cam Wheel, Z32 AFM, HKS GTRS Turbo, 555cc Injectors, Bosch Fuel Pump, Split Fire Coils. There is alot more that has gone into it, but this should give you an idea on the kind of quality parts that have been used. For exact specs on head work or any thing else please call me and i can put you in touch with the workshop who built it. I have spoken to many people with a similar setup who have 300rwkw on a sain amount of boost, so that is my aim. The above work/ parts cost me 20K,( with receipts) and has an engineers cert to boot.

Still just running in, so is available to hear/see running in my car. May also negotiate other components from my setup.

Price Looking for $10k + your old motor and turbo (must be running etc)

or $12k outright

post-3771-1183636871_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/175478-complete-built-rb25-800ks-old/
Share on other sites

Have a couple of people interested. But nothing solid yet, so still here waiting for YOU!!!

This is a guaranteed 300KW ATW package. Just ask thizzle on these forums, i've followed very closley followed his formula for sucess......Come get it..... :nyaanyaa:

Hey Guys, i've got my car up for sale, but i have been asked a couple of times wether i would seperate my new engine/turbo package. So here's the details.

CP Forged Pistons, Eagle Rods, Tomei Metal Head Gasket, All New Nissan Gaskets, Extensive Head Work, Head stud kit, N1 Oil Pump and Collar to suit, N1 Water Pump & Nismo Thermostat, HKS Step 1 Cams, HKS Cam Wheel, Z32 AFM, HKS GTRS Turbo, 555cc Injectors, Bosch Fuel Pump, Split Fire Coils. There is alot more that has gone into it, but this should give you an idea on the kind of quality parts that have been used. For exact specs on head work or any thing else please call me and i can put you in touch with the workshop who built it. I have spoken to many people with a similar setup who have 300rwkw on a sain amount of boost, so that is my aim. The above work/ parts cost me 20K,( with receipts) and has an engineers cert to boot.

Still just running in, so is available to hear/see running in my car. May also negotiate other components from my setup.

Price Looking for $10k + your old motor and turbo (must be running etc)

or $12k outright

hey

interested in selling just the bottom end with n1 oil and water pump, tomei head gasket?

send me a msg or call after 5:30 if you like, im keen depending on price

interested to know what price (if seperating) for block and head itself. Dont need injectors, plenum, turbo, coil packs, exhaust manifold.

Thanks

Second that (but I want injectors)

Thanks

  • 2 weeks later...
  • 2 weeks later...
  • 2 weeks later...
if you decide to separate, interested in the turbo if it's only done 800k and it's reasonably priced

keen on injectors and splitfires also if only 800 k old and of course the right price.

Cheers

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • GTSboy, thank you again. i’ve been reading all the other SAU RB25 vacuum line threads and you have the utmost patience for people asking “where do my vacuum lines go”. it’s appreciated. i did also enlist a few other RB guys local to me.  i would like to run 5 to 4. turbo pressure side to wastegate actuator. i would like to run 3 to 1. power steering air valve line to intercooler outlet. (this is how it was previously). i was told 2 is the bleed port for the boost solenoid - which i’m not running - so should be capped.   anyone see any problems with that?    
    • So yes. All of them. Something like 98% of all fuel in the USA has 10% ethanol: https://afdc.energy.gov/fuels/ethanol-fuel-basics It's labelled as like, AKI, 87, 91, 93 with an E10 or E5 or E15 label on the pump. At a certain point, it's not just "E10" instead of 91. It is 91, 95, 98, and all of them have 10% Ethanol in them. You can also get E85 and E30 which is why you do see some people rolling around with E30 tunes in them.
    • Thanks for the response. This is an 04 EP3 Type R. JDM spec. Fairly certain they're just basic BC racing coils. I do plan to keep as the ride quality on stock I've been told is pretty meh given Sydney roads. If I were to go down that avenue, does NSW require them to be a certain spec (close to original) etc?
    • Should have asked what is the car?
    • I've had two super conflicting experiences with blue slips. My 30 year old E39 waltzed through with no issues but my brother in law was knocked back on 12 y/o 3 series due to wiper blades and some cracking in a control arm bush.  What kind of coil overs? Do you want to keep them after?  If it was me I'd get some dirt cheap shocks and springs from eBay or scumtree. Not ideal but will get you over the line and might even be less than $1k.
×
×
  • Create New...