Jump to content
SAU Community

Importing A Pre Owned Car


Recommended Posts

Guys,

a quick question about importing a car i have owned for over 12 months.

The problem is that its a track car only and has not been registered at any time i owned it. I brought it as a very very second hand junker sitting in the sun for 3 years, i have the import papers for this car from the import yard i purchased it from in the UAE.

Now my question is can this car be brought back to Australia as a personal import even though it is a track / race car.

I have all the reciepts from the parts i have brought for this car and workshops that have done work on it during this time frame. I even have the reciepts for the times the car has been entered into events in the UAE. I have my local FIA national racing licence here in the UAE, would i need anything else to import the car back to Australia.

Link to comment
Share on other sites

you could certainly import it as a race only car to aus, but the only people who can properly answer this question for you are DOTARS. My advice would be 2 things. ask dotars for advice, and secondly register the car in UAE before you leave.

Link to comment
Share on other sites

BB not possible to register the car in the UAE without converting to LHD.

I have spoken with DOTARS and they dont know either! The person i spoke to said they would get back to me about 3 months ago, glad i wasnt holding my breath.

My understanding is that i only need to prove i own it which i can do and that i use it which i can also prove as i have reciepts from over 12 months ago showing both entry into events, parts and repairs to the car during the 12 month period.

Link to comment
Share on other sites

BB not possible to register the car in the UAE without converting to LHD.

I have spoken with DOTARS and they dont know either! The person i spoke to said they would get back to me about 3 months ago, glad i wasnt holding my breath.

My understanding is that i only need to prove i own it which i can do and that i use it which i can also prove as i have reciepts from over 12 months ago showing both entry into events, parts and repairs to the car during the 12 month period.

well how the hell did the RHD japanese car end up in the UAE in the first place if it couldnt be registered?

Theoretically you could ship it back as a race only import, and provide the details from where it came. I didnt think registration had anything to do with it...

Edited by m3gtr
Link to comment
Share on other sites

I imported a car as a personal import last year and DOTARS seemed pretty relaxed about the paperwork. Things like official translations and car parking permits are on the list of paperwork you have to submit but I tried with out them and I got approval.

Not sure if this helps.

Link to comment
Share on other sites

I'm pretty sure you can bring it in as a personal import....for example someone was looking at bringing a R390 to aus under the same rules lol. If you get rejected or a definate no from DOTARS it can definately come in as race only use but then it can never be registered except as a dedicated rally car

dodgybrooks they want the parking permits etc to prove you owned it for 12 months, and they are familiar with jap regs....pretty sure they won't be with UAE rules!

Link to comment
Share on other sites

WHAT RULES :-)

And they use to convert them to LHD to drive but they stopped that unless you know the right people.

Few pic of my mates R34 GTR

post-28646-1184010214_thumb.jpg

post-28646-1184010256_thumb.jpg

post-28646-1184010283_thumb.jpg

Edited by tacker
Link to comment
Share on other sites

dodgybrooks they want the parking permits etc to prove you owned it for 12 months, and they are familiar with jap regs....pretty sure they won't be with UAE rules!

Yea I'd say DOTARs see a few more cars coming from Japan than the UAE. But the point was they seem pretty lax. I'd send in your 50bux, the paperwork you have and see how you go.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



  • Similar Content

  • Latest Posts

    • Much less twat-tastic. CF wheels are too garish for civilised use.
    • From there, as the manual says....assembly is the reverse of disassembly, no tricks worth mentioning Much better (for me)
    • In my case, the standard wheel I had was in good condition but the buttons had more wear, so I swapped them across from the original wheel from the car. The plastic rear cover is held on by 4 tabs, and once the wiring is removed you can get access to 2 screws on each side the hold the buttons in From there I just swapped the wiring over. What was interesting is the standard style wheel is 2.0kg but the carbon fibre one is 50% heavier at 2.9kg. It even has a weight inside the wheel at the top to make up for some sort of imbalance in the design. weird
    • Once the airbag is off, to remove the steering wheel.... Undo the 2 plugs into the clock spring, and the horn connector from it's clip. Hit the 19mm nut with a rattle gun (preferably) or if you don't' have one, you probably want an assistant to hold the wheel in place while you use a breaker bar to undo the nut Then, screw the nut back on 3 turns, and pull the wheel sharply towards you. If that doesn't work hit it medium force with a rubber mallet on either side, or possible behind if you can get there. If that all fails (it shouldn't!) you might need a steering wheel puller
    • So, to next task....the carbon fibre steering wheel was either an expensive factory option or a chinesium special. Either way, I don't like either the flat bottom or thick ring style, so it had to go So...to remove the steering wheel.... First, disconnect battery negative and stomp on the brake pedal for a few seconds. Then, remove the small circular covers on each side of the wheel's rear surround to uncover the airbag clips. You need to push something like a flat bladed screw driver through, to push the steel clip inwards and pull the side of the airbag forward. Once you've done the easy side, same on the centre console side. You can see the tab you are shooting for circled in red Then, disconnect the horn spade connector and for the yellow airbag plug you need to get something small under the black locking tab to pop it out, then the connector releases......airbag is off  
×
×
  • Create New...