Jump to content
SAU Community

Work I Should Do While My Engine Is Out...

Dvus R31

By Dvus R31,
in General Maintenance

 Share

Recommended Posts

Dvus R31 Contributor

Dvus R31

Posted
Posted

Hey all,

I just pulled the engine out of my R33 half cut last night, and I'm wondering what maintenance work I should be doing to the engine while everything is accessable. I plan on replacing the timing belt, rear main seal and some radiator hoses but I know there's probably other stuff that's worth doing so I was wondering if the technical guys could give me some advice about this. Thanks in advance for any input.

Cheers,

Jono

axe s Experienced

axe s

Posted
Posted
Hey all,

I just pulled the engine out of my R33 half cut last night, and I'm wondering what maintenance work I should be doing to the engine while everything is accessable. I plan on replacing the timing belt, rear main seal and some radiator hoses but I know there's probably other stuff that's worth doing so I was wondering if the technical guys could give me some advice about this. Thanks in advance for any input.

Cheers,

Jono

i'd be checking the exhaust manifold studs as they quite often have some snapped ones, and they are alot easier to drill out of your head when you have it out. and oil pump, coz once u get the engine back in it will be a pain in the arse to lift it again to drop the sump and change the oil pump... just some things i can think of...

Good luck with the conversion...

axe s Experienced

axe s

Posted
Posted
Water pump?

I did my water pump and oil pump when I did my timing belt but in the car.

yeh agree with abo bob

Do the water pump and idler pullies EX cam gear if u want one on if you do that do the cam seals ect...

msnismo Grand Master

msnismo

Posted
Posted

I'd do all the hoses.... once ones lets go they all start to go in rapid fire :) If your running the standard plenum you can bet the ones underneath and at the rear will be the first to go.... much easier to replace them all while its out of the car!

Dvus R31 Contributor

Dvus R31

Posted
  • Author
Posted

Cool thanks a mill everyone for the suggestions, and good call made_guy, that's up there on the priorities list. Would've been nice to get an engine bay respray but funds don't permit atm. Thanks again dudes, will post some pics when the conversion is done :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • RP1421
      S15 Spec R

      By RP1421 · Posted

      Update time!  The JZX110 had some maintenance needing to be done, so a lot of the seals with replaced to fix some oil leaks. Also used this opportunity to whack on a front mount that I'd bought some time ago.  I also finally got the rear lip painted and fitted.  I then got the exhaust done. It's just a catback for now. Custom made 3" stainless with a turn down. I could have a tip coming out, but it will require cutting the rear lip and possibly the bumper itself. So far I do like and it's made the car a little more zippy.  Close out with some nice pictures of the cars and a sneak peek of what's next. 
    • MBS206
      Can't put strut back

      By MBS206 · Posted

      Once you learn it all, you find you do the job once. But this is the best way to learn, as you won't forget the lessons
    • Rezz
      Anyone know what this front bar is for series 1 R33??

      By Rezz · Posted

      Edit: It's now known as "R Performance" and is still in operation.
    • PranK
      The FD RX7 is the best looking 90's JDM car

      By PranK · Posted

      This lady loved her FD for 25 years!  https://www.topspeed.com/80-year-old-woman-donates-fd-rx-7-mazda/ My brother in law. He's nice enough to let me drive it whenever. He'll likely not see this, but I'll try: @r-is-for-fun got any pics?
    • Rezz
      Anyone know what this front bar is for series 1 R33??

      By Rezz · Posted

      Just something I found searching for more info on Emotion R, apparently the ECR33 Skyline GTS25t was either originally black, or there were two of them, the black one being the original demo car, then building a white one which was part of the 1997-onwards (to at least 2008!) Cockpit Tatebayashi Tokyo Auto Salon booth demo cars. It appears that Emotion R closed down in 2008 and was declared bankrupt in 2010: http://bank-db.com/hasan/208365. Scan of a magazine with the black R33 from 1996: Wayback machine archived page from May, 2000: https://web.archive.org/web/20000529061027/http://www.emotion-r.co.jp/skyline.html Option magazine with a few photos from the Cockpit Tatebayashi booth at the Auto Salon from various years: 2002: http://www.jdm-option.com/photo/index.php?action=item&category_id=154&image_id=3507 2003: http://www.jdm-option.com/photo/index.php?action=item&category_id=137&image_id=3033 2005: http://www.jdm-option.com/photo/index.php?action=item&category_id=116&image_id=1831 In 2008 Cusco website mentions that the Cockpit Tatebayashi ECR33 was displayed at that year's Tokyo Auto Salon: https://www.cusco.co.jp/event/2008/12/post_735.html As of 2021 it appears that the ECR33 demo car ended up being exported to Florida, USA: https://rmcmiami.com/inventory/1996-nissan-skyline-r33-cockpit-tatebayashi-demo-car-big-te06-turbo-endless-brakes-lsd-450hp/ And finally here's Google streetview of the Emorion R garage in 2023 which is amazingly not only still there, but the showroom is still full of various parts in stock and funishings, etc.: https://maps.app.goo.gl/ttyEAZdZLyzermyT9 Apologies for nerding out a bit. I used to love doing this 20 years ago on SAU and got a bit nostalgic for a moment... 😅
×
×
  • Create New...